Abstract:The reasonable design of biomimetic non-smooth surfaces is a novel and effective way to solve problems such as the poor lubricity and serious friction and wear of friction pairs of seawater axial piston pumps. Inspired by cross-scale, second-order compound microstructures on the surfaces of some living organisms, a hydrodynamic lubrication model of a slipper pair with a surface featuring spherical pits containing spherical convex hulls was built. This study analyzed the bearing lubrication mechanism and friction characteristics of cross-scale, second-order compound microstructure from the microflow perspective via the CFD method and optimized the working and geometric parameters using a hybrid orthogonal test scheme. The study's results show that the cross-scale, second-order compound microstructure can produce a superimposed hydrodynamic pressure effect to improve the bearing capacity of the lubrication film of a slipper pair, reducing the friction coefficient. The orders of factors (the working parameter and geometric parameters) under multiple indices (the total pressure-bearing capacity and the friction coefficient) were found. The optimal combination is a spherical pit with a first order diameter of 0.7 mm, a first order depth-to-diameter ratio of 0.1, an area rate of 20%, an arrangement angle of α/3 and a spherical convex hull with a second order diameter of 0.13 mm, and a second order depth-to-diameter ratio of 0.3. Compared to a smooth surface and a first-order, non-smooth microstructure, the cross-scale, second-order compound microstructure has an 11.0% and 8.9% higher total pressure-bearing capacity, respectively, and the friction coefficient decreased by 9.5% and 5.4%, respectively.

Boundary Slip Design of High Speed Water Lubricated Slider Bearing

Multi-objective Optimization Design of Sliding Bearing of High-speed Centrifugal Pump Based on Lubrication Characteristics Analysis

Effects of Lubricant Viscosity-Temperature Relationship on the Capacity of Sliding Bearing

Optimization Design Of The Inner Radius Of The Sealing Surface Of Slipper

Optimization design for slip/no-slip configuration of hydrophobic sliding bearings using Monte Carlo search

Investigation on Structural Optimization of Anti-Overturning Slipper of Axial Piston Pump

Investigation of Slip/no-Slip Surface for Two-Dimensional Large Tilting Pad Thrust Bearing

Simulation and Experimental on Thermal Behavior of Hydrostatic Thrust Bearing Based on Superhydrophobic/oleophobic Surface

Experimental Study of the Interfacial Slip on Hydrodynamic Lubrication Under Different Wettabilities

Research the lubrication characteristics on the modified main thrust roller of the slewing bearings

Optimization transient wear and contact performances of water-lubricated bearings under fluid-solid-thermal coupling condition using profile modification

A Study Of The Film Formation For A Rough Slider Bearing

Author Response for "A New Modified Boundary Slip Model for Thrust Bearing Performance under Fluid–thermal–structure Interaction Regime"

Simulation Study on Bearing Lubrication Mechanism and Friction Characteristics of the Biomimetic Non-Smooth Surface of a Cross-Scale, Second-Order Compound Microstructure

Effects of wall slip on the dynamic characteristics of water-lubricated bearing considering rough contact

Double Oil Grooved Round Sliding Bearing Performance Analysis with Disturbance

Sliding behavior of high speed ball bearings based on improved nonlinear dynamic model

Effect of the groove parameters on the lubricating performance of the water-lubricated bearing under low speed

Theoretical and experimental study on influences of surface texture on lubrication performance of a novel bearing

Combined Effect of Boundary Layer Formation and Surface Smoothing on Friction and Wear Rate of Lubricated Point Contacts During Normal Running-in Processes

A novel approach to investigate temperature field evolution of water lubricated stern bearings (WLSBs) under hydrodynamic lubrication