The Application of CAD Technique in Mechanical Drawing

MENG Li-dong

2007-01-01

Abstract:Based on the practice of Shanxi 115 Coal Geotechnical Institute in the application of CAD technique, this paper expounds the necessity of popularizing CAD technique in the tool repairing, and puts forward some problems existing in the application of CAD technique and solving methods.

What problem does this paper attempt to address?

Application of Computerized Tomography on Geotechnical Engineering Study

Lu-jun WANG,Yong-zhen ZUO,Xian-yong KONG,Zhi-qiang WANG

DOI: https://doi.org/10.3969/j.issn.1673-0836.2009.z2.069

2009-01-01

Abstract:The basic principles of CT are briefly discussed.Compared with SEM and AE methods,the applicability of CT on Geotechnical Engineering study is confirmed.Today,the application of CT in Geotechnical Engineering lies in: the evolution process of rock crack under loading,the change of soilmass structure,study of the macropores of soilmass,the change of silty clay before and after dynamic triaxial test and Real-time CT test in frozen soil.
Applications of Computer-Aided Engineering(CAE) in Chemical Machinery

Shuiguang Tong

2005-01-01

Abstract:The concept of CAE and some major softwares suitable for chemical machinery were presented.The applications of CAE in chemical machinery at home and abroad were analyzed,and an application sample was given.
The application of CAD in mechanical design

Li Qi

Abstract:With the rapid development of electronic technology and machinery manufacturing, CAD technology has been widely applied, especially in the application of mechanical design, people gradually pay attention to the importance of CAD of mechanical design. Application of CAD technology in mechanical product design, system analyzes the advantages and disadvantages of CAD technology in mechanical design, as well as relevant improvement measures,summarized the development trend of CAD.

Computer Science,Engineering
Application of CAD Technology in Building Decoration Construction

Yingying Shao

DOI: https://doi.org/10.26689/jard.v5i5.2516

2021-09-28

Journal of Architectural Research and Development

Abstract:With the rapid development of science and technology, the application scope of computer technology and related software is expanding, while improving the work efficiency of various industries, the quality of people’s work has also been greatly improved. In particular, as an important part of China’s economic development, the construction industry has gradually applied some new technical means, and achieved remarkable application results. CAD technology drawing can not only improve the standardization of scheme design, but also effectively shorten the time, which is of great significance to the improvement of construction quality. This paper focuses on the application of computer technology (CAD) in the construction of building decoration, and hopes to provide reference and suggestions for relevant personnel.
Discusson on Application of CAD Technology in Mechanical Design

Ma Jun

Abstract:CAD has brought new revolution,for mechanical manufacturing industry.It not only improves the precision of product design,but also make product development cycle shorter,so as to create efficient and safe products.This paper shows the importance of CAD from its development situation,it take the CAD in the reverse engineering and the design of automobile covering mould for example,discusses the CAD in mechanical design of the application.

Engineering
The thinking and practice of engineering drawing CAI

Wang Jianhua,Hao Yuxin,Liu Lingtao

DOI: https://doi.org/10.3969/j.issn.2095-302X.2012.06.019

2012-01-01

Abstract:With the rapid progress of computer technology and the teaching reform in engineering drawing,Computer Aided Instruction(CAI) has become one of the most important modern teaching methods.Its' application in the classroom teaching has begun to receive attention widely.By analyzing the advantages and disadvantages of the practice of Engineering drawing CAI,this paper gives some ideas about how to use CAI effectively.
An Effective Method and Its Implementation for Automatic Extraction of Part Information from Engineering Drawings

HU Min,JIANG Xiao-Hong,SHI Jiao-Ying

DOI: https://doi.org/10.3321/j.issn:1003-9775.2000.10.012

2000-01-01

Journal of Computer-Aided Design & Computer Graphics

Abstract:In order to reuse the CAD data efficiently, the paper presents an effective method for extracting mechanical part information from existing mechanical engineering drawings produced by CAD software. Characteristics of the forms in the engineering drawings are analyzed. A new method to represent arbitrary forms with matrix is proposed, which makes it easy to extract form frames. Based on the form frames, the part information is obtained. In addition, a practical software tool is briefly introduced, which can be used to extract part information from AutoCAD produced engineering drawings automatically.
APPLICATION OF COMPUTER GRAPH TECHNOLOGY IN CIVIL ENGINEERING CAD

Qi Shi

1990-01-01

Abstract:The graph system DITCAD in the civil engineering is introduced in thispaper.We use relational database to store and manage graphical data.Using theinteractive graph editon,the graph could be modified.As peripheral equipments couldbe lonnected to the system though interface files,the system DITCAD the betteradaptability.
Dimension Technology in CAD System of Plain Bearing of Internal Combustion Engine

TAN Ye-qin,LI Zhu-guo

DOI: https://doi.org/10.3969/j.issn.1000-0925.2005.02.022

2005-01-01

Abstract:It is a difficult problem to dimension drawings in the CAD system of the plain bearing of internal combustion engines. The method discussed in this article deals with the dimension problem well, including realizing the initialization of the program in AutoCAD, the public functions of the dimension and the application of these functions. The drawings out from this CAD system will be clearer and accord with the standard better.
To Reform the Teaching Method of the Mechanical Drawing with SolidWorks and AutoCAD

Xu Yunfe

Abstract:With computer-aided design software widely used in engineering practice, traditional mechanical drawing teaching methods are obvious shortcomings in the effect of the culture of reading and drawing mechanical drawings, such as teaching by physical model or drawing exercises with tools. In this paper, the course hours of mechanical drawing is redistributed, then SolidWorks and AutoCAD computer-aided design software is integrated into the course teaching practice, so students' ability of manual drawing and computer graphics is dual-trained and students' learning enthusiasm and initiative are fully mobilized. Using this flexible teaching mode, teaching and learning are much easier, good teaching effect has gotten.

Computer Science,Engineering
Application of CAD Secondary Development Technology in the 3D Parametric Design of Mechanical Parts

Ming-Wei Lu

DOI: https://doi.org/10.4028/www.scientific.net/AMM.246-247.1251

2012-12-01

Abstract:This paper mainly studies the technology of computer aided design in mechanical design application. In the three-dimensional spring parametrization design as an example, introduced the use of AutoCAD embedded Visual LISP development tools for3D parametric graphic design principles, processes and methods, introduction of computer aided design technology, reduces the design personnel repetitive drawing work, improve the efficiency of design.

Computer Science,Engineering
Application of Graphical Method for Measurement Data Processing Based on CAD

Feng Yanqin,Wen Shengjie,Zhang Wenjun

2008-01-01

Abstract:With various changes of engineering design in plane and space,construction measurement and positioning is more complicated.It is very difficult to take design positioning rapidly and correctly during the construction.Graphical method based on CAD is used for measurement data processing,instead of manual calculation.Graphical method based on CAD may improve the efficiency of data processing and data precision.The solution of graphical method based on CAD is introduced in detail,including establishing measurement coordinate, drawing engineering plane graph,positioning,measurement data processing,and measurement data arrangement.Based on practical projects,the application of graphical method is also present.
Research on Development Methods and Application of CAD System of Prac Tical Sheet Metal Expansion

Yan Luo

2004-01-01

Abstract:On the basis of analyzing expansion calculation of sheet metal and met hods of drawing, the system and developed methods are detailedly discussed on CA D of practical sheet metal expansion. And it is systematically explained how to do expansion calculation of sheet metal parts, automatically draw its unfold dra wing and make relative data files of expansion calculation by using geometry, ma thematics, computer aided design and AutoCAD system. At present, the method has been successfully used to develop CAD system of sheet metal expansion.
Research and Application of Foundry CAD/CAE System

朱昌盛,安国升,王智平,刘致远

DOI: https://doi.org/10.3969/j.issn.1003-5311.2009.08.027

2009-01-01

Abstract:In this paper,the three-dimensional model contained foundry technical information is created by Pro/E software,and then the numerical simulation of solidification process is carried out based on MAGMAsoft,so that the verification and optimization of technical design can be achieved. According to the simulation results,the reasons of casting defects can be found,and by modifying the processing parameters,the process can be optimized and improved. Finally,a reasonable technology program can be brought forward.
APPLICATION OF CAD SOFTWARE IN 3D MODELING OF ENGINEERING GEOLOGY

XU Wenjie,HU Ruilin,LI Houen,LI Xinhua,LI Zhuangju

DOI: https://doi.org/10.3969/j.issn.1004-9665.2007.02.025

2007-01-01

Journal of Engineering Geology

Abstract:How to build the three dimensional model of the geologic body quickly and truly is a difficult problem which lies in the front of the numerical simulation operators. Although the three-dimensional (3D) geoscience simulation software has good 3D geological modelling ability, it can be difficult to join the corresponding geological model established by 3D study simulation software with numerical simulation software because of the difference in data structures. A majority of CAD software have good data connection with the present numerical analysis software. This paper presents a study on how to use CAD software to establish 3D geological model for 3D visualization and numerical simulation purposes. The 3D modeling of some highway slopes in Yunnan is used an examples to illustrate this approach is convenient, accurate and reasonable.
Using AutoCAD Software to Assist in Analyzing the Application of Modern Machinery Manufacturing Technology and Processing Technology

Hai Wei

DOI: https://doi.org/10.1088/1742-6596/1648/2/022071

2020-10-01

Journal of Physics: Conference Series

Abstract:Abstract With the renewal and development of modern mechanical manufacturing technology, traditional mechanical manufacturing technology cannot meet the needs of the industry. To promote the development of modern mechanical processing industry, we need to continuously improve the level of mechanical manufacturing technology and processing technology. AutoCAD software, as a computer-aided software, is often used for two-dimensional drawing and basic three-dimensional design. It is widely used in modern machinery manufacturing and processing. This paper first introduces the characteristics of modern mechanical manufacturing technology and processing technology, and then uses AutoCAD software to assist in analyzing the current situation and practical application of modern mechanical manufacturing technology and processing technology.
Discussion on Characteristics and Application of Casting Technique Auto CAD

Wang Enlu

DOI: https://doi.org/10.3969/j.issn.1006-4311.2011.06.044

2011-01-01

Abstract:Auto CAD is the entire process work from casting parts diagram input to process map output,including sub-surface casting,machining allowance,taper angle,core head,pouring system,riser,and a variety of design technology symbols.This paper introduces the characteristics of Auto CAD,and then analyzes the characteristics and application of Auto CAD casting process,and finally a case study is given with some reference value.
Emergence and development of computer aided design

Hui-zhu LIN,Cun-chen DU,Fang WU

DOI: https://doi.org/10.3969/j.issn.1006-7906.2001.02.014

2001-01-01

Abstract:The emerging background，development and wide application of computer aided design（CAD） were introduced．It was pointed out that the CAD technology inland has a long way to go compared with the advanced technology abroad，and the practical demands and feasibility of technology and economic should be considered in setting up CAD system．
Study of Tile Autogeneration Technique of 2D Engineering Drawings of Gear Based on AutoCAD

ZHANG Mingyong,YANG Bo

DOI: https://doi.org/10.3969/j.issn.1001-3881.2011.04.003

2011-01-01

Abstract:Key technique and implementation method for autogeneration of 2D engineering drawings of gear based on AutoCAD were studied in order to overcome low efficiency in design during changing of gear parts.An automatic gear design system was established by introducing parameterized design and drawing methodology,as well as ObjectARX based secondary development of AutoCAD into the procedure of gear design.The modulus of gear,number of teeth,corresponding sizes of the structure and other design results could be automatically generated by the system according to recorded parameters of design,and two-dimensional engineering drawing could be generated automatically driven by the sizes.A fast and automatic design of gear is realized.
Teaching Analysis of Auto CAD Drawing Skills

Yongsheng Zhou

2009-01-01

Abstract:The author explores and concludes some practical tips for improving the drawing efficiency in the process of teaching Auto CAD drawing.This article mainly describes methods how to use Auto CAD skills,including the ones of the relative coordinate method to capture,shape and position tolerances of the revision of mapping aids and commands of the text model setting,point dash,block,etc.to improve the drawing process.

The Application of CAD Technique in Mechanical Drawing

Application of Computerized Tomography on Geotechnical Engineering Study

Applications of Computer-Aided Engineering(CAE) in Chemical Machinery

The application of CAD in mechanical design

Application of CAD Technology in Building Decoration Construction

Discusson on Application of CAD Technology in Mechanical Design

The thinking and practice of engineering drawing CAI

An Effective Method and Its Implementation for Automatic Extraction of Part Information from Engineering Drawings

APPLICATION OF COMPUTER GRAPH TECHNOLOGY IN CIVIL ENGINEERING CAD

Dimension Technology in CAD System of Plain Bearing of Internal Combustion Engine

To Reform the Teaching Method of the Mechanical Drawing with SolidWorks and AutoCAD

Application of CAD Secondary Development Technology in the 3D Parametric Design of Mechanical Parts

Application of Graphical Method for Measurement Data Processing Based on CAD

Research on Development Methods and Application of CAD System of Prac Tical Sheet Metal Expansion

Research and Application of Foundry CAD/CAE System

APPLICATION OF CAD SOFTWARE IN 3D MODELING OF ENGINEERING GEOLOGY

Using AutoCAD Software to Assist in Analyzing the Application of Modern Machinery Manufacturing Technology and Processing Technology

Discussion on Characteristics and Application of Casting Technique Auto CAD

Emergence and development of computer aided design

Study of Tile Autogeneration Technique of 2D Engineering Drawings of Gear Based on AutoCAD

Teaching Analysis of Auto CAD Drawing Skills