Abstract:The hydration heat generated during the concreting of cast-in-place piles causes thermal disturbance to the surrounding permafrost, leading to its thawing. This further affects the stability of the pile foundation and degrades the construction progress. To explore the influence mechanisms of the concrete hydration heat on the permafrost temperature field around the pile, as well as that of different construction seasons on the pile-side boundary conditions and permafrost temperature field, monitoring results of on-site tests and numerical simulation were used to analyze the distribution law of the pile soil temperature field in space and time, and the pile-side boundary conditions and permafrost temperature field during construction seasons. The results show that the temperature trend of the pile foundation can be divided into three stages: a rapid rise phase (0∼2 d), a rapid decline phase (2∼10 d), and a slow decline and stabilization phase (10∼90 d). As the radial distance from the pile center decreases, there occur a corresponding acceleration in temperature increase and an elevated maximum temperature rise (MTR). The influence range of the molding temperature and the hydration heat is about 1∼2 times the pile diameter and less than 1.5 m in the depth direction. Compared to the atmospheric temperature, there is a lag in the change in the permafrost temperature caused by accumulation of ground temperature, and the significant difference between the two leads to an increased rate of heat exchange at the boundary condition. Conducting drilling operation and cast-in-place pile construction in the cold seasons is conducive to reducing the thermal disturbance to the permafrost around the pile in permafrost areas.

Simulation Analysis of Temperature Control of Pier Pile Cap in Construction Period

Study on Temperature-Stress Simulation of RCC Dam During Construction Period

Finite element analysis of temperature effect and crack-control measures for ultra-long concrete structures

Finite element simulation and analysis of hydration heat in large-volume pile caps

Simulation and analysis of temperature field during concrete pouring in an arched structure

FINITE ELEMENT ANALYSIS OF HYDRATION HEAT TEMPERATURE FIELD IN CONCRETE FOUNDATION OF TONGBAI POWER STATION

TEMPERATURE FIELD ANALYSIS IN MASSIVE CONCRETE CONSTRUCTED LAYER BY LAYER

FEM Analysis and Simplified Approach for a Single Energy Pile Subjected to Thermomechanical Loads

Thermal Analysis of Mass Concrete Embedded with Double-Layer Staggered Heterogeneous Cooling Water Pipes

Simulation of the Temperature Field in Mass Concrete with Double Layers of Cooling Pipes During Construction

Analysis of temperature control for mass concrete bearing platform with water pipe cooling considered

Measurement and control of temperature in mass concrete construction of pile caps of Hutiaohe Bridge

Numerical Analysis of Concrete Hydration Heat Impact on Frozen Soil Temperature around Cast-in-Place Piles

On temperature control measures of large volume concrete slab

The Study of Factors on the Heat Transfer Characteristics of Interface between Cast-in-Place Concrete and Frozen Soil

Simulation Analysis of Large Volume Hydration Heat Effect of Anchor Foundation for Suspension Bridge

Numerical simulation of the freezing process of concrete

Bearing characteristic of static drill rooted pile considering condition of energy carrier

Mass Concrete Placement Block Temperature and Stress Field Simulation of the Direct Coupling Method

Numerical Simulation of Hydrated Heat Temperature Field of Massive Concrete

The Application Study of Low- Heat Portland Cement in Gate Pier Concrete