Abstract:The elastic-plastic Richtmyer-Meshkov instability of multiple interfaces is investigated by numerical simulation using a multimaterial solid mechanics algorithm based on an Eulerian framework. This Richtmyer-Meshkov instability problem is realized by a copper layer that is flanked by vacuum and a copper block of different material strength. The research efforts are directed to reveal the influence of the layer thickness and material strength on the deformation of the perturbed solid-vacuum interface impacted by an initial shock. By varying the initial thickness ( xI ) of the copper layer and the yield stress ( σY2 ) of the copper block, two deformation modes, which have been identified as the broken mode and the stable mode, are closely scrutinized. For a fixed xI and a decreasing σY2 , the reflected rarefaction waves (RRWs), developing after the initial shock impacts the perturbed interface 1 (I1) between vacuum and the copper layer, become stronger after traveling across the interface 2 (I2). Subsequently, the velocity of I2 becomes larger, causing the width of I1 to grow larger. This width growth of I1 leads to a final separation of the spike from I1 and, consequently, the deformation mode changes from the stable mode to the broken mode. For a fixed σY2 and a decreasing xI , the RRWs impact I2 at an earlier moment with a greater strength and thus the deformation mode changes from the stable mode to the broken mode. Meanwhile, the comparison of the spike width of cases whose deformation mode is the broken mode shows that there exists a maximum value of rescaled spike width, at which the deformation mode changes from the stable mode to the broken mode. https://doi.org/10.1103/PhysRevE.109.035102 ©2024 American Physical Society

The Elastic-Viscoplastic Field Near Mode Ii Dynamic Propagating Crack-Tip of Interface in Double Dissimilar Materials

The strain gradient viscoelasticity full field solutions for Mode-I and Mode-II crack problems

Theoretical solutions for 2D mode-I crack-tip stress fields in power-law plastic materials based on the stress factor derived from the developed median-energy-density equivalence method

An elastic-plastic cohesive zone model for metal-ceramic interfaces at finite deformations

A Transverse Crack Tip Field in Bimaterial

Cohesive zone modeling for viscoplastic behavior at finite deformations

Dynamic-Response of Mode-Iii Interface Crack in Bonded Materials

Interaction Between a Screw Dislocation and a Circular Inhomogeneity with an Interfacial Crack in Viscoelastic Media

Influences of material mismatch on interface crack tip field in three layered creeping materials

Mechanics of dynamic debonding

Crack propagation at the interface between viscoelastic and elastic materials

Unified theoretical solutions for describing the crack-tip stress fields of mode-II cracked specimens under the fully plastic condition

Crack Propagation In Viscoplastic Polymers: Heat Generation In Near-Tip Zone And Viscoplastic Cohesive Model

A STUDY OF DYNAMIC CAUSTICS AROUND RUNNING INTERFACE CRACK TIP

Crack-tip Fields of an Anti-Plane Crack in Micropolar Elastic Solids

Numerical simulations of elastic-plastic Richtmyer-Meshkov instability of multiple interfaces

Plastic Mismatch Effect on Plasticity Induced Crack Closure: Fatigue Crack Propagation Perpendicularly Across a Plastically Mismatched Interface

Effect of Inhomogeneous Mechanical Properties on the Stress-Strain Field at the Crack Tip and Crack Growth Direction in Dissimilar Metal Welded Joints

Study on Elastic Mixed Mode Fracture Behavior and II-III Coupling Effect

Elastic Fracture Mechanics Concepts for Interfacial Cracks

Uniformly moving screw dislocation interacting with interface cracks in anisotropic bimaterials