Abstract:Polymer nanocomposites have attracted great attention because of the demand for polymer materials with high performance and high functionality at the same time. Nano CaCO3 and SiO2 can be used to improve the rigidity of polypropylene (PP), which is quite importance for biaxial orientation PP film. However, the effect of these nano fillers on natural photo-oxidation degradation of PP has not been studied. In the present paper, the natural photo-oxidation profiles along the depth of PP and PP nanocomposites bars were studied with infrared microscope (IM) as well as polarizing lighu microscope (PLM) and scanning electron microscope (SEM). The results indicated that nano CaCO3 and SiO2, especially the latter, accelerated the oxidation rate of PP significantly, with more and deeper surface cracks. Larger amount of nano filler gave rise to greater oxidation degradation. The existence of nano CaCO3 and SiO2 helped to diminish the spherulite and broaden the transition region from amorphous to crystal The oxidation development along the depth in PP nanocomposites depended on the diffusion rate of oxygen and underwent two stages. In the first stage, the oxidation degree increased with time because of the low density in the transition region. In the layer under this region, the oxidation is difficult to occur owing to the high density of crystals and oxygen starvation. Therefore, the oxidation depth profiles decreased to near zero at nearly the same depth--about 200 microm from the exposed surface, corresponding to the transition region in PLM observation, namely surface oxidation layer. The high degree of oxidation in the surface layer gave rise to crack formation, and these surface cracks helped further oxidation in PP nanocomposites. In the second stage, the interconnection of surface cracks resulted in the fracture of the seriously oxidized surface oxidation layer. Consequently, the oxidation of the subsurface layer began and the depth profile developed to deeper place. In PP, the much thinner surface amorphous layer and the relatively perfect crystallization under it were responsible for the higher stability during the natural exposure.

Study on the Natural Aging of Polycarbonate by FTIR

Degradation Behavior of Polycarbonate in Different Damp and Heat Natural Environments

Studies of accelerated aging of phthalocyanine films for optical storage

Physics and Chemistry-Based Constitutive Modeling of Photo-Oxidative Aging in Semi-Crystalline Polymers

Natural Photo-Aging Degradation of Polypropylene Nanocomposites

Photoantioxidant Versus Photodegradant: Action of Nanoparticle Inorganic Fillers in Outdoor Aging of PP

A rapid and highly sensitive evaluation of polymer composite aging with linear correlation to real-time aging

Study on Multi-factor Coupling Aging Kinetics of Polyolefins: Yearly and Monthly Aging Speed Maps

A Novel Aging Evaluation System and the Application to Polyethylene Composites

Application of Infrared Spectroscopy in Research on Aging of Silicone Rubber in Harsh Environment

Thermal Degradation Behavior and Flame Retardancy of Polycarbonate Containing Poly[(phenylsilsesquioxane)-co-(dimethylsiloxane)] and Potassium Diphenyl Sulfonate

Natural ageing of nanostructured titania photocatalyst films

The Aging Behavior of Spray-free Polypropylene Composites

Terahertz dielectric spectroscopy based thermal‐oxidative aging analysis of polyvinyl chloride

Investigations on Aging Behavior and Mechanism of Polyurea Coating in Marine Atmosphere

Online study of the plasma-accelerated aging process and toxicity of polyethylene terephthalate

Color Changes and Mechanical Properties of Glass Fiber Reinforced Polycarbonate Composites after Thermal Aging

Interfacial Effects on Photooxidative Aging of Silica-Filled Polypropylene Composites

[Study on Natural Photo-Oxidation Degradation of Polypropylene Nanocomposites by Infrared Microscopy].

Effects of Coupling Agents on the Natural Aging Behavior and Oxidation Profile of High‐density Polyethylene/sericite Composites

Terahertz Dielectric Spectroscopy Based Thermal Aging Analysis of Polypropylene