Abstract:Catalytic routes for upgrading CO2 through Sabatier reaction CO 2 + 4 H 2 → CH 4 + 2 H 2 O have been studied for decades. To avoid water adsorption and catalyst aging, the process must be operated at 300-400 °C, which subsequently causes carbon deposition and catalyst deactivation. Non-thermal plasma is a promising approach to overcoming the barriers associated with CO2 dissociation and conversion, and avoid the carbon deposition observed in a traditional Sabatier reaction. This study elucidated; 1) the impacts of reactor geometry and plasma condition on plasma discharge; 2) the synergism between active site (Ni and Co) and catalyst support; and 3) the impact of catalyst promoter (Ru) on CO2 conversion, methanation yield, and selectivity. The physics and chemistry of plasma were investigated in 6 different reactor geometries using 28 different catalysts. The plasma physics was discussed as a function of discharge characteristics, capacitance properties, reduced electric field, power consumption, and reactor temperature. CO2 conversion, CH4 yield, and CH4/(CO+ CH4) selectivity are reported and compared with those under thermo-catalysis at 400 °C. In addition, carbon deposition on the surface of high-voltage electrodes as a result of Joule heating was investigated. In contrast to γAl2O3, CO selectivity was dominant in SiO2-supported catalysts. In terms of active sites, the following trend was observed for CO2 conversion, methanation, and yield: Ru>Ni>Co. The addition of Ru promoter played a more prominent role in enhancing CH4/(CO+ CH4) selectivity, other than production yield or conversion. Except for SiO2-Ni15 and SiO2-Co15, all the catalysts showed a higher methane yield in plasma discharge at 150-170 °C than thermal conversion at 400 °C.

Modification of Ni/SiO<sub>2</sub>Catalysts by Means of a Novel Plasma Technology

Modification of Ni/Sio2 Catalysts by Means of A Novel Plasma Technology

Characterization of Al2O3 Supported Nickel Catalysts Derived from RF Non-thermal Plasma Technology

High activity and strong coke resistance of nickel CO 2 -CH 4 reforming catalyst promoted by different plasma treated modes

Preparation and Characterization of A Plasma Treated Nimgsba-15 Catalyst for Methane Reforming with Co2 to Produce Syngas

Development of Coke Resistant Ni Catalysts for CO(2) Reforming of Methane via Glow Discharge Plasma Treatment

Plasma Enhanced Preparation of Highly Dispersed Ni/Al2O3 Catalyst for CO2 Reforming of Methane

Carbon Dioxide Reforming of Methane over Ni/Al2O3 Treated with Glow Discharge Plasma

Coupling bimetallic Ni-Fe catalysts and nanosecond pulsed plasma for synergistic low-temperature CO2 methanation

Structure and Reactivity of Plasma Treated Ni/Al2O3 Catalyst for CO2 Reforming of Methane

Preparation of Pt/CNT catalyst with high dispersion structure via plasma jet

Plasma Treatment of Ni Catalyst for Partial Oxidation of Methane

Plasma-catalytic CO2 methanation over Ni supported on MCM-41 catalysts: Effect of metal dispersion and process optimization

Plasma Promotes Dry Reforming Reaction of CH4 and CO2 at Room Temperature with Highly Dispersed NiO/γ-Al2O3 Catalyst

Remarkable Enhancement in the Dispersion and Low-Temperature Activity of Catalysts Prepared Via Novel Plasma Reduction-Calcination Method

Shielding Protection by Mesoporous Catalysts for Improving Plasma-Catalytic Ambient Ammonia Synthesis

Effect of Catalysis on Plasma Assisted Catalytic Removal of Nitrogen Oxides and Soot

Plasma-catalytic ammonia synthesis on Ni catalysts supported on Al2O3, Si-MCM-41 and SiO2

Dry reforming of methane in an atmospheric pressure plasma fluidized bed with Ni/γ-Al2O3 catalyst

Plasma Assisted Preparation of CoPt/SiO2 Fischer‐Tropsch Catalysts: A Comparison of the Precursor Pre‐Thermal Treated Temperatures

Catalytic Non-Thermal MilliPulse Plasma for Methanation of CO2 without Carbon Deposition and Catalyst Deactivation