Grain size dependent microstructure and texture evolution during dynamic deformation of nanocrystalline face-centered cubic materials
Heng Li,Tianju Chen,Weilin Li,Hualei Zhang,Shuang Han,Caizhi Zhou,Zibin Chen,Emmanuel A. Flores-Johnson,Luming Shen,Jianshe Lian,Irene J. Beyerlein,Xiaozhou Liao
DOI: https://doi.org/10.1016/j.actamat.2021.117088
IF: 9.4
2021-09-01
Acta Materialia
Abstract:<p>Evolution of microstructure and texture in nanocrystalline (nc) face-centered cubic materials subjected to high-strain-rate compression are investigated. Three nc materials, differing in grain size or stacking fault energy, namely, 27 nm Ni, 70 nm Ni, and a 27 nm NiCo alloy are deformed under high strain rates (8000-23000 s<sup>−1</sup>) using the split-Hopkinson pressure bar technique. The transmission Kikuchi diffraction technique and discrete-crystal plasticity finite element (D-CPFE) simulations are used to evaluate the structural evolution. Experimental results show that grain growth and grain refinement occurred in samples with small and large initial grain sizes, respectively, while all deformed materials evolve to (110) texture. The D-CPFE simulations, built for grain size dependent nc deformation with no fitting parameters, reveal that partial dislocation slip induced faster texture evolution than full dislocation slip. Comparison between experimental and simulation results suggests that the (110) texture is mainly induced by combined full and partial dislocation slip in the 27 nm and 70 nm Ni samples, and by partial dislocation slip alone in the NiCo alloy. Deformation twinning made almost no contributions to the observed texture evolution. Grain-boundary-mediated deformation facilitates grain coarsening, while partial dislocation activities help to induce dynamic stabilization and further refinement of the nano-grains. The highly coupled evolution of microstructure and texture during dynamic deformation is mainly controlled by synergetic grain-size and strain-rate effects.</p>
materials science, multidisciplinary,metallurgy & metallurgical engineering