Abstract:Lithium niobate (LiNbO3) nanostructure thin film was prepared and deposited on the substrates made of quartz by utilizing pulse laser deposition (PLD) technique. The effect of substrate temperature changing on the optical and structural properties of LiNbO3 films was investigated and studied. The chemical mixture was prepared by mixing the raw material (Li2CO3, Nb2O5) with Ethanol liquid without any further purification, at the stirrer time 3hrs without heating, then the formed material was overexposed to annealing process at 1000°C for 4hrs. LiNbO3 nanostructure thin film was characterized and analyzed by utilizing the Ultra-Violet visible (UV-vis) and X-Ray Diffraction (XRD). The UV-vis results showed that the increase in the substrate temperature to 300°C leads to decrease in the values of transmission (T%), absorption (A) and optical energy gap (Eg) and increase in the values of reflection (R%) and refractive index (n). While, the XRD results explained that the LiNbO3 structure became more pure and crystalline with increase the substrate temperature, because the intensity of the phase 2θ at the value of 34.8°, 40.06° and 48.48° correspond to (110), (113) and (024) planes disappeared at the substrate temperature 300°C. So, all presented results give a good indication to use LiNbO3 nanostructure thin film prepared at the substrate temperature 300°C for manufacturing the optical waveguide to give the best results.

Surface modification investigation of lithium niobate single crystal fiber

Lithium niobate single crystal fiber with parabolic refractive index cladding

Mg-Ion Indiffusion of Lithium-Niobate Single-Crystal Fiber

Magnesium-Ion Indiffusion to Lithium Niobate Single-Crystal Fiber with Mgf2 As Diffusion Source

Cladding and Characteristics of Linbo3 Single Crystal Fibre

Realization of lithium niobate single crystal fiber cladding and its optical characteristics

A-Axis Nd:MgO:LiNbO3single Crystal Fibers with Magnesium-Ion Indiffused Cladding

Cladded Optical Fiber Laser Made From A-Axis Nd : Mgo : Linbo3 Single Crystal Fiber With Mg-Ion Indiffusion

Lithium–Niobate Channel Waveguide for the Realization of Long-Period Gratings

Optical and Thermal Properties of 2-inch Nd3+, Mg2+ Co-doped Near Stoichiometric Lithium Niobate Crystal

Thinning of Lithium Niobate Wafers with a Novel Designed Lapping Tool and Measurements

Pulsed laser deposition of c-orientedLiNbO3LiTaO3 optical waveguiding bilayered films on silicon wafers

Second-Harmonic Generation Using an A Axis Nd : Mgo : Linbo3 Single Crystal Fiber with Mg-Ion Indiffused Cladding

Pulsed Laser Deposition of Optical Waveguiding LiNbO 3 Films on SiO 2 Substrate

In-situ Poling of Lithium Niobate Films on Silicon Wafer by Applying a Low Electric Field During Pulsed Laser Deposition

Isotropic atomic layer etching of MgO-doped lithium niobate using sequential exposures of H$_2$ and SF$_6$ plasmas

Investigation of etching two-dimensional microhole lattice array on lithium niobate with focused ion beam for fabricating photonic crystals

LiNbO3 Crystals: from Bulk to Film

A NEW CRYSTAL GROWTH METHOD FOR THE GROWTH OF NEAR-STOICHIOMETRIC LiNbO3

GROWTH AND CHARACTERISTICS OF MAGNESIUM-DOPED NEAR-STOICHIOMETRIC LITHIUM NIOBATE CRYSTAL

Optical and Structural investigations of LiNbO3 thin films by PLD