Abstract:In this study, we demonstrate the direct in-situ synthesis of NiTi alloys with tunable chemical composition (Ni/Ti atomic ratio) and corresponding thermomechanical response. This synthesis is achieved by regulating the feeding speed ratio of pure Ni and Ti wires during the additive manufacturing process based on dual-wire-feed electron beam directed energy deposition (EB-DED) technology. Under appropriate process conditions, the resulting NiTi alloys exhibit a controllable evolution around the nearequiatomic composition and display a typical columnar grain morphology characteristic of additively manufactured NiTi alloys. With an increase in Ni content (shifting from Ti-rich to Ni-rich), the second phase particles present in the samples change from Ti-rich phase (Ti2 Ni) to Ni-rich phases (such as Ni4 Ti3 and Ni3 Ti2 ). The phase transformation temperatures gradually decrease with increasing Ni content, and the predominant matrix phase transitions from martensite to austenite. The as-built NiTi alloy exhibits a typical tensile curve with a good tensile elongation of 11 %, fabricated under suitable composition and microstructure conditions. This result surpasses values reported in current in-situ synthesized NiTi alloys through additive manufacturing methods. Moreover, it almost reaches the levels achieved by additively manufactured NiTi alloys using pre-alloyed raw materials. Furthermore, this study reports, for the first time in the field of in-situ synthesized NiTi alloys, a good tensile shape memory effect, achieving an impressive recovery rate of up to 70 % under a tensile strain of 6 %. This investigation provides a meaningful theoretical perspective and technical strategy for the integrated customization of NiTi alloy components in structure, composition, and function. This low-cost and high-efficiency approach is particularly attractive for the preparation of functional graded, large-scale and disposable NiTi components. (c) 2024 Published by Elsevier Ltd on behalf of The editorial office of Journal of Materials Science & Technology.

Fine-Grained Bulk NiTi Shape Memory Alloy Fabricated by Rapid Solidification Process and Its Mechanical Properties and Damping Performance

Lightweight NiTi Shape Memory Alloy Based Composites with High Damping Capacity and High Strength

Solidification characterization and its correlation with the mechanical properties and functional response of NiTi shape memory alloy manufactured by electron beam freeform fabrication

Microstructure, Shape Memory Effect and Mechanical Properties of Rapidly Solidified Co–Ni–Al Magnetic Shape Memory Alloys

Microstructure Evolution and Functional Response of NiTi Shape Memory Alloy Manufactured by Dual-Wire Electron Beam Freeform Fabrication

PREPARATION OF NANO-SIZED SiC REINFORCED NiTi SHAPE MEMORY COMPOSITES AND THEIR MECHANICAL PROPERTIES AND DAMPING BEHAVIOR

Toward additive manufactured crack-free NiTiCu shape memory alloys with low-hysteresis and tailorable phase transition behavior supported by theoretical design

In-situ Synthesis of NiTi Shape Memory Alloys with Tunable Chemical Composition and Thermomechanical Response by Dual-Wire-feed Electron Beam Directed Energy Deposition

Damping Behavior of Tini-Based Shape Memory Alloys

Microstructure Evolution and Shape Memory Function Mechanism of NiTi Alloy by Electron Beam 4D Printing

Electron beam freeform fabrication of NiTi shape memory alloys: Crystallography, martensitic transformation, and functional response

High-strength porous NiTi shape memory alloys with stable cyclic recovery properties fabricated using elemental powders

Microstructure and properties of NiTi shape memory alloy fabricated by double-wire plasma arc additive manufacturing with a nearly equal atomic ratio

Microstructure, Phase Transformation Behavior and Tensile Superelasticity of NiTi Shape Memory Alloys Fabricated by the Wire-Based Vacuum Additive Manufacturing

Microstructures and mechanical properties of NiTi shape memory alloys fabricated by wire arc additive manufacturing

Endowing Low Fatigue for Elastocaloric Effect by Refined Hierarchical Microcomposite in Additive Manufactured NiTiCuCo Alloy

Superior tensile and recovery properties of hydride-dehydride elemental NiTi alloys homogenized using high-temperature sintering

Study on the NiTi Shape Memory Alloys In-Situ Synthesized by Dual-Wire-feed Electron Beam Additive Manufacturing

Achieving stable actuation response and elastocaloric effect in a nanocrystalline Ti50Ni40Cu10 alloy

Gradient Porosity and Large Pore Size NiTi Shape Memory Alloys

Recent Development of Bulk Ultrafine Grained TiNi-Based Shape Memory Alloys Processed by Severe Plastic Deformation