Abstract:The effect of composition tuning on glass forming ability (GFA), mechanical properties and atomic structure in ZrxCo84−xAl16 bulk metallic glasses (BMGs) with x = 51–58 has been investigated by using copper-mold suction casting, nanoindentation, high-energy X-ray diffraction, extended X-ray absorption fine structure experiments and ab initio molecular dynamics simulations, respectively. It is found that GFA firstly increases then decreases with increasing Zr content, exhibiting a maximum diameter of 7 mm with the Zr content of 55 and 56, while an abrupt reduction of bending plasticity occurs as the Zr content drops below 55. Both experimental and theoretical results find that GFA is remarkably enhanced, due to the abnormal reduction in the fractions of the Co-centered ⟨0, 2, 8, 1⟩, ⟨0, 3, 6, 2⟩ and ⟨0, 3, 6, 3⟩ polyhedra, and the denser atomic packing of Zr atoms around center Co atom, as the Zr content increases from 51 to 56. Meanwhile, the simultaneously improved plasticity is associated with the increased Co-centered ⟨0, 3, 6, 0⟩, and Al-centered ⟨0, 2, 8, 1⟩ and ⟨0, 3, 6, 2⟩ polyhedra, which provide more fertile sites for the nucleation of shear transformations. Further Zr addition to 58 increases remarkably the fractions of Zr- and Al-centered ⟨0, 1, 10, 2⟩ and ⟨0, 3, 6, 4⟩ polyhedra, and causes looser atomic packing of Co atoms around center Zr atom, leading to the reduction in GFA. However, the plasticity is not enhanced further but remains nearly constant, which may be related to the deteriorated effect on plasticity of the decreased fractions of Zr-centered ⟨0, 1, 10, 5⟩ and Co-centered ⟨0, 3, 6, 0⟩ polyhedra, and the increased fractions of Zr-centered ⟨0, 1, 10, 3⟩ and ⟨0, 2, 8, 4⟩ and Co-centered ⟨0, 2, 8, 0⟩ polyhedra. Compositional tuning, with internal structure tuned to favor both GFA and plastic flow, offers new possibilities in developing ductile BMG materials.

Plasticity improvement of Zr<sub>55</sub>Al<sub>10</sub>Ni<sub>5</sub>Cu<sub>30</sub>bulk metallic glass by remelting master alloy ingots

Plasticity improvement of Zr55Al10Ni5Cu30 bulk metallic glass by remelting master alloy ingots

Enhancing strength and plasticity of Zr-based bulk metallic glasses by Zr partially substituted Fe and isothermal annealing

Enhancement of Plasticity in Zr-based Bulk Metallic Glasses

Effect of Cooling Rate on the Bending Plasticity of Zr55Al10Ni5Cu30 Bulk Metallic Glass

Incorporation of ultrafine nanograins in Zr–Cu–Al–Ni–Co bulk metallic glass enabling significantly improved mechanical properties

Enhanced mechanical properties of Zr65Cu15Ni10Al10 bulk metallic glass by simultaneously introducing surface grooves and multiple shear bands

Pronounced Ductility in CuZrAl Ternary Bulk Metallic Glass Composites with Optimized Microstructure Through Melt Adjustment

Improving plasticity of the Zr46Cu46Al8 bulk metallic glass via thermal rejuvenation

A Plastic Zr–Cu–Ag–Al Bulk Metallic Glass

Improve plasticity of Zr-based metallic glass by surface treatment

Substantially enhanced plasticity of bulk metallic glasses by densifying local atomic packing

Glass forming ability and bending plasticity evolutions in Zr-Co-Al bulk metallic glasses and their structural origin

Enhanced Plasticity in Zr–Cu–Ag–Al–Be Bulk Metallic Glasses

The Coupling Effect of Small Nanocrystals and Free Volume on the Ductility of Cu46Zr47Al7 Bulk Metallic Glass Alloy

A Plastic FeNi-based Bulk Metallic Glass and Its Deformation Behavior

Effect of Surface Roughness on Plasticity of Zr52.5cu17.9ni14.6al10ti5 Bulk Metallic Glass

Improving fatigue property of Zr–Ni–Al metallic glass by tailoring chemical composition with high structure stability

Enhancement of Glass-Forming Ability and Plasticity Via Alloying the Elements Having Positive Heat of Mixing with Cu in Cu48Zr48Al4 Bulk Metallic Glass

Controlling the Mechanical Properties of Bulk Metallic Glasses by Superficial Dealloyed Layer

Superplasticity and Superplastic Forming Ability of a Zr–Ti–Ni–Cu–Be Bulk Metallic Glass in the Supercooled Liquid Region