Abstract:A very compact waveguide orthomode transducer (OMT) is described in this paper. The design is characterized with a twofold rotationally symmetric cross-section in the probing area, adapted from a side-coupling OMT design, simultaneously enabling low port-to-port coupling and high cross-polarization discrimination (XPD) over a fractional bandwidth of about 15-20%. Compared to previously reported compact waveguide OMTs, the proposed design is simpler, thus facilitating its manufacture at millimeter-wave frequencies. The concept is demonstrated with a design in the K-band for a broadband communication satellite downlink over the frequency band of 17.3-20.2 GHz. For test purposes, transitions to standard waveguide WR42 are included, and the OMT is assembled with a conical horn antenna. The measured reflection and coupling coefficients are below -19.5 dB and -22.9 dB, respectively, over the nominal bandwidth, and they are in good agreement with the simulation's results. The on-axis XPD, measured in an anechoic chamber, is better than 30 dB over the nominal bandwidth, which is also in line with simulations. The proposed waveguide OMT may be designed to fit in a lattice below one wavelength at the highest operating frequency, which is desirable for dual-polarized closely spaced array antennas in low and medium Earth orbit communication satellite systems. The simple mechanical design of the proposed OMT makes it particularly appealing for additive manufacturing techniques, as demonstrated with a variant of the design having folded single-mode waveguides, which preserves the RF properties of the original design.

Development of a 385-500 GHz Orthomode Transducer (OMT)

Development of a Submillimeter Double-Ridged Waveguide Ortho-Mode Transducer (OMT) for the 385–500 GHz Band

Broad-Band Orthomode Transducers

Optimization of Asymmetric Orthomode Transducer at Terahertz Frequency

170–260-Ghz Ultrawideband and High Isolation Orthomode Transducer Based on Symmetric Reverse Coupling Structure

Double-Ridged Waveguide Orthomode Transducer for terahertz wireless transmission link

A Design of Terahertz Wave Orthomode Transducer (OMT)

A high-performance compact WR-4 orthomode transducer for wideband communications

Development of Wideband Orthomode Transducers for FAST Cryogenic Receiver System

Performance of the ALMA Band 10 SIS Receiver Prototype Model

A Sensitive ALMA Band 10 SIS Receiver Engineering Model

Development of ALMA Band 8 (385-500 GHz) Cartridge

Development of Broadband Planar Ortho-mode Transducer with MKID for LiteBIRD Satellite

Design of a Compact Waveguide Orthomode Transducer at Terahertz Frequency

Compact W-Band Septum Orthomode Transducer Based on Gap Waveguide

Very Compact Waveguide Orthomode Transducer in the K-Band for Broadband Communication Satellite Array Antennas

Wideband Turnstile Junction Coaxial Waveguide Orthomode Transducer

Development of Octave-Band Planar Orthomode Transducer with Kinetic Inductance Detector for Litebird

Near-field Beam Pattern Measurement of Qualification Model of ALMA Band 8 (385–500 GHz) Cartridge Receiver

Design of a Multi-Band Orthomode Transducer for Radiometers

A 385-500 GHz Low Noise Superconductor-Insulator- Superconductor Mixer for ALMA Band 8.