Abstract:Fluoroalkyl end-capped vinyltrimethoxysilane oligomer [RF-(CH2CHSi(OMe)3)n-RF; n = 2, 3; RF = CF(CF3)OC3F7] undergoes sol–gel reactions in the presence of hexagonal boron nitride (h-BN) nanoparticles under alkaline or acidic conditions at room temperature to afford the corresponding fluorinated oligomeric silica/h-BN nanocomposites in good isolated yields (~ 80%), respectively. The fluorinated oligomeric silica/h-BN nanocomposites thus obtained were found to exhibit a good dispersibility toward the traditional organic media including water. These two kinds of fluorinated nanocomposites were applied to the surface modification of poly(methyl methacrylate) (PMMA). The fluorinated nanocomposites prepared under alkaline conditions can give not only a good oleophobic characteristic imparted by longer fluoroalkyl groups in the composites but also the higher fluorescent emission related to the presence of h-BN on the only surface side of the modified PMMA film. In contrast, the fluorinated nanocomposites prepared under acidic conditions can provide a good oleophobic characteristic and a higher fluorescent emission on both the surface and even on the reverse side of the PMMA film. Such unique controlled surface modification ability will be discussed by 29Si solid-state NMR spectra of these two types of the nanocomposites.<h3 class="Heading">Graphic abstract</h3>Surface arrangement of the RF-(VM-SiO2)n-RF/h-BN nanocomposites, which were prepared under alkaline or acidic conditions, toward the PMMA film <a href="https://media.springernature.com/original/springer-static/image/art%3A10.1007%2Fs11998-019-00261-y/MediaObjects/11998_2019_261_Figa_HTML.png">Open image in new window</a> .

Poly(methylmethacrylate)-silica nanocomposites films from surface-functionalized silica nanoparticles

Preparation and Dielectric Properties of Polyimide/silica Nanocomposite Films Prepared from Sol–gel and Blending Process

Poly(L-Lactic Acid)/Sio2 Nanocomposites Via in Situ Melt Polycondensation of L-Lactic Acid in the Presence of Acidic Silica Sol: Preparation and Characterization

Thermal Degradation and Flammability of Nanocomposites Composed of Silica Cross-Linked to Poly(Methyl Methacrylate)

PREPARATION AND STUDY ON STRUCTURE OF THE POLYIMIDE/SILICA HYBRID AND NANOCOMPOSITE FILMS

Preparation and thermal properties of epoxy-silica nanocomposites from nanoscale colloidal silica

Isothermal crystallization of polypropylene/surface modified silica nanocomposites

On The Silica/Pmma Nanocomposites

Synthesis and Characterization of Polyimide/Silica Nanocomposite Films

Preparation and Properties of Poly[styrene‐co‐(butyl Acrylate)‐co‐(acrylic Acid)]/silica Nanocomposite Latex Prepared Using an Acidic Silica Sol

Preparation and Property of Composite Films of Polymer-Polyvinyl Alcohol/nm-Silica

Film‐forming Behavior and Mechanical Properties of Colloidal Silica/polymer Latex Blends with High Silica Load

Synthesis and Film Performances of SiO2/P(MMA-BA) Core–shell Structural Latex

Enhanced Properties of Poly(lactic Acid) with Silica Nanoparticles

Synthesis of UV-Cured Silicone Resin/Silica Nanocomposites from UV-Curable Polysilisiquioxane and Methacrylate-Functionalized Silica

Controlled surface modification of poly(methyl methacrylate) film by fluoroalkyl end-capped vinyltrimethoxysilane oligomeric silica/hexagonal boron nitride nanocomposites

Synthesis and Characterization of Parylene C/nanosilica Composite Film

Transparent Poly(methyl Methacrylate)/silica/zirconia Nanocomposites with Excellent Thermal Stabilities

Synthesis and Characterization of Nanocomposite of Polyimide-Silica Hybrid from Nonaqueous Sol-Gel Process

Influence of Fluorine-Containing Monomer Content on the Hydrophobic and Transparent Properties of Nanohybrid Silica Polyacrylate Coating Materials

Silica Coating of Nonsilicate Nanoparticles for Resin-Based Composite Materials