Perfluorosulfonic acid proton exchange membrane with double proton site side chain for high-performance fuel cells at low humidity
Hongyun Tan,Shengqiu Zhao,S. Eltahir Ali,Shuhong Zheng,Abdullah K. Alanazi,Rui Wang,Haining Zhang,Hala M. Abo-Dief,Ben Bin Xu,Hassan Algadi,Handong Li,Priyanka Wasnik,Zhanhu Guo,Haolin Tang
DOI: https://doi.org/10.1016/j.jmst.2023.03.049
2023-01-01
Abstract:Structural optimization of ionomers is an effective strategy for achieving high-performance proton exchange membranes (PEMs) under low relative humidity (RH) conditions. In this study, sulfonimide group and trifluoromethanesulfonate acid (TFSA) ionic liquids were introduced to the perfluorosulfonic acid (PFSA) side chain, resulting in polymer membranes with varying chain lengths (i.e., PFC 2 -TF-SI, PFC 4 -TF-SI, and PFC 5 -TF-SI). This dual proton-conducting structure extended the length of the hydrophilic side chain and enhanced the hydrophobic-hydrophilic phase separation, aiding in the formation of proton transport channels. Notably, the proton conductivity of PFC 5 -TF-SI and PFC 2 -TF-SI membranes reached 7.1 and 10.6 mS/cm at 30% RH and 80 & DEG;C, respectively, which were approximately 29.1% and 92.7% higher than that of the pristine PFC 5 -SA membrane (5.5 mS/cm). Furthermore, the maximum power density of the PFC 5 -TF-SI and PFC 2 -TF-SI membranes from the built single fuel cell achieved 649 and 763 mW/cm 2 at 30% RH and 80 & DEG;C, respectively, which were higher than that of the pristine PFC 5 -SA membrane (567 mW/cm 2 ) by about 14.5% and 34.6%, respectively. Thus, this study provides a strategy for PEM design under low RH conditions.& COPY; 2023 Published by Elsevier Ltd on behalf of The editorial office of Journal of Materials Science & Technology.