Abstract:A catalytic material is introduced into the polymer matrix to prepare a novel polymeric alkaline electrolyte membrane (AEM) which simultaneously increases ionic conductivity, reduces the fuel cross-over. In this work, the hydroxide anion exchange membrane is mainly composed of poly(vinylalcohol) and alkaline exchange resin. CoCl2 is added into the poly(vinylalcohol) and alkaline exchange resin gel before casting the membrane to introduce catalytic materials. CoCl2 is converted into CoOOH after the reaction with KOH solution. The crystallinity of the polymer matrix decreases and the ionic conductivity of the composite membrane is notably improved by the introduction of Co-species. A direct borohydride fuel cell using the composite membrane exhibits an open circuit voltage of 1.11 V at 30 degrees C, which is notably higher than that of cells using other AEMs. The cell using the composite membrane achieves a maximum power density of 283 mW cm(-2) at 60 degrees C while the cell using the membrane without Co-species only reaches 117 mW cm(-2) at the same conditions. The outstanding performance of the cell using the composite membrane benefits from impregnation of the catalytic Co-species in the membrane, which not only increases the ionic conductivity but also reduces electrode polarization thus improves the fuel cell performance. This work provides a new approach to develop high-performance fuel cells through adding catalysts in the electrolyte membrane.

A Novel Direct Borohydride Fuel Cell Using an Acid–alkaline Hybrid Electrolyte

Hydrogen storage alloys as the anode materials of the direct borohydride fuel cell

Introducing Catalyst in Alkaline Membrane for Improved Performance Direct Borohydride Fuel Cells

Carbon Supported Silver Nanowires with Enhanced Catalytic Activity and Stability Used As A Cathode in A Direct Borohydride Fuel Cell

A Direct Borohydride Fuel Cell Using MnO2-catalyzed Cathode and Hydrogen Storage Alloy Anode

Anodic Oxidation of Alkali Borohydrides Catalyzed by Nickel

Direct Borohydride Fuel Cell Performance Using Hydroxide‐conducting Polymeric Nanocomposite Electrolytes

Direct Hydrazine Borane Fuel Cell Using Non-noble Carbon Supported Polypyrrole Cobalt Hydroxide as Anode Catalyst

FeS As a Promising Cathode Catalyst for Direct Borohydride Fuel Cells

Functionalization of Polyvinyl Alcohol Composite Membrane by CoOOH for Direct Borohydride Fuel Cells

Polyvinyl Alcohol Anion Exchange Resin Composite Membrane with Co@Cu Core–Shell Particles for Direct Borohydride Fuel Cell Applications

Development of the Cathode Catalyst for Direct Borohydride Fuel Cell

Development of the direct borohydride fuel cell

A Fuel Cell Development for Using Borohydrides As the Fuel

Electrocatalysts for the Anodic Oxidation of Borohydrides

A highly stable Cu(OH)<sub>2</sub>-Poly(vinyl alcohol) nanocomposite membrane for dramatically enhanced direct borohydride fuel cell performance

Current status and progress of direct borohydride fuel cell technology development

A Study of the Direct Dimethyl Ether Fuel Cell Using Alkaline Anolyte

Bilayer Anion-Exchange Membrane with Low Borohydride Crossover and Improved Fuel Efficiency for Direct Borohdyride Fuel Cell.

Development of High-Performance Cathode Catalyst of Polypyrrole Modified Carbon Supported CoOOH for Direct Borohydride Fuel Cell

A new application of nickel-boron amorphous alloy nanoparticles: anode-catalyzed direct borohydride fuel cell