Abstract:A set of tests with the hollow cylinder apparatus are conducted to simulate the oblique incident seismic waves. Tests are performed with two cyclic stress components involving the horizontal shear stress (torsional shear stress) and the vertical shear stress (stress difference between vertical normal stress and horizontal normal stress) to show an elliptical shape in the orthogonal coordinates of stress difference and shear stress. Then the dynamic characteristics of saturated Fujian standard loose sand, consolidated under isotropic undrained condition and applied with cyclic oblique elliptic stress path, cyclic circular shear, cyclic torsional shear and cyclic triaxial path, are studied. The experiment results show that the development of elastic pore pressure can be classified as "sharp dropping type" and "sharp rising type". The cumulative rates of excess pore water pressure under cyclic circular shear and under cyclic torsional shear are the fastest and the slowest respectively. The normalizing pore pressure is independent of inclination angle of the obliquity of elliptic path, but depends on the ellipticity of cyclic stress path and stress amplitude CSR. Experimental results also indicate that undrained dynamic strength of Fujian sand is closely related to cyclic stress path. The cyclic torsional shearing path and cyclic triaxial path have the highest dynamic strength. The strengths under standard inclined elliptical loading path and under cyclic circular path are lower and the lowest respectively. Approximate circular path can be generated with seismic wave in a particular incident angle. If seismic wave is regarded as vertical incident S wave, the soil liquefaction strength would be overestimated.

Experimental Study of K0 of Anisotropic Sand

Effects of Initial Static Shear on Cyclic Resistance and Pore Pressure Generation of Saturated Sand

Impact of Static Preshearing on Undrained Anisotropy and Shear Characteristics of Sand

Energy-Based Approach to Quantify Cyclic Resistance and Pore Pressure Generation in Anisotropically Consolidated Sand

Experimental study on the coefficient of lateral pressure at rest for calcareous soils

Laboratory Investigation on the Stress-Dependent Anisotropic Shear Wave Velocity (Vs) and Coefficient of Lateral Earth Pressure at Rest (K0) of Granular Materials

EXPERIMENTAL STUDY OF EARTH PRESSURE FOR ANISOTROPIC SAND CONSIDERING LATERAL DISPLACEMENT

Anisotropic and Noncoaxial Behavior of K0-Consolidated Soft Clays under Stress Paths with Principal Stress Rotation

Undrained Anisotropy and Rotational Shear in Granular Soil

Experimental Investigation of Asymptotic State for Anisotropic Sand

Experimental Study on Asymptotic Behaviour of Anisotropic Sand

Estimation of coefficient of earth pressure at rest for coral sand considering the effect of density and stress

Evaluation of Earth Pressure at Active Side for Anisotropic Sand

CENTRIFUGE MODEL EXPERIMENTAL STUDY ON ACTIVE EARTH PRESSURE OF ANISOTROPY SANDY SOILS

Experimental Research On Behaviors Of Saturated Loose Sand Subjected To Oblique Ellipse Stress Path

Investigation on the mechanical properties of a calcareous sand: the role of the initial fabric

Experiment Study on Anisotropy Sands Subjected to Rotation of Principal Stress Axes

Effect of Drained Static Shear on Cyclic Deformation Behavior of K-0-consolidated Sand

Experimental Study of Drained Anisotropy of Granular Soils Involving Rotation of Principal Stress Direction

Monotonic and Cyclic Characteristics of K0-Consolidated Saturated Soft Clay under a Stress Path Involving a Variable Confining Pressure

Shear Modulus and Damping Ratio of Sand–Gravel Mixtures Over a Wide Strain Range