Abstract:MgNi-based alloys have been regarded as very promising anode material for nickel-metal hydride battery owing to their electrochemcial capacity much higher than that of AB(5) alloys. However, Mg-Ni alloy anodes generally suffer very serious capacity decay in cycling, which is previously ascribed to the corrosion of Mg in alkali electrolyte in the past decades. To further reveal the capacity fading mechanism of MgNi-based alloys, the electrochemcial hydrogen storage properties of Mg2Ni and amorphous Mg50Ni50 alloys and their microstructural evolution during cycling were comparatively studied. It has been firstly demonstrated that it is the amorphous MgNi phase instead of Mg2Ni phase contributes to electrochemical discharge capacity, because the Mg2NiH4 hardly released hydrogen under electrochemcial conditions. Then, it has been found that the charge input level has significant effect on the cyclic performance of amorphous Mg50Ni50 alloy anode. At full charge of 500 mAh g(-1), the amorphous MgNi phase easily crystallized to the nanocrystalline Mg2NiH4, which leaded to the capacity decay immediately. Comparatively, with the low charge input of 100 mAh g(-1), the discharge capacity of amorphous Mg50Ni50 alloy remained almost unchanged for 425 cycles. The excellent cyclability is attributed to the less hydrogenation-induced crystallization at low charge input. This work clearly demonstrates that the hydrogenation-induced crystallization is a dominating reason for the electrochemical capacity decay in the milled amorphous Mg-Ni anode. It provides a new approach to improve the electrochemcial properties of Mg-Ni alloy electrode by inhibiting the hydrogenation-induced crystallization. (C) 2019 Elsevier Ltd. All rights reserved.

Charge/discharge hysteresis characteristics of an amorphous Mg<sub>50</sub>Ni<sub>50</sub> hydride electrode

Charge/discharge Hysteresis Characteristics of an Amorphous Mg50Ni50 Hydride Electrode

An electrochemical investigation of mechanical alloying of MgNi-based hydrogen storage alloys

Reaction Kinetics of Amorphous Mg50Ni50 Hydride Electrode

Electrode Properties and the Dehydrogenation Process of Amorphous Mg–Ni–La Alloys

Effects of the Amount of Mg Impurity on the Electrochemical Properties of Ml(NiCoMnTi)5 Hydrogen Storage Alloy

Electrochemical Behaviors Of A V3tini0.5hf0.24 Alloy Electrode During Charge-Discharge Cycling

Degradation Mechanism Of The La-Mg-Ni-Based Metal Hydride Electrode La0.7mg0.3ni3.4mn0.1

Degradation Mechanism of the La-Mg-Ni-Based Metal Hydride Electrode La[sub 0.7]Mg[sub 0.3]Ni[sub 3.4]Mn[sub 0.1]

Electrochemical behaviors of a V3TiNi0.56Hf0.24 alloy electrode during charge–discharge cycling

PHASE STRUCTURE AND ELECTROCHEMICAL PROPERTIES OF La-Mg-Ni SYSTEM AB_3 TYPE HYDROGEN STORAGE ELECTRODE ALLOYS

Electrochemical Impedance Study of Discharge Characteristics of Pd Substituted MgNi-based Hydrogen Storage Electrode Alloys

Effect of the La/Mg ratio on the structure and electrochemical properties of LaxMg3-xNi9 (x = 1.6 -2.2) hydrogen storage electrode alloys for nickel-metal hydride batteries

Microstructure and electrochemical properties of amorphous Mg-Fe-Ni hydrogen storage electrode material

Amorphization and Electrochemical Hydrogen Storage Properties of Mechanically Alloyed Mg–Ni

Microstructural Investigation of Electrochemical Hydrogen Storage in Amorphous Mg–Ni–La Alloy

Hydrogenation and Crystallization of Amorphous Phase: A New Mechanism for the Electrochemical Capacity and Its Decay in Milled Mg-Ni Alloys

Characteristics of Hydride Electrodes Using Mg-Ti-Ni-Co-Al-based Alloys Synthesized by Mechanical Milling

Reducing the Electrochemical Capacity Decay of Milled Mg–Ni Alloys: the Role of Stabilizing Amorphous Phase by Ti-substitution

The Electrochemical Evaluation of Ball Milled MgNi-based Hydrogen Storage Alloys

Electrochemical Properties of the La[sub 0.7]mg[sub 0.3]ni[sub 2.65−x]mn[sub 0.1]co[sub 0.75]al[sub X] (x = 0-0.5) Hydrogen Storage Alloy Electrodes