Abstract:Determination of the distribution of a generated acoustic field is valuable for studying ultrasonic transducers, including providing the guidance for transducer design and the basis for analyzing their performance, etc. A method calculating the acoustic field based on laser-measured vibration velocities on the ultrasonic transducer surface is proposed in this paper. Without knowing the inner structure of the transducer, the acoustic field outside it can be calculated by solving the governing partial differential equation (PDE) of the field based on the specified boundary conditions (BCs). In our study, the BC on the transducer surface, i.e. the distribution of the vibration velocity on the surface, is accurately determined by laser scanning measurement of discrete points and follows a data fitting computation. In addition, to ensure the calculation accuracy for the whole field even in an inhomogeneous medium, a finite element method is used to solve the governing PDE based on the mixed BCs, including the discretely measured velocity data and other specified BCs. The method is firstly validated on numerical piezoelectric transducer models. The acoustic pressure distributions generated by a transducer operating in an homogeneous and inhomogeneous medium, respectively, are both calculated by the proposed method and compared with the results from other existing methods. Then, the method is further experimentally validated with two actual ultrasonic transducers used for flow measurement in our lab. The amplitude change of the output voltage signal from the receiver transducer due to changing the relative position of the two transducers is calculated by the proposed method and compared with the experimental data. This method can also provide the basis for complex multi-physical coupling computations where the effect of the acoustic field should be taken into account.

Vibration Sensor Number Requirement in Acoustic Radiation Estimation of a Cylindrical Structure

Prediction and Experiment for Near-Field Sound Radiation of Cylindrical Shells

Sensor number requirements for sound power prediction using two different mode decomposition methods

Velocity sensor number requirements on using mode decomposition methods for structure borne sound power prediction

A Rule of Spatial Sampling on Cylindrical Shells for Predicting Radiated Acoustic Field

A study on velocity sampling for acoustical radiation prediction of rectangular plates

Sound Power Estimation for Beam and Plate Structures Using Polyvinylidene Fluoride Films as Sensors

Determination of regularities that influence the acoustic pressure and accuracy of inertial sensors

Transmission and measurement characteristics evaluation of surface acoustic wave sensor on rotating spindle in machine tools

Calculation of Acoustic Field Based on Laser-Measured Vibration Velocities on Ultrasonic Transducer Surface

Stochastic Micro-Vibration Response of A Spherically Symmetric Piezoelectric Shell Structure As Sensor

Sensor Placement for Structural Damage Detection considering Measurement Uncertainties

Numerical Study of Sound Pressure Distribution in Volume Determination with Acoustic Method

A New Rule of Vibration Sampling for Predicting Acoustical Radiation from Rectangular Plates

An acoustic position sensor

A METHOD TO PREDICT SOUND RADIATION FROM A PLATE-ENDED CYLINDRICAL SHELL EXCITED BY AN EXTERNAL FORCE

The Relationship Between Structural Intensity and Sound Field Characteristics of Cylindrical Shells

Minimum Squared Error Method Based on Modal Analysis for Acoustic Emission Source Location Using Microfiber Coupler Sensor

Vibro-acoustic Characteristics of Cylindrical Shells with Complex Acoustic Boundary Conditions

Study on vibro-acoustic performances of coupled orthogonally stiffened cylindrical shell-inner foundation system using wavenumber analysis method

THE SOUND RADIATION EFFICIENCY OF FINITE LENGTH ACOUSTICALLY THICK CIRCULAR CYLINDRICAL SHELLS UNDER MECHANICAL EXCITATION I: THEORETICAL ANALYSIS