Abstract:The hybrid electrode of single-wall carbon nanotubes (SWCNTs)/Cu2O/ZnO nanorods (NRs)/graphene used on the current-response nonenzymatic glucose sensor was investigated herein, regarding the mechanism of the formation of functional channel. The synthesis of the hybrid electrode involved four steps. First, the graphene was grown by chemical vapor deposition (CVD) and then wet-transferred onto indium transparent oxide (ITO) glass. Second, a zinc oxide (ZnO) seed layer was sputtered onto the graphene/ITO glass, and ZnO NRs were gradually grown by the hydrothermal method. Third, the ZnO NRs were clad with cuprous oxide (Cu2O) by the electrochemical method. Fourth, the SWCNTs were dropped onto the Cu2O surface, with a Nafion surfactant. X-ray diffraction spectra, scanning electron microscopy spectra, Raman spectra, cyclic voltammograms, and amperometric response diagrams were used to verify the performance of the device. Results showed that sensitivity increased significantly from 11.2 to 289.8 μA mM–1 cm–2, linear range increased significantly from 0.6 to 11.1 mM, and the coefficient of determination (R2) increased from 0.9766 to 0.9923, all by the addition of the SWCNTs/Cu2O functional channel mechanism and without graphene. When the graphene was added to the functional channel electrode, sensitivity increased again from 289.8 to 466.1 μA mM–1 cm–2 at low concentrations.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c07943?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c07943</a>.Deposition parameters of the ZnO seed layer, deposition parameters of the chronoamperometry method, fabrication process of wet transfer of graphene onto ITO glass, ZnO NRs grown with the hydrothermal method, fabrication process of Cu2O on the ZnO NRs by the electroplated method, and fabrication process of SWCNTs onto Cu2O/ZnO NRs (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c07943/suppl_file/am0c07943_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Amperometric glucose sensor based on catalytic reduction of dissolved oxygen at soluble carbon nanofiber.

In Situ Fabrication of Cobalt Nanoflowers on Sulfonated and Fluorinated Poly (arylene Ether Ketone-Benzimidazole) Template Film for the Electrocatalytic Oxidation of Glucose

A Highly Sensitive Nonenzymatic Glucose Sensor Based on Cu/Cu2O Composite Nanoparticles Decorated Single Carbon Fiber

Co-immobilization of glucose oxidase and xylose dehydrogenase displayed whole cell on multiwalled carbon nanotube nanocomposite films modified electrode for simultaneous voltammetric detection of D-glucose and D-xylose.

Detection of NADH and ethanol based on catalytic activity of soluble carbon nanofiber with low overpotential.

Direct Decoration of Carbon Nanohorns with Binary Nickel-Cobalt Sulfide Nanosheets Towards Non-Enzymatic Glucose Sensing in Human Fluids

Electrochemical Properties Analysis of Immobilized Glucose Oxidase on Multi-Walled Carbon Nanotubes and Hydroxy-Fullerene Nanocomposites

A Non-Enzymatic Glucose Sensing Based on Hollow Cuprous Oxide Nanospheres in A Nafion Matrix

Mn3O4/NiO Nanoparticles Decorated on Carbon Nanofibers as an Enzyme-Free Electrochemical Sensor for Glucose Detection

Glucose biosensors based on nano-composites of multi-walled carbon nanotubes and zinc oxide nanorods

A glucose biosensor based on electrodeposition of palladium nanoparticles and glucose oxidase onto Nafion-solubilized carbon nanotube electrode

A glucose biosensor based on direct electrochemistry of glucose oxidase immobilized on nitrogen-doped carbon nanotubes.

A miniaturized glucose biosensor based on the coimmobilization of glucose oxidase and ferrocene perchlorate in nafion at a microdisk platinum electrode

CuO nanostructures on N-doped carbon cloth for flexible enzyme-free glucose sensing

Multifunctional carbon nanotubes for direct electrochemistry of glucose oxidase and glucose bioassay.

A Single Zno Nanofiber-Based Highly Sensitive Amperometric Glucose Biosensor

Glucose biosensor using non-woven single-walled carbon nanotube films

Functionalization of Carbon Nanofibers with an Aromatic Diamine: Toward a Simple Electrochemical-Based Sensing Platform for the Selective Sensing of Glucose

Functional Channel of SWCNTs/Cu 2 O/ZnO NRs/Graphene Hybrid Electrodes for Highly Sensitive Nonenzymatic Glucose Sensors

Amperometric Glucose Biosensor Based on Silver Nanowires and Glucose Oxidase

Glucose biosensor based on glucose oxidase immobilized on a nanofilm composed of mesoporous hydroxyapatite, titanium dioxide, and modified with multi-walled carbon nanotubes