Abstract:DC superconducting induction heating method can be much more efficient in metal preheating process when billets are made of low-resistivity and non-magnetic materials as compared with the traditional AC induction heating techniques. In a high temperature superconducting ( HTS) induction heating system, the stability of the HTS magnet is crucial to ensure its safe operation. In this paper, a HTS YBCO magnet has been tested under con-duction-cooled circumstances. It is chosen as a stability criterion that whether the temperature rises can tend to be steady within the safety margin. The temperature distributions were evaluated by sensors located at different posi-tions of the magnet. Furthermore, the effects of different current ramp rates on temperature rises were investigated. It is found that for the safe operating current of a conduction-cooled YBCO magnet, the safety factor value usually smaller than that of an immersion cooled HTS magnet. For the operating magnet in this paper, the safety factor can be chosen as 0. 65 . Because the remote terminal of a conduction-cooled magnet has poor ability of heat transmis-sion, it can be helpful to cover the shortage of uneven cooling by adding cooling points and improving heat transfer methods. It is also presented that different current ramp rates have little influence on the final temperature rises within the given range in which the magnet can operate stably. The tested and analyzed results in this paper are of great significance for studies on thermal stability analysis and safe operation of large-scale HTS magnets.

Design, Fabrication and Testing of a Heater-Trigged High-Tc Superconducting Power Supply

Design and Test Performance of 2g Pancake Coils for Hts Dc Induction Heater Prototype

Development of a Conduction-Cooled HTS SMES

Design and Test of HTS Power Converting System with Multiple Magnets Considering Various Sequential Controls of Heater-Triggered Switches

Design and Operating Characteristics Analysis of HTS Magnets for Dipole-Type DC Induction Heating

Design And Fabrication Of A Conduction-Cooled High Temperature Superconducting Magnet For 10 Kj Superconducting Magnetic Energy Storage System

Test and Analysis of Electromagnetic and Mechanical Properties of HTS Coil During Quench State

Development of Testing Device for Critical Current Measurements for HTS/LTS

A Novel Heater-Triggered HTS Semi-Persistent Current Switch with High Switching-off Resistance

Design Study on a 100-Ka/20-k HTS Cable for Fusion Magnets

Design and Key Performance of 2G HTS Coils for High Speed Superconducting Maglev Application

Electromagnetic Design of HTS D-shaped Coils for a Toroidal-type Superconducting Magnet

Design for In-Field Critical Current Measurement System With 102 Mm 15 T Background Magnet

Experimental Research of a 10 Ka HTS Current Lead Using YBCO Tapes

Magnetic Conduction Structure Design and Charging Test of a Linear-Motor Type Flux Pump for Through-Dewar Excitation of High Temperature Superconducting Motors

Experimental research on thermal stability of conduction-cooled YBCO magnet for induction heating

A customized electric heater to mitigate screening current by optimal control on temperature distribution in a high-temperature superconductor coil

Design of Superconducting Magnet for Background Magnetic Field

Analysis of the Operational Characteristics of Discrete-Sheet Type Low-Tc Superconducting Power Supply

Optimization of heating profile for superconductor joint performance made by resistive joule heating process

Preliminary Design Study on Non-Twisted HTS Conductor for Fusion Applications