Abstract:A new type of scalable MFC was developed based on using alternating graphite fiber brush array anode modules and dual cathode modules in order to simplify construction, operation, and maintenance of the electrodes. The modular MFC design was tested with a single (two-sided) cathode module with a specific surface area of 29 m(2) m(-3) based on a total liquid volume (1.4 L; 20 m(2) m(-3) using the total reactor volume of 2 L), and two brush anode modules. Three different types of spacers were used in the cathode module to provide structural stability, and enhance air flow relative to previous cassette (combined anode-cathode) designs: a low-profile wire spacer; a rigid polycarbonate column spacer; and a flexible plastic mesh spacer. The best performance was obtained using the wire spacer that produced a maximum power density of 1100 +/- 10 mW m(-2) of cathode (32 +/- 0.3 W m-3 based on liquid volume) with an acetate-amended wastewater (COD = 1010 +/- 30 mg L-1), compared to 1010 +/- 10 mW m(-2) for the column and 650 +/- 20 mW m(-2) for the mesh spacers. Anode potentials were unaffected by the different types of spacers. Raw domestic wastewater produced a maximum of 400 +/- 8 mWm(-2) under fed batch conditions (wire-spacers), which is one of the highest power densities for this fuel. Over time the maximum power was reduced to 300 +/- 10 mW m(-2) and 275 +/- 7 mW m(-2) for the two anode compartments, with only slightly less power of 250 +/- 20 mW m(-2) obtained under continuous flow conditions. In fixed-resistance tests, the average COD removal was 57 +/- 5% at a hydraulic retention time of 8 h. These results show that this modular MFC design can both simplify reactor construction and enable relatively high power generation from even relatively dilute wastewater.

Continuous Electricity Generation by A Graphite Granule Baffled Air-Cathode Microbial Fuel Cell

A Graphite-Granule Membrane-Less Tubular Air-Cathode Microbial Fuel Cell for Power Generation under Continuously Operational Conditions

Continuous Electricity Generation with Piggery Wastewater Treatment Using an Anaerobic Baffled Stacking Microbial Fuel Cell

Increased Power Generation in a Continuous Flow MFC with Advective Flow Through the Porous Anode and Reduced Electrode Spacing

Electricity Generation from Organic Wastewater Using a Continuous-Flow Single Chamber Microbial Fuel Cell

Intermittent Contact of Fluidized Anode Particles Containing Exoelectrogenic Biofilms for Continuous Power Generation in Microbial Fuel Cells

Electricity generation in a membrane-less microbial fuel cell with down-flow feeding onto the cathode

Electricity Generation from Molasses Wastewater by an Anaerobic Baffled Stacking Microbial Fuel Cell

Microbial fuel cells with an integrated spacer and separate anode and cathode modules

Experimental Study of Power Generation and COD Removal Efficiency by Air Cathode Microbial Fuel Cell Using Shewanella baltica 20

Electricity generation and brewery wastewater treatment from sequential anode-cathode microbial fuel cell

Performance of Microbial Fuel Cell with Air-cathode

A novel pilot-scale stacked microbial fuel cell for efficient electricity generation and wastewater treatment.

Floating flexible microbial fuel cells for electricity generation and municipal wastewater treatment

Production of electricity from the treatment of continuous brewery wastewater using a microbial fuel cell

Enrichment, performance, and microbial diversity of a thermophilic mediatorless microbial fuel cell

Scaling Up a Novel Denitrifying Microbial Fuel Cell with an Oxic-Anoxic Two Stage Biocathode

Electricity Production by an Overflow-Type Wetted-Wall Microbial Fuel Cell.

Performance of a Dual-Chamber Microbial Fuel Cell Inoculated with Active Soil Microbes for Bioelectricity Generation

Upscaling feasibility of a graphite-based truncated conical microbial fuel cell for bioelectrogenesis through organic wastewater treatment

Performance of Novel Trickling Biocathode Microbial Fuel Cell