Abstract:To pursue superior yield strength and maintain high ductility of CrCoNi medium entropy alloy (MEA) at room temperature, 1.0 at% W and 2.0 at% Mo were added to the CrCoNi alloy to ensure a single-phase solid solution strengthening in face-centered cubic structure. The effects of W and Mo additions on microstructure evolution and strengthening mechanism was investigated in detail. The results indicated that discontinuous dynamic recrystallization is the main recrystallization mechanism during annealing. The co-additions of W and Mo with a higher melting point can strengthen the interatomic bonding force and increase the activation energy of grain growth to 409.62 KJ/mol, which leads to sluggish diffusion and retards the recrystallization progress. The high activation energy for grain growth would restrain the grain growth and obtain significantly finer grains of (CrCoNi)97W1Mo2 alloy than that of CrCoNi alloy under similar thermomechanical processing. Smaller grains can impose a stronger grain boundary strengthening and dominate the yield strength enhancement. The strength improvement resulting from grain boundary is 252 MPa for this alloy with the grain size of 1.20 μm. Besides, the co-additions of W and Mo increase the lattice parameter to 0.3610 nm owing to their larger atomic radius and higher shear modulus, then intrinsic lattice friction calculated by the Hall-Petch equation is significantly increased to 289 MPa, which indicated a stronger solid solution strengthening effect (~47 MPa) by severe lattice misfits. Above all, the comprehensive effect of the above aspects of W and Mo additions has developed superior yield strength of 698 MPa and ultimate tensile strength of 1141 MPa. The yield strength of this new alloy enhances by nearly 300 MPa and maintains a high ductility compared with CrCoNi alloy followed under similar thermomechanical processing.

Distribution of Mo at Grain Boundary of 1300mpa Crmo Steel

Eels and Eds Fracture Mode Analysis at Grain Boundaries of Cr-Mo Steel

EFFECT OF MOLYBDENUM ON DELAYED FRACTURE BEHAVIOR OF HIGH STRENGTH STEEL

New Insights of the Microcrack Initiation Induced by Mo Addition in Ni-based Single Crystal Superalloys During Creep at 900 °C

Refinement mechanism of nanoscale Cu-rich precipitates by Mo addition and its effect on strength-toughness of Cu-bearing low carbon high strength steel

Study Of Ultra-High Strength Crmo Steel By Use Of Tem, Eds And Eels

Effect of Cr–Mo addition on the microstructure and mechanical properties of medium‐carbon steel

Unexpected strengthening of the Mo-containing low-density steel achieved through a novel nano-ordered phase

The Role of Molybdenum on Room Temperature Tensile Behavior of Recrystallized Fe30Mn5Al1CxMo Lightweight Austenitic Steels

Effect of Molybdenum on the Impact Toughness of Heat-Affected Zone in High-Strength Low-Alloy Steel

Microstructure and mechanical properties of a novel medium Mn steel with Cr and Mo microalloying

Deciphering the effect of W and Mo co-additions on recrystallization behavior and strengthening mechanism of CrCoNi medium entropy alloy

Developing a uniform distribution of bimodal α-Mo grains in the Mo–Si–B alloy for toughness and strength improvement

Strengthening the grain boundary of Mo alloy via little TiC addition

Effect of Mo microalloying on impact toughness of X80 pipeline steel in SCGHAZ

The role of Mo on the creep deformation of a 4th generation Ni-based single crystal superalloy at 1100 °C

Early segregation and precipitation at triple junction in an alumina-forming austenitic steel

Effect of grain boundary character on isothermal phase transformation and mechanical properties of Co-Cr-Mo alloy fabricated by selective laser melting

Effect of stress on the nucleation and evolution of Mo-rich Laves phase in 9.5Cr-1.5MoCoVNbNB heat-resistant steel during tensile rupture at 620 °C

Tensile behavior and microstructure evolution of Mo-14 %Re alloy at room temperature and elevated temperatures

Effect of Mo on Intergranular Corrosion Behavior in Super-austenitic Stainless Steel