Abstract:Sandy water sources are widely distributed and are important for agricultural development. However, no explicit result has been achieved in the research of the accuracy and reliability of pipeline metering devices as well as flow rate measurement objects (water or water–sand) of different metering devices in the process of pipelines conveying muddy water. In this study, seven kinds of sediment concentration gradients, C0–C6 (0.2–7.19%), and three different flow velocities (1.0 m/s, 1.25 m/s, 1.5 m/s) were set up, and a comparison measuring method was used to compare the flow values of three kinds of metering device (electromagnetic flowmeter, ultrasonic flowmeter and water meter) with a right triangle weir. The accuracy and reliability of the metering device were obtained by analyzing the change law of the relative error between each metering device and the right triangle weir under different flow velocities and different sediment concentrations, and the flow rate measurement objects of each metering device were finally clarified. The relative error between the electromagnetic flowmeter and right triangle weir decreased gradually with the increase in the flow velocity when the sediment concentration was constant. The maximum difference of the relative error between the electromagnetic flowmeter and the right triangle weir was 2.53% when the flow velocity was constant. Additionally, the minimum differences of the relative errors of the ultrasonic flowmeter and water meter were 2.67% and 6.90%, respectively. The measured flow law of the electromagnetic flowmeter was more in line with the measured flow law of the water–sand mixture measured by the right triangle weir. However, the relative errors of water and water–sand measured by the ultrasonic flowmeter and water meter fluctuate greatly, which does not accord with the law of muddy water measured by the right triangle weir. The results showed that the electromagnetic flowmeter has the best reliability among the three metering devices, and the accuracy can be improved by calibration before use or increasing the flow velocity of the pipe network. Under the sand grading used in this study, the electromagnetic flowmeter was recommended to measure the flow rate of pipe irrigation for sandy water sources in this paper.

Calibration and analysis to Measurement Accuracy of the Flumegate

Study of No-liquid Calibration Technique for the Medium-and-large Diameter Electromagnetic Flowmeter

Impact Of Two Calibration Strategies On Flow Simulation In Qiantang River Basin, China

Comparison of Design and Selection of Standard Parshall Flume in Sewage Treatment Plant

Dry Calibration Technique of Electromagnetic Flowmeters

Hydraulic characteristics and flow measurement performance of portable primary and subsidiary fish-shaped flumes in U-shaped channels

Experimental Study and Flow Analysis on a New Design of Water-Retaining Sluice Gate

Experimental Study of Simple Flumes with Converging Triangular Walls

Accuracy and Reliability Analysis of Pipe Irrigation Metering Device for Sandy Water Source

Calibration of Runoff-Conflux Model Integrated and Application to Flood Forecast

Assessment of Water Quality Based- on Ultrafiltration Membrane Flux Measurement

Water Flux Characterization Through Hydraulic Head and Temperature Data Assimilation: Numerical Modeling and Sandbox Experiments

Three-dimensional Numerical Analysis on a New Design of Hydraulic Structure for Water Treatment

Improvement Of The Calculation Of The Amount Of Water And Sediment Discharge At Weirs With A New Integral Equation Method

Performance evaluation of a nonstandard Parshall flume and comparison of experimental techniques for its verification in a drinking water treatment plant

Correction Method of Flowrate Measured in Polymer Flooding Injection Well and Its Application

Design of a Flow Automatic Calibration System Based on the Master Meter and Dynamic Weighing Methods

A Discharge Measurement Method for Open Channels with Regular Sections

Improvement of the Calculation Accuracy about the Amount of Water Discharge Using an Integral Equation in Hydrological Experiments

Conductance Sensor With Self-Calibration and Venturi Tube Based Flowrate Measurement for Gas–Water Slug Flow

Experimental and numerical study on wet steam flow metering overreading characteristics in venturi tube