Abstract:Consideration of a core and mantle configuration for individual grains is a prominent method to capture the grain size-dependence in the constitutive models for polycrystal material. The mantle represents a region of the grain volume near the grain boundary where mechanical deformation is influenced by the grain boundaries, while the core represents the inner region of the grain volume. The grain size-dependence is then realized by assigning a set of values for the mechanical properties in the mantle that are different from those of the core region. However, these values for the mechanical properties of the mantle region are typically chosen arbitrarily, guided solely by the quality of the agreement between a model's predicted stress-strain behavior with that obtained experimentally. In the present study, a physics-based method to develop the grain size-dependent crystal plasticity constitutive model on the core and mantle configuration for polycrystal materials is presented. The method is based on the assumption that any resistance to dislocation nucleation and motion in a material manifests as an increase in yield strength and a decrease in strain-hardening modulus, and the mutual relationship between yield strength and strain-hardening is an inherent material property that determines the plasticity of that specific material. Accordingly, the same single crystal plasticity constitutive model that describes the behavior of the material under loading can be used to capture the increased resistance to dislocation nucleation and motion in the grain boundary influence region. The physics-based modeling is facilitated by introducing a shear flow strain distribution in the phenomenological formulation and a pile-up of dislocation density distribution in the dislocation based formulation, such that, the resulting variations in the yield strength and the strain-hardening modulus are identical to that produced by the increased resistance in the grain boundary influence region. Thus, the increase in strength and the decrease in the strain-hardening modulus, determined as spatially varying local material properties in the mantle, are mutually related through the grain size-independent inherent plastic properties specific to the material. A simplified model that considers the grain boundary effect averaged over the grain volume is also developed under this general framework. Implementation of this simplified model is demonstrated by considering the case of a power law flow rule and a hyperbolic-secant hardening rule for the phenomenological formulation, and Taylor strength relation for the dislocation based formulation. Finally, the grain size-dependent constitutive model is validated by comparing the predicted stress-strain behavior of polycrystal copper samples under uniaxial loading with experimental results.

Constitutive Modeling of Aggregates with Evolving Inextensible Constraints

Nonlinear evolution of aggregates with inextensible constraints

A Constitutive Model for Strain Hardening Behavior of Predeformed Amorphous Polymers: Incorporating Dissipative Dynamics of Molecular Orientation

A finite strain micromechanical-based constitutive model: Application to porous polycrystal

A micromechanical model of texture induced orthotropy in planar crystalline polymers

Grain size-dependent crystal plasticity constitutive model for polycrystal materials

Thermomechanical Modeling of Microstructure Evolution Caused by Strain-Induced Crystallization

Modeling the Rate-Dependent Ductile-Brittle Transition in Amorphous Polymers

Simulation of Crack Tip Superblunting in Semi-Crystalline Polymers

Constitutive modeling of structured granular materials with anisotropic grain skeleton and cement bonds

Modeling on strain softening and Portevin-Le Chatelier effect in crystalline materials based on mesoplasticity

A new constitutive model for tetragonal energetic single crystals

Constitutive modeling for nanocrystalline metals based on cooperative grain boundary mechanisms

A viscoelastoplastic constitutive model of semi-crystalline polymers under dynamic compressive loading: Application to PE and PA66

Polycrystal Simulation of Texture-Induced Grain Coarsening during Severe Plastic Deformation

An intermolecular interaction based constitutive model for non-crystalline phase of solid materials

A thermodynamically-based constitutive theory for amorphous glassy polymers at finite deformations

A Constitutive Framework for Micro-to-macroplasticity of Crystalline Materials under Monotonic and Cyclic Deformation

Constitutive modeling of deformation behavior of high-entropy alloys with face-centered cubic crystal structure

A physically-based constitutive model for amorphous glassy polymers in large deformations

A continuous phase-evolution model for cold and strain-induced crystallization in semi-crystalline polymers