Abstract:In this paper, the nonlinear dynamic stability analysis of sandwich beam including AL-foam flexible core and carbon nanotubes-reinforced composite face sheets subjected to axial periodic load are investigated by using generalized differential quadrature method. The flexible core of sandwich beam is made of Aluminum alloy foam with variable mechanical properties in the thickness direction. With considering the high-order geometrical nonlinearity in the core and face sheets, the high-order sandwich panel theory and modified couple stress theory are employed for AL-foam flexible core and face sheets, respectively. The governing nonlinear partial differential equations of dynamic stability are derived from the Hamilton’s principle and then discretized by using generalized differential quadrature method to convert them into a linear system of Mathieu–Hill equations. These formulations lead to nine partial differential equations which are coupled in axial and transverse deformations. The boundaries of the instability region are achieved by Bolotin’s method and are illustrated in the dimensionless nonlinear excitation frequency (Ω NL ) and excitation frequency ratio (Ω NL /Ω L ) to load amplitude plane. A parametric study is carried out to investigate the influence of some important parameters such as slenderness ratio, face sheet thickness, temperature rise, carbon nanotube volume fraction, static load factor, coefficients of Pasternak foundation, and end supports on the nonlinear dynamic instability characteristics of AL-foam core sandwich beam. The numerical results show that with temperature increasing, the nonlinear excitation frequency (Ω NL ) and width of corresponding unstable zone decrease, but dynamic frequency ratio (Ω NL /Ω L ) and associated unstable region increase. With an increase in the application of sandwich structures for compressible core in advanced industries such as spacecraft, high-speed aircraft, naval vessels, transportation, and automobiles, a further interest in the problem-involving dynamic instability of structures has resulted. Because of their applications, sandwich structures are frequently exposed to periodic axial compressive forces and so the dynamic instability has been a very important topic in structural dynamics and is of practical importance in different engineering industries.

Experimental and analytical study of nonlinear bending response of sandwich beams

Lateral instability of sandwich beams under uniform bending

Nonlinear Fracture Analysis of Delamination Crack Jumps in Laminated Composites

Accurate predictions of bending deflections for soft-core sandwich beams subject to concentrated loads

Nonlinear Random Response Characteristics of Viscoelastic Sandwich Beams under Gaussian Excitations

A nonlinear couple stress-based sandwich beam theory

Failure Analysis of Sandwich Beams under Three-Point Bending Based on Theoretical and Numerical Models

Nonlinear Bending of a Sandwich Beam with Metal Foam and GPLRC Face-Sheets Using Chebyshev–Ritz Method: Effects of Agglomeration and Internal Pore

Re-examination of nonlinear vibration, nonlinear bending and thermal postbuckling of porous sandwich beams reinforced by graphene platelets

Bending analysis of functionally graded sandwich beams with general boundary conditions using a modified Fourier series method

Nonlinear Bending of Shear Deformable Anisotropic Laminated Beams Resting on Two-Parameter Elastic Foundations Based on an Exact Bending Curvature Model

Analysis of deformation and failure mechanism of sandwich beams with lattice core under three-point bending load

Nonlinear local response of foam-filled sandwich plates with laminated faces under combined transverse and in-plane loads

Thermal Post-Buckling of Sandwich Beams with Functionally Graded Negative Poisson's Ratio Honeycomb Core

Nonlinear high-order dynamic stability of AL-foam flexible cored sandwich beam with variable mechanical properties and carbon nanotubes-reinforced composite face sheets in thermal environment

Nonlinear Vibration of the Sandwich Beam with Auxetic Honeycomb Core under Thermal Shock

Linear static, geometric nonlinear static and buckling analyses of sandwich composite beams based on higher-order refined zigzag theory

Quasi-static Bending Response and Energy Absorption of a Novel Sandwich Beam with a Reinforced Auxetic Core under the Fixed Boundary at Both Ends

EXPERIMENTAL AND ANALYTICAL EVALUATION OF LATERAL BUCKLING OF FRP COMPOSITE CANTILEVER I-BEAMS

Static and Low-Velocity Impact Behavior of Sandwich Beams with Closed-Cell Aluminum-Foam Core in Three-Point Bending

Nonlinear Bending Analysis of Anisotropic Laminated Tubular Beams Based on Higher-Order Theory Subjected to Different Kinds of Distributed Loads