Abstract:In order to solve the challenge that battery performance rapidly deteriorates at a high temperature condition of 100 °C or higher, ZrO2-TiO2 (ZT) with various Zr:Ti ratios synthesized by a sol-gel method were impregnated in a Nafion membrane. Through material characterization, a unique ZT crystal phase peak with a Zr-O-Ti bond was identified, and the band range associated with this bond and intrinsic functional group region could be identified. These prepared powders were blended with 10% (w/w) Nafion-water dispersion to prepare composite Nafion membranes (NZTs). The water uptake increased and the ion exchange capacity decreased as the TiO2 content increased in the NZTs in which particles were uniformly distributed. These results were superior to those of the conventional Nafion 112. The electrochemical properties of all membranes was measured using a polarization curve in a single cell with a reaction area of 9 cm2, and the operating conditions in humidified H2/air was 120 °C under 50% relative humidity (RH) and 2 atm. The composite membrane cell with nanoparticles of a Zr:Ti ratio of 1:3 (NZT13) exhibited the best electrochemical characteristics. These results can be explained by the improved physicochemical properties of NZT13, such as optimized water content and ion exchange capacity, strong intermolecular forces acting between water and nanofillers (δ), and increased torsion by the fillers (τ). The results of this study show that the NZT membrane can replace a conventional membrane under high-temperature and low-humidity conditions. To examine the effect of the content of the inorganic nanomaterials in the composite membrane, a composite membrane (NZT-20, NZT-30) having an inorganic nano-filler content of 20 or 30% (w/w) was also prepared. The performance was high in the order of NZT13, NZT-20, and NZT-30. This shows that not only the operating conditions but also the particle content can significantly affect the performance.

Effects of Nafion Membrane Modification on Oxygen Purity in PEM Water Electrolyze

Effects of Microstructure on the Retention of Proton Conductivity of Nafion/SiO2 Composite Membranes at Elevated Temperatures:An in Situ SAXS Study

Impacts of Catalyst Nanolayers on Water Permeation and Swelling of Polymer Electrolyte Membranes

Electrochemical Analysis of Polymer Membrane with Inorganic Nanoparticles for High-Temperature PEM Fuel Cells

Unraveling the Influence of Nafion Content on the Performance of Proton-Exchange Membrane Fuel Cells from the Perspective of Triple-Phase Boundary

Impact of SiO2 Modification on the Performance of Nafion Composite Membrane

Development of High-Performance Polymer Electrolyte Membranes through the Application of Quantum Dot Coatings to Nafion Membranes

Enhanced properties of Nafion nanofibrous proton exchange membranes by altering the electrospinning solvents

Suppressing Hydrogen Crossover and Scavenging Radicals By Incorporation of Pt and Cerium-Zirconium Oxide for Polymer Electrolyte Water Electrolyzers

Improved Performance of Sulfonated Poly Ether Ether Ketone/three-Dimensional Hierarchical Molybdenum Disulfide Nanoflower Composite Proton Exchange Membrane for Fuel Cells

A Highly Stable Reinforced PEM Assisted by Resveratrol and Polydopamine-Treated PTFE

Improved performance of nafion membranes by blending ultra-high molecular weight polyvinylidene fluoride

Recent developments in high-performance Nafion membranes for hydrogen fuel cells applications

Sulfated titania as additive in Nafion membranes for water electrolysis applications

Composite Proton Conductive Membranes for Elevated Temperature and Reduced Relative Humidity PEMFC

Fabrication and characterization of a novel Nafion‐PTFE composite hollow fiber membrane

Proton-Conducting Polymer-Coated Carbon Nanofiber Mats for Pt-Anodes of High-Temperature Polymer-Electrolyte Membrane Fuel Cell

Engineering Mesoporosity Promoting High-Performance Polymer Electrolyte Fuel Cells

Property Enhancement Effects of Side-Chain-Type Naphthalene-Based Sulfonated Poly(arylene ether ketone) on Nafion Composite Membranes for Direct Methanol Fuel Cells

Enhancing the Chemical Stability of Poly(isatin terphenyl)-Based Anion Exchange Membranes by Cross-Linking with Quaternary Ammonium-Functionalized Noria

Features of the Degradation of the Proton-Conducting Polymer Nafion in Highly Porous Electrodes of PEM Fuel Cells