Abstract:The DPF regeneration is crucial for reducing backpressure, minimizing negative impacts on engine power and fuel economy, but the changes in particulate emission characteristics it brings are worth studying. In this study, the influence of DPFs with different soot loadings on exhaust back pressure and particle emission characteristics, as well as the particle number emission, particle size distribution, and thermal field distribution characteristics during regeneration was investigated based on engine bench test. Results reveal that the exhaust back pressure increases linearly with the engine speed, as well as the soot loading. The increase of DPF soot loading leads to a considerable increase in the reduction efficiency of particle number (PN) and particulate matter emissions, especially for the accumulation mode particles. Moreover, the performance in reducing nucleation mode particles is markedly better than that of accumulation mode ones, and this effect is greatly influenced by the engine operating conditions. At the beginning of DPF regeneration, the PN concentration increases sharply, especially the nucleation mode particles. After regeneration, the PN emissions decrease by two orders of magnitude. During regeneration, the particle size distribution exhibits a unimodal distribution, with the peak value increasing considerably and shifting toward smaller particle sizes. After regeneration, the particle size of the PN peak value slightly decreases and markedly shifts toward larger sizes, the accumulation mode particle concentration increases by 7.2 times, and the nucleation mode particle concentration increases by 2.6 times. Before the DPF regeneration, the axial temperature gradually decreases along the direction of the airflow, and the radial temperature gradually decreases from the center to the edge. During regeneration, the highest temperature occurs in the center of the DPF cross-section, whereas the temperature peak at the outlet interface occurs at the middle position of the DPF. The findings of this paper can provide scientific references to formulation and optimization of DPF regeneration strategies.

Present Status and Development Trend of the Exhaust Particulate Filter for Diesel Vehicles

Progress in Fuel Borne Catalysts for the Purification of Diesel Exhaust

Snapshots of kinesin motors on microtubule tracks.

A review of regeneration mechanism and methods for reducing soot emissions from diesel particulate filter in diesel engine

Effect of regeneration method and ash deposition on diesel particulate filter performance: a review

Non-thermal lasma assisted incineration of particulate matter

Full course evolution characteristics of DPF active regeneration under different inlet HC concentrations

Particle filter performance of soot-loaded diesel particulate filter and the effect of its regeneration on the particle number and size distribution

Study on the purification of diesel engine exhaust particles based on water film adsorption

Methodology of diesel particulate filter testing on test bed for non-road engine application

Comparison of the Use of Real Diesel Soot and Soot Surrogate in the Performance Analysis of Diesel Particulate Filters

Study on Burner Type Diesel Particulate Filter System Using Compressed Air from Turbocharger

An experimental investigation of particulate emission characteristics of catalytic diesel particulate filters during passive regeneration

Lumped model for evaluating dynamic filtration and pressure drop behaviour in diesel particulate filters

The Application of Two Closely Coupled DPFs as the After-treatment System

Experimental Study on Electrical Regeneration for Diesel Exhaust Particulate Filter

Non-derivatization approach to high-performance liquid chromatography-fluorescence detection for aminoglycoside antibiotics based on a ligand displacement reaction.

Advances in emission control of diesel vehicles in China

Comprehensive treatment strategy for diesel truck exhaust

Equipment and diesel particulate trap DPF based on accurate regeneration of DPF is realized to radio frequency technology control carbon cumulant

Physical, chemical, and cell toxicity properties of mature/aged particulate matter (PM) trapped in a diesel particulate filter (DPF) along with the results from freshly produced PM of a diesel engine