Abstract:Effect of mold on upper and lower surfaces of composite shell under different fiber volume fraction. In the process of preparing textile composites by resin transfer molding (RTM) method, both the upper and lower surface of the mold will interact with the composite parts due to the mismatch of thermal expansion coefficient between the mold and the part, resulting in warpage deformation. To address this key technical problem, this article first studied the effect of mold on the warpage deformation of composite material under different fiber volume fractions. Then a mold–part interaction modeling method for RTM process with nonthermoelastic deformation is proposed. By introducing shear layers between the upper and lower surfaces of the mold and the composite part, a finite element simulation model for predicting the curing deformation of the component is established and experimentally verified. The results show that the effect of mold–part interaction on the warpage deformation of the composite decreases with increasing fiber volume fraction. Meanwhile, the proposed modeling method can avoid complete material characterization, and the comparison between experimental and simulation results proves that the model can accurately simulate the curing deformation of composite components under the same process conditions. Finally, the analysis reveals that the interaction caused by thermal mismatch between the composites and the mold is less related to the intermediate layup, but mainly related to the fiber orientation of the layup layer in contact with the mold. Highlights The warpage deformation law of the mold on the composites with different fiber volume fractions is investigated. A mold–part interaction modeling method for a resin transfer molding process with nonthermoelastic deformation is proposed, where the mold stretching effect is represented by the cumulative effect of the interaction between the two layers on the upper and lower surfaces of the part.

Mold Development for Resin Transfer Molding with Dimension Variation and Deformation Compensation

Reverse Deformation Design for Bending Control in Welding of Ring Stiffeners

Study on Milling Deformation of Aerospace Frame Monolithic Components

Effect of mold on curing deformation of resin transfer molding‐made textile composites

An approach to couple mold design and on-line control to manufacture complex composite parts by resin transfer molding

Design Optimization of Molds for Autoclave Process of Composite Manufacturing

Research on the Application of Injection Molding Simulation Technology in Mold Design

Performance of additively manufactured composite mold with uniform fiber orientation

Influence of mold design and injection parameters on warpage deformation of thin-walled plastic parts

Enhancing the Forming Accuracy of CFRP through a Global Compensation Method by Introducing an Optimal Profile

Development of Replica Molding Processes for Hypervariable Microstructural Components

Controllable deformation design for 4D-printed active composite structure: Optimization, simulation, and experimental verification

Mold modification methods to fix warpage problems for plastic molding products

Application of New Conformal Cooling Layouts to the Green Injection Molding of Complex Slender Polymeric Parts with High Dimensional Specifications

A Study on Process-Induced Warpage of Curing Mold of Composite Structures

Evaluating the Cooling Efficiency of Polymer Injection Molds by Computer Simulation Using Conformal Channels

Application of CAE for mold flow analysis in plastic molding mold design

Simulating the resin flow and stress distributions on mold tools during compression resin transfer molding

Realization of DFM in Mold Design & Manufacturing

Non-isothermal simulation on injection/mold temperatures in liquid composite molding process