Abstract:Bi0.5Na0.5TiO3 (BNT)-based complexes, one of the most promising piezoelectric materials, have been recently raised as potential ionic conductors. Although the property modification of BNT-based materials was studied intensively, the influence of the preparation process on the structure and conduction mechanism has not received the attention it deserves since its particular sensitivity to the conductive performance. Herein, (Bi0.44Nd0.01Sr0.02Ca0.02)Na0.5TiO2.965 (BNSCNT) ceramics were prepared by tape-casting (TC) and conventional solid-state reaction (SR) method, respectively. Despite the pure perovskite phase with rhombohedral distortion of BNSCNT ceramics prepared by SR, the rutile titanium dioxide phase can be identified for TC. The ac impedance spectra reveal a discernible bulk response with appreciable oxide ion conductive capacity in SR, while the contribution from each physical origin becomes obscure due to the superposition in the Nyquist plots of TC. Combined with the activation energy deduced from the thermally dependent conductivity, which is significantly less than the dielectric BNTs, the dominated ionic conductive nature with non-negligible electron contribution is proposed. The grain boundary and electrodes/interfaces response, and their conduction mechanism in the intermediate frequencies range are disclosed by employing the dc bias field and atmospheres. The field-induced inverse variation is recognized of which the dissociation of defect clusters is responsible for SR, whereas the trapping of conduction electrons on the sample surface and the second phase will play the key role for TC, in determining their impedance. This work raises the great importance of the preparation route on the structure and conduction mechanisms of BNT-based oxide ionic conductive materials.

Tape Casting of Ba0.7sr0.3tio3 for Tunable Microwave Devices

Tape casting of Ba0.7Sr0.3TiO3 for tunable microwave devices

Tape Casting of Ba<sub>0.7</sub>Sr<sub>0.3</sub>TiO<sub>3</sub> for Tunable Microwave Devices

Preparation and microwave dielectric properties of multilayer Li 1.075 Nb 0.625 Ti 0.45 O 3 co-fired ceramics with aqueous tape casting

Aqueous tape casting of the 0.7Pb(Mg1/3Nb2/3)O3-0.3PbTiO3 ceramic films: Production optimization and properties

Electrophoretic Deposition Ba0.65Sr0.35TiO3 Thick Films for Tunable Microwave Devices

The Study of the Tape Casting Processing's Influence on the Templates

Aqueous Tape Casting of Li1.075Nb0.625Ti0.45O3 Microwave Ceramic Sheets

Aqueous tape casting of Li1.075Nb1.625Ti0.45O3 using PVA/PVAc co-binder

Effect of B2O3 on the Aqueous Tape Casting and Microwave Properties of Li2O–Nb2O5–TiO2 Ceramics

Colloidal processing and characterization of TiO 2 –MnO‐doped alumina/alumina slurries and tapes

High-Performance BaTiO3 Film Based on Aqueous Tape Casting for Ultrathin MLCC Applications

Influence Of Solids Loading On Water-Based Tape Casting Of Li1.075nb0.625ti0.45o3 Ceramic For Ltcc Application

Fabrication and characterization of Li1+x-yNb1-x-3yTix+4yO3 substrates using aqueous tape casting process

PREPARING OF SrBi_4Ti_4O_(15) PIEZOELECTRIC CERAMICS BY TAPE CASTING

Effect of Tape Casting Procedure on Structure and Microwave Characteristics of Tapes

Effect of V2O5 on the Aqueous Tape Casting of Li1.075Nb0.625Ti0.45O3 Microwave Ceramic

Structure, impedance and conduction mechanisms of tape-casting (Bi0.44Nd0.01Sr0.02Ca0.02)Na0.5TiO2.965 ceramic film

Boron Carbide Non Aqueous Tape Casting Process

Processing and Properties of Ba0.5sr0.5tio3/Bi1.5zn1.0nb1.5o7/Ba0.5sr0.5tio3 Sandwich Thin Films for Tunable Microwave Devices

Enhanced Microwave Dielectric Properties of Ba0.4sr0.6tio3 Ceramics Doping by Metal Fe Powders