Evolution of nanoheterogeneities and correlative influence on magnetostriction in FeGa-based magnetostrictive alloys
Tingyan Jin,Hui Wang,Yijun Chen,Tao Li,Jingmin Wang,Chengbao Jiang
DOI: https://doi.org/10.1016/j.matchar.2022.111780
IF: 4.537
2022-04-01
Materials Characterization
Abstract:Enhanced magnetostriction in FeGa-based alloys has been attributed to the tetragonal modified-D03 nanoinclusions. However, the dependence of the magnetostricitive properties on the size and volume fraction of the modified-D03 phase remains unclear. Here, the morphology evolution and density change of modified-D03 nanoinclusions in (Fe81Ga19)99.9Tb0.1 single crystal were characterized by transmission electron microscopy upon in-situ heating process (298 K to 773 K), and their correlative influence on magnetostriction behavior was revealed. The morphology and density of modified-D03 nanoinclusions vary slightly when heating temperature is lower than 473 K, leading to the almost unchanged magnetostriction in (Fe81Ga19)99.9Tb0.1 alloys. When heating from 473 K to 773 K, modified-D03 nanoinclusions evolve into a band-like distribution rather than being randomly distributed in A2 matrix at lower temperature, and the magnetostrictive properties decrease with the increased size of modified-D03 nanoinclusions from ~5 nm to ~25 nm during the heating process. The decreased density of modified-D03 nanoinclusions caused by phase transition from modified-D03 to A2 results in further reduction of magnetostrictive properties when heating at 773 K. The magnetostriction of (Fe81Ga19)99.9Tb0.1 single crystal can recover to 325 ppm by quenching from 973 K, which results from the re-precipitation of modified-D03 nanoinclusions with small size. The results provide a basis for optimizing the magnetostrictive performance of Fe81Ga19(Tb) alloys. The enhanced magnetostriction of Fe81Ga19(Tb) alloys could be obtained by quenching from temperature higher than 773 K.
materials science, multidisciplinary,metallurgy & metallurgical engineering, characterization & testing