Abstract:Glucose biosensors are widely used for clinical, industrial, and environmental applications. Nonenzymatic electrochemical glucose biosensors based on metal oxides with a perovskite structure have exhibited high sensitivity, excellent stability, and cost efficiency. In this work, porous La-Sr-Co-Ni-O (LSCNO) nanofibers, with an ABO(3)-type perovskite structure, were prepared through optimizing the A-site and B-site elements by electrospinning, followed with calcination at 700 degrees C for 5 h. Characterized by scanning and transmission electron microscopy, X-ray diffraction, and X-ray photoelectron spectroscopy, fabricated nanofibers were confirmed to be porous and nanosized polycrystalline grains with high crystallinity. A novel La0.75Sr0.25Co0.5Ni0.5O3-based nonenzymatic electrochemical biosensor was developed, which is sensitive to glucose because of an electrochemically catalytic mechanism, a mediated electron transfer involving Ni(ii)/Ni(iii) or Co(ii)/Co(iii), accompanying with gluconic acid complexation. The glucose biosensor presented a linear response in the range of 0.1-1.0 mM with a calibration sensitivity of 924 +/- 28 mu A mM(-1), a proportion of the variance of 0.9926, and a lower limit of detection of 0.083 mM, respectively, demonstrating an outstanding analytical performance. The biosensor showed no response to the most widely used anionic surfactant, sodium dodecyl sulfate, and low sensitivity to other biomolecules, such as fructose, lactose, galactose, mannose, dopamine, and ascorbic acid. A urine sample was tested by this novel nonenzymatic electrochemical biosensor by standard addition method, suggesting a potential application for clinical test.

Electrospun Porous ZnO Nanofibers for Glucose Biosensors

A Single Zno Nanofiber-Based Highly Sensitive Amperometric Glucose Biosensor

ZnO Nanorods/au Hybrid Nanocomposites for Glucose Biosensor.

An Amperometric Glucose Biosensor Based on the Immobilization of Glucose Oxidase on the ZnO Nanotubes

Synthesis of Mesoporous Multiwall ZnO Nanotubes by Replicating Silk and Application for Enzymatic Biosensor.

Ultrasensitive non-enzymatic glucose sensor based on three-dimensional network of ZnO-CuO hierarchical nanocomposites by electrospinning

Synthesis of mesoporous grooved ZnFe 2 O 4 nanobelts as peroxidase mimetics for improved enzymatic biosensor

Electrospun porous La-Sr-Co-Ni-O nanofibers for highly sensitive non-enzymatic glucose detection

Preparation of ZnO Nanoparticles in a Reverse Micellar System and Their Application in Glucose Biosensor

Synthesis of ZnO Nanobundles Via Sol–Gel Route and Application to Glucose Biosensor

Immobilization and direct electrochemistry of glucose oxidase on a tetragonal pyramid-shaped porous ZnO nanostructure for a glucose biosensor.

CuO/Cu2O nanofibers as electrode materials for non-enzymatic glucose sensors with improved sensitivity

Amperometric glucose biosensor based on a surface treated nanoporous ZrO 2/Chitosan composite film as immobilization matrix

A novel non-enzymatic glucose sensor based on nickel (II) oxide electrospun nanofibers.

A Glucose Sensor Based on Glucose Oxidase Immobilized by Electrospinning Nanofibrous Polymer Membranes Modified with Carbon Nanotubes

Porous Co 3 O 4 nanosheets as a high-performance non-enzymatic sensor for glucose detection

Highly Sensitive Enzyme-Free Glucose Sensor Based on CuO–NiO Nanocomposites by Electrospinning

Electrospun palladium (IV)-doped copper oxide composite nanofibers for non-enzymatic glucose sensors

Highly Efficient Biosensors by Using Well-Ordered ZnO/ZnS Core/Shell Nanotube Arrays.

Three-dimensional Macroporous Carbon Supported Hierarchical ZnO-NiO Nanosheets for Electrochemical Glucose Sensing

Three-dimensional network films of electrospun copper oxide nanofibers for glucose determination.