APPLICATION OF COMPUTER GRAPH TECHNOLOGY IN CIVIL ENGINEERING CAD

Qi Shi

1990-01-01

Abstract:The graph system DITCAD in the civil engineering is introduced in thispaper.We use relational database to store and manage graphical data.Using theinteractive graph editon,the graph could be modified.As peripheral equipments couldbe lonnected to the system though interface files,the system DITCAD the betteradaptability.

What problem does this paper attempt to address?

Research on Technologies of Computer Aided Sketching Design

FANG Guisheng,HE Lili,KONG Fansheng

DOI: https://doi.org/10.3969/j.issn.1000-3428.2006.18.001

2006-01-01

Abstract:Combining the flexibility and ease of use of paper and pencil with the processing power of the computer, computer aided sketching design(CASD) technology specially suits for conceptual design and can help designer write down design ideas rapidly. For many years it has been one of the key issues on which many specialists and scholars have research. Based on application domains of sketching technology, the present situation of CASD is introduced. From four aspects of CASD, that is user interface design, low level sketch process, high level sketch interpretation, 3D sketching modeling, research method of some key technologies of CASD are analyzed. The development tendency of CASD is predicted.
Applications of Computer-Aided Engineering(CAE) in Chemical Machinery

Shuiguang Tong

2005-01-01

Abstract:The concept of CAE and some major softwares suitable for chemical machinery were presented.The applications of CAE in chemical machinery at home and abroad were analyzed,and an application sample was given.
Application of Graphical Method for Measurement Data Processing Based on CAD

Feng Yanqin,Wen Shengjie,Zhang Wenjun

2008-01-01

Abstract:With various changes of engineering design in plane and space,construction measurement and positioning is more complicated.It is very difficult to take design positioning rapidly and correctly during the construction.Graphical method based on CAD is used for measurement data processing,instead of manual calculation.Graphical method based on CAD may improve the efficiency of data processing and data precision.The solution of graphical method based on CAD is introduced in detail,including establishing measurement coordinate, drawing engineering plane graph,positioning,measurement data processing,and measurement data arrangement.Based on practical projects,the application of graphical method is also present.
Graphic Marking System Based on Autodesk DWF Viewer

XU Yang,ZHONG Wei,TONG Shuiguang

DOI: https://doi.org/10.3969/j.issn.1000-3428.2007.02.080

2007-01-01

Abstract:This paper introduces the research of a general engineering information graphic marking system.Using object-oriented technology,a system model is build and described by unified modeling language,then,the graph transformation problem is resolved and an applied instance based on the control of Autodesk DWF viewer is provided.The technology can be widely used in the pos-processing function of engineering calculation software.
A New Technology of the Integration of a CAD System with a Variety of CAPP Systems

刘乃若,朱瑞清,李善平

DOI: https://doi.org/10.3969/j.issn.1000-3428.2000.08.033

2000-01-01

Abstract:This paper proposes a method of the integration of CAD/CAPP. which is used to integrate a feature based CAD system with a variety of CAPP systems by supporting the data structure defined by CAPP. The method's kernel idea is a CAPP feature's tree. The method is employed by a STEP application. In the end. an applied example is presented.
Application Research of Three-Dimensional Technology Aided Design of New Pipe Inserting into Underground Pipe

Tao WANG,Yi ZHANG,Ying XU

DOI: https://doi.org/10.3969/j.issn.1673-6338.2014.05.015

2014-01-01

Abstract:A method based on three-dimensional technology to aided design of new pipe inserting into underground water supply and drainage pipe has been researched on. Because of its distinct curvature and multiple distortions, the spatial model is very complex, so the general three-dimensional pipe design software can’ t be used in this pro-ject. The unreliability will be existed if the planar design is on the basis of the profile diagram. Therefore, the com-puter three-dimensional graphics technology can be a feasible solution to this problem. The maximum diameter of new pipe is obtained by using the three-dimensional object collision detection. Three-dimensional arc fitting based on spherical linear quaternion interpolation was adopted and three-dimensional modeling of complex pipe was real-ized. The adopted object collision detection algorithm based on triangle unit is simple and applicative. A modeling and collision demonstration software based on OpenSceneGraph three-dimensional engineer was developed to in-spect and verify a design project, the correctness of the method was confirmed by the result.
The Application of CAD Technique in Mechanical Drawing

MENG Li-dong

2007-01-01

Abstract:Based on the practice of Shanxi 115 Coal Geotechnical Institute in the application of CAD technique, this paper expounds the necessity of popularizing CAD technique in the tool repairing, and puts forward some problems existing in the application of CAD technique and solving methods.
Application of CAD Technology in Building Decoration Construction

Yingying Shao

DOI: https://doi.org/10.26689/jard.v5i5.2516

2021-09-28

Journal of Architectural Research and Development

Abstract:With the rapid development of science and technology, the application scope of computer technology and related software is expanding, while improving the work efficiency of various industries, the quality of people’s work has also been greatly improved. In particular, as an important part of China’s economic development, the construction industry has gradually applied some new technical means, and achieved remarkable application results. CAD technology drawing can not only improve the standardization of scheme design, but also effectively shorten the time, which is of great significance to the improvement of construction quality. This paper focuses on the application of computer technology (CAD) in the construction of building decoration, and hopes to provide reference and suggestions for relevant personnel.
Application Research of Civil Engineering Construction Based on Computer Aided Design Technology

Xiu Fang,Rong Tang

DOI: https://doi.org/10.1088/1742-6596/1574/1/012048

2020-06-01

Journal of Physics: Conference Series

Abstract:Abstract Information technology makes the social development experienced another major change almost covered and penetrated into all walks of life. Civil engineering design, along with its main features: large engineering design; Heavy computation; Long design cycle; High labor intensity. Information technology in the civil engineering design development, and gradually produced a variety of computer-aided design technology, successfully solved the difficulties, making the civil engineering design difficulty greatly reduced. It can be seen that the development of information technology has brought immeasurable benefits to the society, so how to further apply information technology to civil engineering and bring huge benefits to civil engineering has become the focus of today’s research.
Application of Layer Technique in Jacquard CAD System

Shijian CAO,Zhen FAN,Senlin ZHANG

DOI: https://doi.org/10.3321/j.issn:0253-9721.2007.08.029

IF: 2.3

2007-01-01

Textile Research Journal

Abstract:In the traditional jacquard CAD system,image can be processed only on one layer.In order to enhance the system ability of processing images and increase the efficiency of designing,this paper applies layer technique in jacquard CAD system,and vector map editing and mathematical morphology method fit for the jacquard CAD field are used at the same time.A jacquard CAD image processing system based on the layer technique is finally designed.The system is programmed in Delphi 7.System architecture,implementation principle of each module and core algorithm are introduced.Through the above methods,good effect is gained at last,which demonstrates that this technique has broad prospects for application.
The application of CAD in mechanical design

Li Qi

Abstract:With the rapid development of electronic technology and machinery manufacturing, CAD technology has been widely applied, especially in the application of mechanical design, people gradually pay attention to the importance of CAD of mechanical design. Application of CAD technology in mechanical product design, system analyzes the advantages and disadvantages of CAD technology in mechanical design, as well as relevant improvement measures,summarized the development trend of CAD.

Computer Science,Engineering
The thinking and practice of engineering drawing CAI

Wang Jianhua,Hao Yuxin,Liu Lingtao

DOI: https://doi.org/10.3969/j.issn.2095-302X.2012.06.019

2012-01-01

Abstract:With the rapid progress of computer technology and the teaching reform in engineering drawing,Computer Aided Instruction(CAI) has become one of the most important modern teaching methods.Its' application in the classroom teaching has begun to receive attention widely.By analyzing the advantages and disadvantages of the practice of Engineering drawing CAI,this paper gives some ideas about how to use CAI effectively.
APPLICATION OF CAD SOFTWARE IN 3D MODELING OF ENGINEERING GEOLOGY

XU Wenjie,HU Ruilin,LI Houen,LI Xinhua,LI Zhuangju

DOI: https://doi.org/10.3969/j.issn.1004-9665.2007.02.025

2007-01-01

Journal of Engineering Geology

Abstract:How to build the three dimensional model of the geologic body quickly and truly is a difficult problem which lies in the front of the numerical simulation operators. Although the three-dimensional (3D) geoscience simulation software has good 3D geological modelling ability, it can be difficult to join the corresponding geological model established by 3D study simulation software with numerical simulation software because of the difference in data structures. A majority of CAD software have good data connection with the present numerical analysis software. This paper presents a study on how to use CAD software to establish 3D geological model for 3D visualization and numerical simulation purposes. The 3D modeling of some highway slopes in Yunnan is used an examples to illustrate this approach is convenient, accurate and reasonable.
Research on the Application of Computer Intelligent Detection in Civil Engineering Technology

Chunzhi Zhao,Tingsheng Yan,Guangjun Wang

DOI: https://doi.org/10.1088/1742-6596/1915/3/032077

2021-05-01

Journal of Physics: Conference Series

Abstract:Abstract The traditional detection methods of civil engineering are mainly on account of the census detection with typical characteristics of scope, efficiency and cost. These conventional detection methods are mainly on account of voice diagnosis and visual inspection. There is a high demand for the number of samples, otherwise it is difficult to meet the requirements of working accuracy. The iterative maturity of computer intelligent detection technology, its application in the field of civil engineering, greatly promote the improvement of civil engineering detection. On account of this, this paper first analyses the application status of computer intelligent tech in civil engineering, then studies the utilization advantages of computer intelligent detection in civil engineering, and finally gives its specific utilization process.
Development and Application of a CAD-Based Tool to Intersection Channelization

戴继锋,陆化普,王晓坤

DOI: https://doi.org/10.3969/j.issn.1674-0610.2004.04.010

2004-01-01

Abstract:Based on the analysis on characteristics of channelization design, this paper presents the scheme for developing a computer aided tool for intersection channelization. Tasks in developing the software are listed, followed by discussions on the function of the software and technologies involved. With recognition of the key of the development, technical solutions are detailed to ensure the dual direction link between graph?ic data and non-graphic data. Finally, examples are provided, which show that this tool could make the chan?nelization design much more efficient.
Automatic input and management system for engineering drawings

Tang Zesheng

1998-01-01

Abstract:The key technologies of drawing automatic input and management system (DAIMS) for engineering drawings are presented, including the variable grid adaptive thresholding method for uneven drawing, the algorithm of text string extracting and the algorithem of primitive interactive picking, etc. The system can modify, edit, and manage the scanned inputing image of drawings. DAIMS is developed on the UNIX environment and has been used by many users.
Application of Computer in Coal Geological Survey

CAI Zhong-ming,LAI She-an

DOI: https://doi.org/10.3969/j.issn.1008-8725.2013.10.070

2013-01-01

Abstract:How to use modern computer technology to coal geological exploration,geological survey professional information related to data and graphic processing,with good collection and processing,storage of coal geological survey information.Application of drawing and tabulation to replace the old process,to achieve a rapid,correct,orderly,convenient storage and modification to correct for such purpose, successful completion of the original work is very difficult to complete the relevant professional work.
Emergence and development of computer aided design

Hui-zhu LIN,Cun-chen DU,Fang WU

DOI: https://doi.org/10.3969/j.issn.1006-7906.2001.02.014

2001-01-01

Abstract:The emerging background，development and wide application of computer aided design（CAD） were introduced．It was pointed out that the CAD technology inland has a long way to go compared with the advanced technology abroad，and the practical demands and feasibility of technology and economic should be considered in setting up CAD system．
A SCHEME OF AN INTEGRATED CAD SYSTEM

Jian Li

1985-01-01

Chinese Journal of Computers

Abstract:A scheme of an integrated CAD system is presented. The structure of the system and the major functions of its ten subsystems are sketched. This CAD system is centered around the database and oriented to the entire designing process of the digital system. It consists of ten functional subsystems, each of which is used to perform a specific task in the digital system design. One of the main features of the architecture of the system is that all of the functional subsystems are not interconnected with each other, but connected individually with the central CAD database. This system operates with great flexibility and offers apprent practical advatages. The user can employ any one of the functional subsystems whenever needed.

APPLICATION OF COMPUTER GRAPH TECHNOLOGY IN CIVIL ENGINEERING CAD

Research on Technologies of Computer Aided Sketching Design

Applications of Computer-Aided Engineering(CAE) in Chemical Machinery

Application of Graphical Method for Measurement Data Processing Based on CAD

Graphic Marking System Based on Autodesk DWF Viewer

A New Technology of the Integration of a CAD System with a Variety of CAPP Systems

Application Research of Three-Dimensional Technology Aided Design of New Pipe Inserting into Underground Pipe

The Application of CAD Technique in Mechanical Drawing

Application of CAD Technology in Building Decoration Construction

Application Research of Civil Engineering Construction Based on Computer Aided Design Technology

Application of Layer Technique in Jacquard CAD System

The application of CAD in mechanical design

The thinking and practice of engineering drawing CAI

APPLICATION OF CAD SOFTWARE IN 3D MODELING OF ENGINEERING GEOLOGY

Research on the Application of Computer Intelligent Detection in Civil Engineering Technology

Development and Application of a CAD-Based Tool to Intersection Channelization

Automatic input and management system for engineering drawings

Application of Computer in Coal Geological Survey

Emergence and development of computer aided design

A SCHEME OF AN INTEGRATED CAD SYSTEM