Abstract:Herein, the interfacial compound growth kinetics and corresponding mechanisms in Sn-0.7Cu/Cu solder joint at aging stage were investigated using both experiments and molecular dynamics simulations. The research results indicate that, the growth rates of interfacial IMCs (Cu6Sn5 IMC and Cu3Sn IMC) are affected by the aging temperature severely, the higher aging temperature leads to the larger growth kinetics for both Cu6Sn5 IMC and Cu3Sn IMC. At aging stage, Cu substrate continuously supplies Cu3Sn IMC with Cu atoms. Those Cu atoms diffuse across Cu3Sn IMC to the Cu3Sn/Cu6Sn5 interface and react with Sn atoms diffused from the Sn-based solder to form new Cu3Sn grains growing towards Cu6Sn5 IMC, and the main crystal orientations are (100), (42–1), and (3−10). As the grain boundary diffusion rate of Cu atoms in Cu3Sn IMC determines the CuSn reaction rate (new Cu3Sn grains formation rate) on Cu3Sn/Cu6Sn5 interface, the growth of Cu3Sn IMC is driven by grain boundary diffusion, which is manifested by a growth index n near to 0.3. Meanwhile, the rod-like Cu6Sn5 IMC preferentially grows into Sn-based solder attributed to the large number of Cu atoms provided by Cu3Sn IMC, which can diffuse to the top of Cu6Sn5 IMC and reacts with Sn-based solder. While when Cu6Sn5 IMC is thick enough, Cu atoms cannot reach to the top of Cu6Sn5 IMC anymore, but diffuse laterally within the Cu6Sn5 grains, resulting in the widening of scallop-like Cu6Sn5 IMCs. As the thickening of Cu6Sn5 IMC is caused by the growth of the existing Cu6Sn5 grains, the diffusion of Cu and Sn atoms in Cu6Sn5 grains plays a decisive role. Therefore, the growth of Cu6Sn5 IMC is driven by bulk diffusion, which is manifested by a growth index n near to 0.5.

Interfacial Microstructures of Sn3.8Ag0.7Cu and Sn37Pb Joints

Aging Interfacial Structure and Abnormal Tensile Strength of SnAg3Cu0.5/Cu Solder Joints

In situ quantitative study of microstructural evolution at the interface of Sn3.0Ag0.5Cu/Cu solder joint during solid state aging

Microstructural evolution of Cu–Sn–Ni compounds in full intermetallic micro-joint and in situ micro-bending test

Formation and Growth of Intermetallic Compounds of Sn-2Ag-2.5Zn on Cu and Ni Substrates

Microstructure evolution and mechanical properties of Sn-3.5Ag-1.0Zn/Cu joint

Morphologies and Evolution of Intermetallic Compounds Formed Between Sn1.0Ag0.7Cu Composite Solder and Cu Substrate

Morphologies and grain orientations of CuSn intermetallic compounds in Sn3.0Ag0.5Cu/Cu solder joints

Intermetallic compound evolution and mechanical properties of Cu/Sn58Bi/Cu 3D structures blended with B 4 C nanoparticles during isothermal aging

Solid-state Interfacial Reaction of Eutectic Sn3.5Ag and Pure Tin Solders with Polycrystalline Cu Substrate

IMC Growth at the Interface of Sn–2.0Ag–2.5Zn Solder Joints with Cu, Ni, and Ni–W Substrates

Microstructure of Sn-3.5Ag-0. 5Cu/Cu interface

Interfacial Reaction and IMCs Growth Behavior of Sn3Ag0.5Cu/Ni Solder Bump During Aging at Various Temperatures

The In-Situ TEM Isothermal Aging Evolution in a μ-Cu/NiAu/Sn/Cu Solder Joint for Full Intermetallic Compounds Interconnects of Flexible Electronics

Interfacial transfer and phase evolution between Cu and Sn solder doped with minor Cu, Ag and Ni: experimental and theoretical investigations

Influence of Ag content on the formation and growth of intermetallic compounds in Sn–Ag–Cu solder

Cu aggregation behavior on interfacial reaction of Sn-3.0Ag-0.5Cu/ENIG solder joints

Microstructure evolution and growth kinetics of intermetallic compound in SAC305/Ag and SAC305/Cu solder joints during solid-state aging

Study on low-Ag content Sn-Ag-Zn/Cu solder joints.

Investigation on interfacial compound growth kinetics in Sn-0.7Cu/Cu solder joint and mechanism analysis: Experiments and molecular dynamics simulations

Effect of Cu diffusion through Ni on the interfacial reactions of Sn3.5Ag0.75Cu and SnPb solders with Au/Ni/Cu substrate during aging