Abstract:Microwave absorption properties of thin composites containing frequency selective surfaces(FSS)embedded in magnetic absorbing material(MAM)are presented in this paper.The FSS is composed of a regular array of square loop elements and a low-loss dielectric flat as the substrate.The top and bottom magnetic absorbing materials are carbonyl iron composites with different electromagnetic parameters.It is difficult to obtain good microwave absorp-tion properties only using the conventional magnetic absorber without FSS embedded in a broadband frequency range.The thickness of the magnetic absorber will be too large,and subsequently the surface density of the absorber will be greatly increased,which will limit its application regions.Introducing FSS can enhance the microwave absorp-tion ability of magnetic composites,especially in the low frequency range,and hence broaden the absorption band as well as effectively reduce the thickness of the absorber.Under the condition of surface impedance matching,the ohmic dissipation originating from metal elements of FSS and the magnetic loss originating from the bottom layer are the main mechanism to absorb electromagnetic energy.In order to investigate the microwave absorption proper-ties of the composite structure,we built the model using the electromagnetic simulation software HFSS 15.0,and then continuously optimized the structural parameters based on the simulation results.The final simulation results show that the composite microwave absorber with the thickness of 2 mm has an operating bandwidth with the reflec-tivity below -10 dB in the frequency range of 3.4 G~9 GHz and -8 dB in the frequency range of 9 G~18 GHz. The absorber obtains -5.5 dB reflectivity at 2 GHz.Compared with the absorber without FSS inserted under the same condition,though the higher peak absorption could be achieved using the absorber without FSS,the microwave absorption properties become worse and worse,and hardly meet the requirement of broadband absorption.The composite microwave absorber with FSS inserted,which has a broad absorption band and excellent low-frequency absorption characteristics,has a wide application prospect.

Absorption enhancement of fractal frequency selective surface absorbers by using microwave absorbing material based substrates

A Composite Absorber of FSS and Area-coated Honeycomb Using High-loss Materials for Broadband Applications

Study on the Electromagnetic Properties of Frequency Selective Surface Absorber

Research on thin and broadband magnetic absorbing materials with embedded frequency selective surfaces

Optimize the dielectric slab of the tunable active frequency selective surface absorbing material

Design and Measurement of Microwave Absorbers Comprising Resistive Frequency Selective Surfaces

One-step fabrication of a novel fiber-based absorber for flexible, tunable and boosted microwave absorption

A THIN AND BROADBAND MICROWAVE ABSORBER BASED ON MAGNETIC SHEETS AND RESISTIVE FSS

A Tuneable Microwave Absorber Using AFSS

Broadband Microwave Absorption Properties of Ultrathin Composites Containing Edge-Split Square-Loop FSS Embedded in Magnetic Sheets

A Thin and Broadband Tunable Radar Absorber Using Active Frequency Selective Surface

Surface Impedance Modulation of FSS Composite Absorber for RCS Reduction at Normal and Grazing Incidence

An Ultra-Thin Broadband Active Frequency Selective Surface Absorber For Ultrahigh-Frequency Applications

Broadband Microwave Absorption Properties of a Frequency-Selective Surface Embedded in a Patterned Honeycomb Absorber

Thin and Broadband Electromagnetic Absorber Design Using Resistors and Capacitors Loaded Frequency Selective Surface

Flexible Design and Realization of Wideband Microwave Absorber with Double-Layered Resistor Loaded FSS

Novel Absorber Based on Pixelated Frequency Selective Surface Using Estimation of Distribution Algorithm

Design of a Wideband Absorption Frequency Selective Rasorber Based on Double Lossy Layers

An Ultra-Wideband Metamaterial Absorber With Active Frequency Selective Surface

Design of a Dual-Band Electromagnetic Absorber with Frequency Selective Surfaces

Multi-material fused deposition modelling of structural–functional integrated absorber with multi-scale structure possessing tunable broadband microwave absorption