Abstract:A thick-walled SUS316 saddle tube-pipe welded joint is used in nuclear power equipment. A very long computing time and huge memory space are needed to simulate welding residual stress when the thermo-elastic-plastic finite element method is used because of the complex shapes, large sizes, and many weld passes of this joint. To solve the computational problem, two efficient and accurate computational approaches were proposed based on MSC. Marc finite element software platform. In the first computational approach, the finite element model of the SUS316 saddle tube-pipe welded joint was established with the same dimensions as the actual joint. Two heat sources were used to balance the computing time and calculation precision. The moving heat-source model was used to simulate the heat input for the backing and cover passes. In contrast, the instantaneous heat-source model was employed to consider the heat input for the other passes. Considering the geometric symmetry, a quarter model was developed in the second computational approach, and the instantaneous heat-source model was used to model the heat input for all passes. In the material model, both work hardening isotropic rule and annealing effect were considered because SUS316 is sensitive to work hardening. The simulation results of the thermal cycle during the welding process and residual stress distribution in and near the fusion zone were compared using the measured data. The results of thermal cycles and the residual stress distributions obtained using two computational approaches matched the experimental measurements. When the first computational approach was used, not only the residual stress distribution in the whole welded joints could be obtained, but also the features of residual stress distribution near the weld start-end location were able to capture. The second computational approach could predict the magnitude and distribution of residual stress in the stable range of the joint and could save computing time and huge memory space. Thus, the second computational approach is useful for practical engineering applications.

Predicting Welding Residual Stresses in A Dissimilar Metal Girth Welded Pipe Using 3d Finite Element Model with A Simplified Heat Source

Prediction of Residual Stresses in a Dissimilar Metal Welded Pipe with Considering Cladding, Buttering and Post Weld Heat Treatment

Assessing the Residual Stresses in Dissimilar Welded Joint: Depth-Sensing Indentation Testing and Numerical Simulation

Prediction of Residual Stress Distributions in Welded Sections of P92 Pipes with Small Diameter and Thick Wall Based on 3D Finite Element Simulation

FEM prediction of welding residual stresses in a SUS304 girth-welded pipe with emphasis on stress distribution near weld start/end location

Finite Element Analyses of Residual Stresses in Typical Welded Joints Used in Nuclear Power Plants and Comparisons with Experiments

Numerical and Experimental Investigations on Welding Residual Stress in Multi-Pass Butt-Welded Austenitic Stainless Steel Pipe

Three-dimensional finite element analysis of residual stresses in dissimilar steel pipe welds

Numerical Simulation and Development of Efficient Calculation Method for Residual Stress of SUS316 Saddle Tube-Pipe Joint

Simulating Welding Residual Stress and Deformation in a Multi-Pass Butt-Welded Joint Considering Balance Between Computing Time and Prediction Accuracy

Thermal, metallurgical and mechanical analysis of circumferentially multi-pass welded P92 steel pipes

Numerical Simulation and Experimental Verification of Residual Stress in the Welded Joints of Weldolet–Branch Pipe Dissimilar Steels

Influence of Material Model on Prediction Accuracy of Welding Residual Stress in an Austenitic Stainless Steel Multi-pass Butt-Welded Joint

Numerical Simulation of Temperature Field and Residual Stress in Multi-Pass Welds in Stainless Steel Pipe and Comparison with Experimental Measurements

Prediction of Residual Stresses Within Dissimilar Al/steel Friction Stir Lap Welds Using an Eulerian-based Modeling Approach

Influence of Size Factor on Calculation Accuracy of Welding Residual Stress of Stainless Steel Pipe by 2D Axisymmetric Model

Numerical Simulation of Welding Residual Stresses in A Multi-Pass Butt-Welded Joint of Austenitic Stainless Steel Using Variable Length Heat Source

Experimental Characterisation and Numerical Modelling of Residual Stresses in a Nuclear Safe-End Dissimilar Metal Weld Joint

Numerical Simulation Analysis of Welding Residual Stress on Dissimilar Metal Welded Pipes

Numerical simulation of residual stresses induced by laser beam welding in a SUS316 stainless steel pipe with considering initial residual stress influences

Influences of Heat Source Model on Welding Residual Stress and Distortion in a Multi-Pass J-groove Joint