Abstract:Cavitation is a complex multiphase phenomenon characterised by vapour bubbles forming due to a sudden pressure drop and is often accompanied by increased hull vibrations, increased radiated noise and decrease in propeller and impeller performance. Although the Reynolds-Averaged Navier-Stokes (RANS) method coupled with a cavitation model is still considered a practical tool to predict cavitating flows owing to its computational efficiency, it is unable to predict the unsteadiness of vapor shedding and over-predicts the eddy viscosity. To improve the prediction, an empirical eddy viscosity correction,[Reboud et al. 1998] was proposed to consider the compressibility effects produced by cavitation. Additionally, a new type of models termed as hybrid RANS-Large Eddy Simulation (LES) models have also been recently introduced in the community, having the ability to behave as a RANS or a LES model in different regions of the flow in order to combine the computational cost efficiency of RANS with the accuracy of LES modelling. However, there exists a lack of a comprehensive review of various such turbulence models like the k-{\omega} Shear Stress Transport Model (SST), k-{\omega} SST Scale-adaptive Simulation (SAS), k-{\omega} SST Detached Eddy Simulation (DES), k-{\omega} SST Delayed DES (DDES), Filter-Based Method (FBM) and Partially-Averaged Navier Stokes Method (PANS) to predict cavitating flows. In this work, we conduct such a review to compare their ability to predict cloud cavitating flows by comparing them with x-ray experimental data in a venturi. It is shown that with mesh refinement, standard models do show the vapor unsteadiness as seen in the experiment similar to that seen when using the Reboud correction. However, on local comparison of turbulence quantities, it is observed both forms of models have huge discrepancies with experimental data that does not improve downstream.

New Evaluation Of The K-Epsilon Turbulence Model For Free Buoyant Plumes

Simulation of vertical round turbulent jets in shallow water

Application Of The K-Epsilon Turbulence Model To Buoyant Adiabatic Wall Plumes

Application of the K-Ε Turbulence Model to Buoyant Adiabatic Wall Plumes

Numerical Modelling of Bubbling Flow Dynamic Behaviour in a Bubble Column

Comparison of Turbulence Models in Simulation of Plane Jet Flow

A K- Ɛ Turbulence Model Considering Compressibility in Three-Dimensional Transonic Turbulent Flow Calculation

The Turbulence Models for Numerical Analysis of Liquid Kerosene Supersonic Combustion

Application and comparison of different turbulence models in the simulation of numerical wave flume

K-Ε-based TURBULENCE MODELS FOR SIMULATION OF CLOUD CAVITATING FLOWS

A k-ε turbulence model for bubbly two phase flow and prediction of liquid velocity and turbulent kinetic energy distribution

Numerical modeling of air entrainment by turbulent plunging jet and aerated flow in the plunging pool

Reynolds-average Navier-Stokes turbulence models assessment: A case study of CH4/H2/N2-air reacting jet

A comparative evaluation of turbulence models for simulation of unsteady cavitating flows

Assessment of Six Turbulence Models for Modeling and Predicting Narrow Passage Flows, Part1: Impingement Jets

A Numerical Study On The Stability Of A Vertical Plane Buoyant Jet In Confined Depth

Positivity of κ-epsilon turbulence models for incompressible flow

A Comparative Analysis of Different Turbulence Models for Simulating Complex Turbulent Separated Flows over Cubic Geometries

A modified k-ε turbulence model for compressible flow application

A Scale-Adaptive Turbulence Model Based on the k-Equation and Recalibrated Reynolds Stress Constitutive Relation

Computational Study of Bubbly Jets in Stagnant Water