Design of the Integrative Boiler of Coal Gasification and Combustion with Double Furnace and Fixed Grate

DONG Peng

DOI: https://doi.org/10.3969/j.issn.1004-8774.2006.03.003

2006-01-01

Abstract:The technical mechanism of the integrative boiler of coal gasification and combustion with double furnace and fixed grate was introduced,and the testing data in thermal performance and pollutant discharged of the boiler was presented,

What problem does this paper attempt to address?

Design of the Integrative Boiler of Coal Gasification and Combustion with Traveling Grate

DONG Peng

DOI: https://doi.org/10.3969/j.issn.1004-8774.2005.05.007

2005-01-01

Abstract:In this paper,the technical mechanism of the integrative boiler of coal gasification and combustion with traveling grate was introduced,and the testing data in thermal performance and pollutants discharged of the boiler was presented.
Examination of Industrial Demonstration Unit of Coal Gasification for Pulverized Coal with Ash Agglomeration Technique

Yong He

2003-01-01

Abstract:This paper discribes test results of an industrial demonstration plant using ash agglomeration fluid bed for gasification of pulverized coal.Use of the fluidization technology in the presence of oxygen steam mixture as a promotor in the engineering that deals well with establishment of fluid bed,dedusting and slag discharge at elevated temperatures,application of high temperature resistant valves and abrasion resistant refractories,and recovery of waste heat.Compared with fixed bed gasification process,the cost per tone of ammonia can be reduced by 172 Yuan,resulting in better economic and environmental benefits.
STUDY ON ELIMINATING FIRE-CARRYING IN PRIMARY AIR JET ORIFICE BY ADMIXING EXHAUST GAS

翁善勇,周永刚,李士荣,赵虹

DOI: https://doi.org/10.3969/j.issn.1002-3364.2003.11.019

2003-01-01

Abstract:In view of troublesome problems influencing upon the safety of lowgrade bituminous coal firing boilers with hot air for sending pulverized coal and centralized allocatioin of the primary air, such as firecarrying in the primary air jet orifice, and slagging on the waterwall in zone of burners etc., occured after enhancement of volatile and heat value in the coal, a scheme for solving the said problems by admixing exhaust gas has been put forward. The results of design calculation combined with typical boilers, as well as test and study on the admixer of exhaust gas and hot air show that the exhaust gas can be admixed with hot air in a large proportional range, making the implementation of the said scheme to be possible.
Impact of Coal Types and Pulverizing Methods on the Thermal Performance of Blending Coal-Fired Boilers and Their Operational Optimization

Yonggang ZHOU,Huan WANG,Jing WANG,Pei LI,Hong ZHAO

DOI: https://doi.org/10.11930/j.issn.1004-9649.2017.03.077.06

2017-01-01

Abstract:The long-term operation with off-designed coal types brings a power plant significant safe and economic problems on its boiler operation.Aiming at solving the problem,tests are conducted to understand the operational status of the units,to analyze the coal blending problem and to optimize the combustion schemes according to the adaptability of the boiler to different coal types.The test results show that the coal blending should not only simply depend on the calorific value or the volatile contents the unit adaptability to different coal types and the influence of coal type dissimilarity on combustion characteristics should also be considered.In the new coal blending scheme,the anthracite (V~=9.23％) of Pulverizer C in phase I project is swapped with the lean coal of Pulverizer A in phase Ⅱ project,which increases the average volatile contents and reduces the coal type dissimilarity for the phase I project.After the optimization,the vibration of the pulverizer gets better.The average boiler efficiency of the units gets a 0.62 percent improvement and the average coal consumption for power generation gets a 0.65 g/(kW· h) decrease.
Experimental study of sludge disposal in a large coal-fired power plant

LIU Yong-fu,WANG Fei,WU Qi

DOI: https://doi.org/10.3969/j.issn.1004-3950.2013.06.012

2013-01-01

Energy Engineering

Abstract:Based on the sludge drying and incineration project in a 300MW coal-fired power plant boiler,an experimen- tal study of the sludge drying system and the influence of sludge & coal blending was launched. The disc dryer's ther- mal efficiency drawn through the material energy balance,was 74. 96%. And the energy consumption of each part of the drying system was analyzed. By contrast the component characteristics of the sludge & coal blending fuel with the design coal,the influence of the mixed fuel on the pulverized coal boiler was analyzed. The results showed that there was no significant influence on the boiler at the blending ratio less than 3%.
MECHANISM AND EXPERIMENTAL STUDY ON A COAL SMOKELESS COMBUSTION INDUSTRIAL BOILER

孙东红,王擎,崔玉萍,孙键,关键,秦裕琨

DOI: https://doi.org/10.3321/j.issn:0258-8013.2003.06.039

2003-01-01

Abstract:Practical application shows that a coal gasification-smokeless combustion technology can be used to realize the coal combustion with a high efficiency and low pollution in a common used layer coal-fired industrial boilers. The technology consists of a thin coal bed gasification with a lower-speed primary air and a secondary air from a multi-orifices and multi-stages jet stagger-arranged in upper furnace to provide the space combustion. An experiment for comparing such a new fashion combustion with the traditional hand-operated combustion boiler has been made at the same boiler of 0.5 t/h capacity resulting in that the new fashion promotes the thermal efficiency as much as 10%, and the relative inner collection efficiency for solids in furnace reaches 96.9%, and presents a striking contrast with the bellowing smoke status of the hand-fired fashion, and after all, provides a new path to develop the coal-fired industrial boiler design.
Design optimization of wet-FGD system of multiple boilers with one absorber for medium-sized coal-fired boilers

ZHONG Zhencheng,LI Baoyue,WU Zhansong

DOI: https://doi.org/10.3969/j.issn.1002-3364.2013.02.045

2013-01-01

Abstract:According to such problems as corrosion in brick flue duct and dry chimney,the structural strength of original brick flue duct be affected,expensive side-entering agitators,easy blocking of the desulfurizer preparing system and the high-level arrangement of vacuum belt dewatering machines that occurred during the FGD system transformation,the corresponding design optimization were proposed.For example,boosting modification of the induced draft fan,setting wet stack on top of the absorber,separating the absorber and the cyclic oxidation pool,cross-setting the discharge ports of bunker and that of slurry tanks,and conducting liquid-vapor separation with vacuum balance self-draining device.Application results showed that,the optimized system had such advantages as low investment,little maintenance,high reliability and stable operation,so it was suitable for desulfurization transformation for medium-sized power plant.
Design and performance of a circulating fluidized bed boiler firing stone coal

Luo Zhongyang,Li Xuantian,Fang Mengxiang,Luo Chuanqui,Cen Kefa,Ni Mingjiang,Cheng Leming

1995-01-01

Abstract:The design and performance of a demonstrating 35 T/H circulating fluidized bed boiler firing stone coal are reported. The boiler features low recycle rate, unique downward gas exit cyclones in the medium temperature region between the superheater and the economizer to reduce the size of the cyclone separators, and to allow a more compact reversed U general arrangement. Based on computer-aided testing, some different anti-erosion components are employed to maintain acceptable lifetime of the heating surfaces. The boiler demonstrates high combustion efficiency and low emissions with staged combustion.
Integrative flue-gas pollutants removal technology for coal-fired utility boilers

Mingyu YAO,Jianping NIE,Lixin ZHANG,Hongzhi LI

DOI: https://doi.org/10.3969/j.issn.1002-3364.2016.03.008

2016-01-01

Abstract:Against the increasingly serious pollutant emissions from coal-fired utility boilers,this paper puts forward the integrative removing technology for flue gas pollutants emission from coal-fired power plants. In this technology,the removal of each single pollutant depends on the synergistic effect of two or more equipments.Integrative design and layout are necessary for the existing environmental protection equip-ments.The practical engineering application shows that,the synergistic integration of flue gas pollutants removal technology is an effective way to achieve ultra-low flue gas pollutants emission from coal-fired power plants.
Design and Experiment Research of a Novel Pulverized Coal Gasifier Based on Flameless Oxidation Technology

TANG Zhi-guo,MA Pei-yong,LI Yong-Ling,TANG Chao-jun,XING Xian-jun,LIN Qi-zhao

DOI: https://doi.org/10.13334/j.0258-8013.pcsee.2010.08.002

2010-01-01

Abstract:Based on the analysis of realization conditions, formation mechanism and implementation approaches of flameless oxidation technology, a novel dry pulverized coal gasifier which is applicable to double-high coal was put forward. A test system for the pressurized coal gasifier was described, and the study processes and results of the test were given. The feasibility of flameless gasification inside the gasifier was validated from the gasification reaction images, which accord with the characteristic of flameless oxidation. The key gasification parameters were obtained from the measured temperature, the relations of viscosity and components of slag. Moreover, components of syngas and technical indexs were gained on the condition of the key gasification parameters in the gasifier. These results show that high efficiency gasification can be achieved on the gasifier, the desired objectives have been attained, and the experience has been accumulated for the subsequent pilot test. © 2010 Chin. Soc. for Elec. Eng.
97/02089 Design and performance of a circulating fluidized bed boiler firing stone coal

Luo Zhongyang,Li Xuantian,Fang Meng-xiang,Luo Chuanqui,Cen Kefa,Ni Mingjiang,Cheng Leming

DOI: https://doi.org/10.1016/s0140-6701(97)88019-8

1997-01-01

Fuel and Energy Abstracts

Abstract:The design and performance of a demonstrating 35 T/H circulating fluidized bed boiler firing stone coal are reported. The boiler features low recycle rate, unique downward gas exit cyclones in the medium temperature region between the superheater and the economizer to reduce the size of the cyclone separators, and to allow a more compact reversed U general arrangement. Based on computer-aided testing, some different anti-erosion components are employed to maintain acceptable lifetime of the heating surfaces. The boiler demonstrates high combustion efficiency and low emissions with staged combustion.
Development of new technology for coal gasification purification and research on the formation mechanism of pollutants

Shu Zheng,Yixiang Shi,Zhiqi Wang,Pengjie Wang,Gang Liu,Huaichun Zhou

DOI: https://doi.org/10.1007/s40789-021-00420-w

2021-05-07

Abstract:Abstract Coal-fired power generation is the main source of CO 2 emission in China. To solve the problems of declined efficiency and increased costs caused by CO 2 capture in coal-fired power systems, an integrated gasification fuel cell (IGFC) power generation technology was developed. The interaction mechanisms among coal gasification and purification, fuel cell and other components were further studied for IGFCs. Towards the direction of coal gasification and purification, we studied gasification reaction characteristics of ultrafine coal particles, ash melting characteristics and their effects on coal gasification reactions, the formation mechanism of pollutants. We further develop an elevated temperature/pressure swing adsorption rig for simultaneous H 2 S and CO 2 removals. The results show the validity of the Miura-Maki model to describe the gasification of Shenhua bituminous coal with a good fit between the predicted DTG curves and experimental data. The designed 8–6–1 cycle procedure can effectively remove CO 2 and H 2 S simultaneously with removal rate over 99.9%. In addition, transition metal oxides used as mercury removal adsorbents in coal gasified syngas were shown with great potential. The techniques presented in this paper can improve the gasification efficiency and reduce the formation of pollutants in IGFCs.

energy & fuels,mining & mineral processing
Study of the Gasification Characteristics of a New Type Dry Pulverized-coal GFB (Gas Fluidized Bed) Gasifier

唐志国,马培勇,李永玲,林其钊

2010-01-01

Abstract:According to the idea of the flameless oxidation technology, proposed was a new type dry pulverized coal GFB (gas fluidized bed) gasifier. By using the experimental and numerical calculation method, studied was the in-furnace gasification reaction process of the pulverized coal with a high ash melting point. The test and simulation results have verified that the structure of the furnace can result in a uniform temperature field in the furnace, a remarkable drop of the in-furnace temperature gradient, realizing the basic reaction characteristics of the flameless oxidation technology, making the pulverized coal gasification reaction being realized in a space. In the meantime, it can lead to an increase of the in-furnace mean temperature, an enhancement of both the gasification strength and the temperature level at the slag discharging port, thus meeting the requirements for gasification of various coal ranks with a high ash melting point.
EXPERIMENTAL RESEARCH OF DOUBLE-HIGH COAL ON DRY-FEED AIRFLOW GASIFIER

TANG Zhi-Guo,TANG Chao-Jun,XING Xian-Jun,LIN Qi-Zhao

2010-01-01

Journal of Engineering Thermophysics

Abstract:A novel dry-feed pulverized coal gasifier which is applicable to double-high coal was put forward,and gasification experiments in lab-scale gasifier were carried out.The results indicated that the values of[O]/[C]atom ratio and steam/coal ratio should be controlled in the range of 0.95～1.05 and 0.05～0.12 kg/kg respectively in the experimental conditions for better gasification characteristics, and gasification results in representative optimal condition also showed the gasifier could be applied to high efficiency gasification of double-high coal.
PDA research on a novel pulverized coal combustion technology for a large utility boiler

Weidong Fan,Youyi Li,Zhengchun Lin,Mingchuan Zhang

DOI: https://doi.org/10.1016/j.energy.2010.01.033

IF: 9

2010-05-01

Energy

Abstract:In this paper, a new technology for a tangential firing pulverized coal boiler, high efficiency and low NOx combustion technology with multiple air-staged and a large-angle counter flow fuel-rich jet (ACCT for short) is proposed. To verify the characteristics of this technology, experiments of two combustion technologies, ACCT and CFS-1 (Concentric Firing System-1), are carried out under a cold model of a 1025t/h tangential firing boiler with a PDA (particle dynamics anemometer). The distributions of velocity, particle concentration, particle diameters and the particle volume flux of primary air and secondary air are obtained. The results show that the fuel-rich primary air of ACCT can go deeper into the furnace and mix with the main flow better, which means that the counter flow of fuel-rich jets in ACCT can realize stable combustion, low NOx emission and slagging prevention.

energy & fuels,thermodynamics
MODE OF COAL-WATER-SLURRY GASIFIER AND EXPLOITATION OF NEW TYPE GASIFIER

Yu Hailong,Liu Jianzhong,Zhang Guifang,Cen Kefa

DOI: https://doi.org/10.3969/j.issn.1004-4248.2007.01.006

2007-01-01

Abstract:Three dominating gasifiters, Texaco, Dow and multiple-nozzle opposed type gasifiters were introduced and compared in the present paper in the term of the technological process and internal flow field distribution. Relative were analyzed for different type gasifiters and based on which, a new type coal-water-slurry (CWS) gasifiter were designed. The numerical simulation at cold state and the experiment data indicated that the gasifiter have many merits, such as fairly distributed flow field, long retention time of the particle and high content of the effective gas of the raw coal gas at outlet.
EXPERIMENTAL STUDY ON GASIFICATION IN DUAL FLUIDIZED BEDS

LIU Qi,FAN Xiao-Xu,SONG Guo-Liang,NA Yong-Jie,HE Jun

DOI: https://doi.org/10.3321/j.issn:0253-231X.2008.08.046

2008-01-01

Journal of Engineering Thermophysics

Abstract:A test rig of dual fluidized beds with 3 m in height for coal multi-generation was built.A bubbling fluidized bed was for coal gasification and a circulating fluidized bed for char combustion. The two beds are combined with two pneumatic control valves:one valve to send high temperature ash from combustion bed to the gasification bed and another valve to send char and ash from gasification bed to combustion bed.Experiments on Shenhua bituminous,Longkou lignite and Datong bituminous were made,respectively.Carbon conversion efficiency is over 90%.Raising air/coal ratio leads to the increase of temperatures and gasification efficiencies.Tar yield of Shenhua bituminous reaches 1.5%. Longkou lignite has higher gasification efficiency,the calorific value of gas is 10.7 MJ/Nm~3 and the gasification efficiency is 48%.Calculation results show that main part of gas from Longkou lignite is by pyrolysis.
Simulation of Heat and Mass Transfer in Pulverized Coal Boiler Based on Gaseous Combustion Through Phase Separation Technique

Gui-Yang Ma,Guang-Zhong Wan,Yang Li,Hong-Wei Chen,Shan-Shan Zhang

DOI: https://doi.org/10.1115/1.4056383

2022-12-13

Journal of Thermal Science and Engineering Applications

Abstract:Abstract In order to meet the current environmental protection ultra-low pollutant emission requirements, one-step combustion is changed into two-step combustion by split-phase gasification combustion technology, and double-furnace structure, graded air distribution, calcium injection desulfurization, and combined denitrification with selective non-catalytic reduction (SNCR) and selective catalytic reduction (SCR) are adopted to reduce pollutant emissions. ansys was used to establish a two-dimensional steady-state structure model of pulverized coal boiler with a double-furnace. Finite element analysis was carried out on the combustion in 54 MW, 56 MW, and 58 MW working conditions under different calcium-sulfur (Ca/S) ratios. The results showed that the desulfurization efficiency increased gradually when the Ca/S ratio was between 1.0 and 2.6 under the three working conditions. The desulfurization efficiency has no noticeable change when it is between 2.6 and 2.8, and begins to decline when it is greater than 2.8. The optimal calcium-sulfur ratio is obtained when the calcium-sulfur ratio is 2.6, and the SO2 concentration at the outlet of the furnace is reduced to 0.0001 mg/m3. By controlling the highest temperature in the furnace and adjusting the amount of denitrification agent, the nitrogen oxide emission at the outlet of the furnace is reduced to 0.87 mg/m3.

engineering, mechanical,thermodynamics
Novel technology - multi-generation system combined coal gasification and combustion process

Kefa Cen,Mengxiang Fang,Zh Luo,Xiaomin Li,Ch Yu,Mingjiang Ni

1997-01-01

Abstract:For clean and high efficient utilization of coal, a new system has been developed at the Institute for Thermal Power Engineering, Zhejiang University. The coal is first gasified, the fuel gas produced is used for industrial process, town gas or fuel for gas turbine. The residue char from gasifier is burned in a circulating fluidized bed combustor to generate steam for a number of purposes including power generation, process heating, refrigeration, and air conditioning. The ash is used to produce construction materials. Metals, such as vanadium and uranium, can be extracted if the content of the metal in coal is high. The very important part of the system is the combined sub-system of gasifier and combustor. A series of fundamental experiments have been finished. The results show that the system can produce gas and steam simultaneously and the gas heating value is 10000-14000 Kj/Nm3, and the fuel conversion is over 90%. Furthermore, the system has the advantages of low emission, low investment and high economical efficiency. A demonstration system has been constructed at Yangzhong Thermal Power Plant in Jiangshu Province. It can produce 3500Nm3/H dry gas and 75T/H steam. The CFB Boiler has already entered commercial operation since April, 1995. The operation results show it has high efficiency, good fuel adaptability, and high load turndown ratio.
Optimization to Power Boiler Furnace Performance Design Method

李永星,陈听宽,杨冬

DOI: https://doi.org/10.3321/j.issn:0253-987X.2003.07.004

2003-01-01

Abstract:A design method of power boiler furnace performance is developed. The method is based on the statistic data analysis, the parametric analysis and the data regress for a large number of operation parameters from 36 well-run coal-fired power boilers in China. The relations among furnace cross-section heat flux, the boiler maximum continuous rating and the comprehensive judging index of coal property and the relations among furnace burner zones heat flux, the fuel volatile matter of dry ash-free basis and the judging index of coal caking property are constructed. The practical application cases show that the method improves the performance design precision of boilers and optimizes the boiler design method currently used in China.

Design of the Integrative Boiler of Coal Gasification and Combustion with Double Furnace and Fixed Grate

Design of the Integrative Boiler of Coal Gasification and Combustion with Traveling Grate

Examination of Industrial Demonstration Unit of Coal Gasification for Pulverized Coal with Ash Agglomeration Technique

STUDY ON ELIMINATING FIRE-CARRYING IN PRIMARY AIR JET ORIFICE BY ADMIXING EXHAUST GAS

Impact of Coal Types and Pulverizing Methods on the Thermal Performance of Blending Coal-Fired Boilers and Their Operational Optimization

Experimental study of sludge disposal in a large coal-fired power plant

MECHANISM AND EXPERIMENTAL STUDY ON A COAL SMOKELESS COMBUSTION INDUSTRIAL BOILER

Design optimization of wet-FGD system of multiple boilers with one absorber for medium-sized coal-fired boilers

Design and performance of a circulating fluidized bed boiler firing stone coal

Integrative flue-gas pollutants removal technology for coal-fired utility boilers

Design and Experiment Research of a Novel Pulverized Coal Gasifier Based on Flameless Oxidation Technology

97/02089 Design and performance of a circulating fluidized bed boiler firing stone coal

Development of new technology for coal gasification purification and research on the formation mechanism of pollutants

Study of the Gasification Characteristics of a New Type Dry Pulverized-coal GFB (Gas Fluidized Bed) Gasifier

EXPERIMENTAL RESEARCH OF DOUBLE-HIGH COAL ON DRY-FEED AIRFLOW GASIFIER

PDA research on a novel pulverized coal combustion technology for a large utility boiler

MODE OF COAL-WATER-SLURRY GASIFIER AND EXPLOITATION OF NEW TYPE GASIFIER

EXPERIMENTAL STUDY ON GASIFICATION IN DUAL FLUIDIZED BEDS

Simulation of Heat and Mass Transfer in Pulverized Coal Boiler Based on Gaseous Combustion Through Phase Separation Technique

Novel technology - multi-generation system combined coal gasification and combustion process

Optimization to Power Boiler Furnace Performance Design Method