Abstract:A new strategy for fabricating a sensitivity-enhanced glucose biosensor was presented, based on multi-walled carbon nanotubes (CNT), Pt nanoparticles (PtNP) and sol–gel of chitosan (CS)/silica organic–inorganic hybrid composite. PtNP-CS solution was synthesized through the reduction of PtCl62− by NaBH4 at room temperature. Benefited from the amino groups of CS, a stable PtNP gel was obtained, and a CNT–PtNP–CS solution was prepared by dispersing CNT functionalized with carboxylic groups in PtNP–CS solution. The CS/silica hybrid sol–gel was produced by mixing methyltrimethoxysilane (MTOS) with the CNT–PtNP–CS solution. Then, with the immobilization of glucose oxidase (GOD) into the sol–gel, the glucose biosensor of GOD–CNT–PtNP–CS–MTOS–GCE was fabricated. The properties of resulting glucose biosensor were measured by electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV). In phosphate buffer solutions (PBS, pH 6.8), nearly interference free determination of glucose was realized at low applied potential of 0.1V, with a wide linear range of 1.2×10−6 to 6.0×10−3M, low detection limit of 3.0×10−7M, high sensitivity of 2.08μAmM−1, and a fast response time (within 5s). The results showed that the biosensor provided the high synergistic electrocatalytic action, and exhibited good reproducibility, long-term stability. Subsequently, the novel biosensor was applied for the determination of glucose in human serum sample, and good recovery was obtained (in the range of 95–104%).

Platinum Nanoparticles-Doped Sol–gel/carbon Nanotubes Composite Electrochemical Sensors and Biosensors

Pt Nanoparticles Inserting in Carbon Nanotube Arrays: Nanocomposites for Glucose Biosensors

Electrochemical Biosensing Platform with Carbon Nanotubes Incorporated into Platinum Nanoparticle-loaded Chitosan/Sol-gel Derived Composite Matrix

Electrochemical biosensing utilizing synergic action of carbon nanotubes and platinum nanowires prepared by template synthesis.

Glucose Biosensor Based on Electrodeposition of Platinum Nanoparticles Onto Carbon Nanotubes and Immobilizing Enzyme with Chitosan-Sio2 Sol-Gel

Glucose biosensors based on platinum nanoparticles-deposited carbon nanotubes in sol-gel chitosan/silica hybrid.

Nanocomposite based on depositing platinum nanostructure onto carbon nanotubes through a one-pot, facile synthesis method for amperometric sensing.

Amperometric Glucose Biosensor Based on Platinum Nanoparticles Combined Aligned Carbon Nanotubes Electrode

Seed-mediated growth of platinum nanoparticles on carbon nanotubes for the fabrication of electrochemical biosensors

A new amperometric glucose biosensor based on platinum nanoparticles/polymerized ionic liquid-carbon nanotubes nanocomposites

Facile Synthesis of Platinum Nanoparticle-Containing Porous Carbons, and Their Application to Amperometric Glucose Biosensing

Glucose biosensor based on Pt nanoparticles modified aligned carbon nanotubes electrode

Amperometric Glucose Biosensor Based on Electrodeposition of Platinum Nanoparticles Onto Covalently Immobilized Carbon Nanotube Electrode.

Amperometric Biosensors Based on Platinum Nanowires

Preparation of Carbon Nanotubes Supported Platinum Nanoparticles by an Organic Colloidal Process for Nonenzymatic Glucose Sensing

Amperometric Glucose Biosensor Based on Adsorption of Glucose Oxidase at Platinum Nanoparticle-Modified Carbon Nanotube Electrode

Study of the Nonenzymatic Glucose Sensor Based on Highly Dispersed Pt Nanoparticles Supported on Carbon Nanotubes

An Amperometric Glucose Biosensor Fabricated with Pt Nanoparticle-Decorated Carbon Nanotubes/tio2 Nanotube Arrays Composite

Electrochemical Biosensor Based on Multi-Walled Carbon Nanotubes and Au Nanoparticles Synthesized in Chitosan

Biosensors Based on Carbon Nanotubes/Nickel Hexacyanoferrate/Glucose Oxidase Nanocomposites

Nanoporous Carbon Nanofibers Decorated with Platinum Nanoparticles for Non-Enzymatic Electrochemical Sensing of H2O2