Abstract:Utilizing carbon nanotubes (CNTs) as substitutes for the conventional rigid indium-tin oxide (ITO) electrodes, all CNT based flexible field emission devices (FEDs) were possible to prepare with a novel film transfer method. In the method, both CNT-based flexible cathode and anode were fabricated by first attaching the vacuum filtered CNT film/mixed cellulose eater (MCE) filter membrane to an adhesive semi-cured poly(dimethyl siloxane) substrate, and then peeling off the MCE filter membrane. Effects of bending direction and bending radius on field emission properties were studied. The field emission performance of the convex bending device was worse than that of the flat device and deteriorated further with the decrease of bending radius. In contrast, the concave bending device exhibited better field emission properties than the flat device; nevertheless, its field emission properties decreased as the concave bending radius reduced below a certain value. The method achieved two successes. One is that the interfacial interaction between CNT films and the flexible substrate was greatly enhanced. The other is that the transfer process improved the field emission properties due to the increase of vertically aligned CNT tips. Compared with traditional methods applied in FED preparation, the novel modified transfer method is organic free, easy to control, cheap, and environment friendly.

Fabrication Technology of New Type Cathode in CNT-FEDs

All carbon nanotube based flexible field emission devices prepared through a film transfer method

Fabrication and Characterization of Gated Carbon Nanotube Emitters in A Trench Structure

The Fabrication and Operation of Fully Printed Carbon Nanotube Field Emission Displays

Research on key techniques of carbon nanotube field emission display

Development of Carbon Nanotube/Nanofiber Field Emission Display

Fabrication of carbon nanotube and carbon nanofiber field emission cathode by composite electrodeposition

Synthesis and Field Emission Properties of Carbon Nanotubes Cold Cathode Materials

Carbon Nanotube Field Emission Displays and Their Fully Printing Fabrication Techniques

Achieving Uniform Field Emission from Carbon Nanotube Composite Cold Cathode with Different Carbon Nanotube Contents: Effects of Conductance and Plasma Treatment

Mechanical Fabrication of Carbon Nanotube Films and Their Field-Emission Properties

P2&#x2013;5: Fabrication and Characterization of 4.3-Inch Carbon Nanotube Cold Cathodes for Field Emission Flat Panel Light Source

Low Temperature Growth of Carbon Nanotube on Glass Substrate and Its Application in Field Emission Display

Fabrication Of Field Emission Cathode By Spraying Multiwalled Carbon Nanotubes On Screen Printed Substrate

A novel triode-type carbon nanotube field emission micro-cathode fabricated by using electrochemical and micromachining

Optimization of Field Emission Properties of Carbon Nanotubes Cathodes by Electrophoretic Deposition

SURFACE MODIFICATION OF PRINTED CARBON NANOTUBES AND ITS APPLICATION OF FIELD EMISSION

Field Emission Property of CNT Cold Cathode with DLC Film Deposition Treatment

Improvement of the Field Emission from Screen Printed Carbon Nanotube Cold Cathode by Applying Electrical Field

Various Nanostuctured Carbon Films For Fed Applications

Carbon Nanotube Displays