Abstract:Military aircraft are subjected to variable loads, which are the main cause of initiation and propagation of cracks in the most stressed locations of the airframe. The aim of a Full-Scale Fatigue Test (FSFT) is to represent actual load conditions in such a way that the results obtained are a good representation of the actual loads and may be used as data that give insight into the development of real fatigue damage in critical locations. The FSFT load spectrum is a generalized depiction of the expected service loads and is designed to give an overall good representation of loads exerted on the airframe's structural elements during operation. Moreover, the discrete method of load application on the structure (exerting loads with hydraulic actuators rather than pressure fields or inertia loads expected in actual operation) may cause some local effects, which may not be present in operation. The proposed usage of direct strain data from the test include such local effects. Moreover, operational loads may vary between individual aircraft, therefore it is crucial to understand the whole process of fatigue crack onset and development in order to determine safe inspection intervals and thereby mitigate risk. This paper presents crack propagation calculations regarding the development of a crack in a critical location of the PZL-130 "Orlik" TC-II aircraft, discovered during FSFT. The discussed crack was found already developed, hence the information about nucleation and initial propagation of the crack was not available. Therefore, there was a need to recreate the whole propagation process by means of numerical estimations using the FSFT results like location of the crack and total life for model validation. Moreover, in order to gather real load data for calculations a dedicated stain gage was installed on the damaged load path to monitor the actual remote strain in the element during the FSFT. This allowed for the definition of load sequence exerted on the damaged element directly during the test rather than estimating it from the general load conditions of the wing. The calculations allowed for the estimation of crack propagation curves from initiation to critical crack length causing fatal damage. The obtained curves allowed to visualize the crack behavior due to applied load and furthermore define initial and recurring inspection intervals for the entire fleet during operation, which allowed to define which cracks could be found before they reach critical size in order to carry out mitigation actions like repair or replacement of the damaged part. The authors present the methodology for load spectrum development based on direct strain measurements and furthermore crack propagation curves estimation, validated with the actual FSFT results, which allowed to propose nondestructive inspection intervals for future operation.

Fatigue test of structural part of airfoil

Fatigue Fracture Surface Analysis and Fatigue Life Estimation of Corroded Steel Wires

Depth-sensing Indentation Measurement and Finite Element Analysis of Residual Stress Field Near Fatigue Crack Tip

Fatigue Crack Propagation Analysis in an Aero-Engine Turbine Disc Using Computational Methods and Spin Test

Fatigue Testing in Welded Joint of 980- grade Steels

Component Structural Equivalent Research Based on Different Failure Strength Criterions and the Theory of Critical Distance

Damage-Accumulation-Induced Crack Propagation and Fatigue Life Analysis of a Porous LY12 Aluminum Alloy Plate

Total Fatigue Life Estimation of Aircraft Structural Components Under General Load Spectra

Fatigue Crack Propagation Life Prediction of GH4169 Under Biaxial Load Based on Cruciform Specimen

Fatigue Crack Propagation Estimation Based on Direct Strain Measurement during a Full-Scale Fatigue Test

Fatigue-driven failure criterion for progressive damage modelling and fatigue life prediction of composite structures

Multiaxial high-cycle fatigue failure and life prediction based on critical plane method

High-cycle and very-high-cycle fatigue behavior of a stainless steel for air-conditioning compressor valve plates

Fatigue life analysis of a composite materials structure using allowable strain criteria

Detail Stress Analysis and Fatigue Crack Initiation Life Prediction of Riveted Joint

Fatigue life evaluation of notched components affected by multiple factors

Notch Fatigue Life Prediction Considering Nonproportionality of Local Loading Path under Multiaxial Cyclic Loading

Comparison of structural response and fatigue endurance of aircraft flap-like box structures subjected to acoustic loading

Fatigue Crack Growth Behavior and Failure Mechanism of Nickel-Based Alloy GH4169 under Biaxial Load Based on Fatigue Test of Cruciform Specimen

Fatigue life assessment method of in-service mechanical structure