Abstract:The effect of preparation method. Mo content, pretreatment conditions, space velocity, reaction temperature on the preformance of methane aromatization under oxygen-free conditions over HZSM-5 supported Mo catalyst has been studied, the effect of carbon deposition on catalyst after reaction and regeneration by carbon burning with O2 was investigated. It was found that the initial activity of catalysts prepared by grinding technique was higher than that of catalysts prepared by impregnating technique, but the activity of the former decreased quickly with reaction time increased, and decreased obviously after regeneration, while the activity of the latter was similar to that of fresh catalysts. The catalyst with Mo content of 3. 5%��4. 0% showed the best aromatization activity. Decreasing space velocity and increasing reaction temperature improved the aromatization activity. With reaction time increased, the selectivity for ethylene enhanced while selectivity for benzene decreased. Furthermore, XPS results suggested that the most of Mo6+ in the catalysts prepared by impregnating method dispersed in the framework of HZSM-5 zeolite and those of grinding method dispersed on the surface of HZSM-5 zeolite, the carbon content on the catalyst surface increased rapidly, and Mo6+ in the ground catalysts was reduced to Mo0 after reaction for 4 h. On the basis of these results, it is proposed that molybdena carbene with configuration of MoO3 = CH2 is an initial product of methane aromatization reaction.

Preparation and effect of Mo-V-Cr-Bi-Si oxide catalysts on controlled oxidation of methane to methanol and formaldehyde

Preparation of multicomponent oxide catalysts for CH4 oxidation by coprecipitation methods

Controlled partial oxidation of methane to methanol/formaldehyde over Mo–V–Cr–Bi–Si oxide catalysts

In Situ Fabrication of Highly Active Γ-Mno2/smmno3 Catalyst for Deep Catalytic Oxidation of Gaseous Benzene, Ethylbenzene, Toluene, and O-Xylene.

Preparation and Characterization of P–Mo–V Mixed Oxide-Incorporating Mesoporous Silica Catalysts for Selective Oxidation of Methane to Formaldehyde

Catalytic Performance of the Sb–V Mixed Oxide on Sb–V–O/SiO 2 Catalysts in Methane Selective Oxidation to Formaldehyde

Characterization and Catalytic Performance of Zr-Mo-Oxide Catalysts for Selective Oxidation of Methane to Formaldehyde

On the Role of Vanadia Species for VOx／SiO2 in the Selective Oxidation of Methane

Effect of Vanadium and Bismuth Promoters on Direct Partial Oxidation of Methane

Highly Selective Oxidation of Methanol to Dimethoxymethane over So42-/V2o5-Zro2

Crystalline Microporous MoVBiO Polyoxometalates for Indirect Oxidation of Methanol to Methyl Formate: Effects of Organic Additives on Crystals Size and Catalytic Performance

VOx Molecular Level Grafted G-C3n4 for Highly Selective Oxidation of Methanol to Dimethoxymethane

Comparative studies on direct conversion of methane to methanol/formaldehyde over La–Co–O and ZrO 2 supported molybdenum oxide catalysts

Investigation on the Performance of Supported Molybdenum Carbide for the Partial Oxidation of Methane

A Composite Fe–V/g-C3N4 for Liquid-Phase Selective Oxidation of Methanol with O2 Oxidant

Selective oxidation of methane on SBA-15 supported P-Mo-V oxide catalysts

Selective Oxidation Of Methane To Methanol Over Wo3/Co-Fe-Mo-O Catalysts.

Study on direct aromatization reaction of methane: I. The reaction performance of supported Mo catalysts under oxygen-free conditions

Selective oxidation of methane to formaldehyde over Mo/ZrO2 catalysts

Studies on the SbOx Species of SbOx/SiO2 Catalysts for Methane-Selective Oxidation to Formaldehyde

Tailoring the textural and component properties of Mo-Bi based catalysts for the selective oxidation of tert-butanol to methacrolein by the assistance of polymethymethacrylate