Abstract:The effect of composition tuning on glass forming ability (GFA), mechanical properties and atomic structure in ZrxCo84−xAl16 bulk metallic glasses (BMGs) with x = 51–58 has been investigated by using copper-mold suction casting, nanoindentation, high-energy X-ray diffraction, extended X-ray absorption fine structure experiments and ab initio molecular dynamics simulations, respectively. It is found that GFA firstly increases then decreases with increasing Zr content, exhibiting a maximum diameter of 7 mm with the Zr content of 55 and 56, while an abrupt reduction of bending plasticity occurs as the Zr content drops below 55. Both experimental and theoretical results find that GFA is remarkably enhanced, due to the abnormal reduction in the fractions of the Co-centered ⟨0, 2, 8, 1⟩, ⟨0, 3, 6, 2⟩ and ⟨0, 3, 6, 3⟩ polyhedra, and the denser atomic packing of Zr atoms around center Co atom, as the Zr content increases from 51 to 56. Meanwhile, the simultaneously improved plasticity is associated with the increased Co-centered ⟨0, 3, 6, 0⟩, and Al-centered ⟨0, 2, 8, 1⟩ and ⟨0, 3, 6, 2⟩ polyhedra, which provide more fertile sites for the nucleation of shear transformations. Further Zr addition to 58 increases remarkably the fractions of Zr- and Al-centered ⟨0, 1, 10, 2⟩ and ⟨0, 3, 6, 4⟩ polyhedra, and causes looser atomic packing of Co atoms around center Zr atom, leading to the reduction in GFA. However, the plasticity is not enhanced further but remains nearly constant, which may be related to the deteriorated effect on plasticity of the decreased fractions of Zr-centered ⟨0, 1, 10, 5⟩ and Co-centered ⟨0, 3, 6, 0⟩ polyhedra, and the increased fractions of Zr-centered ⟨0, 1, 10, 3⟩ and ⟨0, 2, 8, 4⟩ and Co-centered ⟨0, 2, 8, 0⟩ polyhedra. Compositional tuning, with internal structure tuned to favor both GFA and plastic flow, offers new possibilities in developing ductile BMG materials.

Effect of Surface Roughness on Plasticity of Zr52.5cu17.9ni14.6al10ti5 Bulk Metallic Glass

Improve plasticity of Zr-based metallic glass by surface treatment

Enhanced mechanical properties of Zr65Cu15Ni10Al10 bulk metallic glass by simultaneously introducing surface grooves and multiple shear bands

Enhancement of Plasticity in Zr-based Bulk Metallic Glasses

Mechanical Properties of Monolithic Zr62Al8Ni13Cu17 Bulk Metallic Glass

Controlling the Mechanical Properties of Bulk Metallic Glasses by Superficial Dealloyed Layer

Plasticity improvement of Zr55Al10Ni5Cu30 bulk metallic glass by remelting master alloy ingots

Plasticity improvement of Zr<sub>55</sub>Al<sub>10</sub>Ni<sub>5</sub>Cu<sub>30</sub>bulk metallic glass by remelting master alloy ingots

Effect of Microstructures on the Compressive Deformation and Fracture Behaviors of Zr47Cu46Al7 Bulk Metallic Glass Composites

Microstructural heterogeneities governing the deformation of Cu47.5Zr47.5Al5 bulk metallic glass composites

Superplasticity and Superplastic Forming Ability of a Zr–Ti–Ni–Cu–Be Bulk Metallic Glass in the Supercooled Liquid Region

The Effect of Primary Crystallizing Phases on Mechanical Properties of Cu46zr47al7 Bulk Metallic Glass Composites

Investigation of Deformation Behavior of Zr-Ti-Ni-Cu-Be Bulk Metallic Glass Containing Nanocrystals

Enhancing strength and plasticity of Zr-based bulk metallic glasses by Zr partially substituted Fe and isothermal annealing

The Effects of Thin Coatings on the Mechanical Properties and Resistance to Annealing-Induced Embrittlement of Bulk Metallic Glass

Work Toughening Effect in Zr 41 Ti 14 Cu 12.5 Ni 10 Be 22.5 Bulk Metallic Glass

Improving plasticity of the Zr46Cu46Al8 bulk metallic glass via thermal rejuvenation

A Plastic Zr–Cu–Ag–Al Bulk Metallic Glass

Substantially enhanced plasticity of bulk metallic glasses by densifying local atomic packing

Glass forming ability and bending plasticity evolutions in Zr-Co-Al bulk metallic glasses and their structural origin

Microstructure evolution and mechanical properties of Cu46Zr47Al7 bulk metallic glass composite containing CuZr crystallizing phases