Abstract:In order to avoid disk failure to cause uncontained accidents, the containment capability of cylindrical case to the disk frgments must experimentally be investigated, and the impact, deformation, penetration or perforation of the case must be studied in detail. The results of three containment tests of disk fragments were proposed by the ZUST1 high-speed rotor spin testing facility in High-speed Rotating Machinery Laboratory of Zhejiang University. Before testing, the prefabricating cracks were cut at three positions separated in 120° to make the disk cracked at the predicted speed; a special automatic control and monitor system was used to record the instantaneous rotating speed as the disk was bursted. The tested results show that, when the disk fragments impact the cylindrical case of the different wall thicknesses at the same instantaneous speed, the different failure modes of the case occur obviously, in which the failure modes of the thin wall case are shearing, tensioning and plastic deformation, the mode of the thick is whole plastic deformation. The numerical simulations were correspondingly carried out using the nonlinear finite element method MSC. Dytran to study the impact process and failure mode. The simulated results show a good agreement with the test results, which indicates that nonlinear finite element method can be used as a reliable tool for containment structure design of disk fragments.

Containment of High-Speed Rotating Disk Fragments

Penetration of Disk Fragments Following Impact on Thin Plate

Containment Ability and Groove Depth Design of U Type Protection Ring

Experimental study of cylindrical case impacted by disk fragments

Containment Tests and Analysis of Soft Wall Casing Fabricated by Wrapping Kevlar Fabric Around Thin Metal Ring

Simulation Methodology Development for Rotating Blade Containment Analysis

Numerical simulation of the disk fragment impacting resistance of plate target

Containment Capability of 2D Triaxial Braided Tape Wound Composite Casing for Aero‐engine

Characteristics and mechanisms of turboshaft engine axial compressor casing containment

Ballistic testing and theoretical analysis for perforation mechanism of the fan casing and fragmentation of the released blade

NUMERICAL SIMULATION OF A THIN PLATE IMPACTED BY BLADE PROJECTILE

Dynamic Response Characteristics and Damage Modes of Multifunctional Layered Hydrogen Storage Vessels under Impact Loads

Review of Aero-Engine Case Containment Research

Adiabatic Shear Fractures and Fragments of Cylindrical Structures under Internal Explosive Loading

Multi-Blade Effects on Aero-Engine Blade Containment

Research on Centrifugal Compressor Disk Containment of Auxiliary Power Unit

Experimental study of real casing containment

Perforation of aero-engine fan casing by a single rotating blade

Aeroengine turbine blade containment tests using high-speed rotor spin testing facility

INVESTIGATION ON BLADE CONTAINMENT OF AERO-ENGINE COMPOSITE CASE

Experimental Study and Numerical Simulation of Model Casing Containment