Abstract:The prediction of noise radiated by underwater structures is one of the most important research topics in the field of acoustics. This paper aims to set up an integrated approach for acoustic radiation analysis that could be used to assess and optimize the vibro-acoustic performance of pre-determined design targets, while identifying and quantifying the sound sources responsible for the behaviour. Such an approach, based on numerical procedures or experimental data, enables the fast prediction of sound radiation from a typical submarine cabin (a double cylindrical shell with superstructure). Vibro-acoustic prediction in the low- to mid-frequency range is generally performed through the boundary element method (BEM) or finite element method (FEM). In this paper, a combined usage of the two methodologies is adopted: FEM is used for the structural dynamics and BEM for the acoustic problem resolution. The acoustic field obtained by the FEM/BEM approach is adopted as the reference result. Meanwhile, acoustic transfer vector (ATV) technology is performed with the use of velocity distribution of the cabin. It is verified that the calculation results between the two methods are in substantial agreement, while the ATV method shows greater efficiency. Experimental research on the vibration of a scaled model is also performed. Comparing the experimental and numerical radiation results based on measured vibration data enables the accuracy level of the ATV forecast method to be assessed. From this, it is probable that the fast prediction of sound radiation by use of ATV is an effective approach for rapid evaluation of the vibro-acoustic response in the engine development process.

A New Rule of Vibration Sampling for Predicting Acoustical Radiation from Rectangular Plates

A study on velocity sampling for acoustical radiation prediction of rectangular plates

A Rule of Spatial Sampling on Cylindrical Shells for Predicting Radiated Acoustic Field

A METHOD TO PREDICT SOUND RADIATION FROM A PLATE-ENDED CYLINDRICAL SHELL EXCITED BY AN EXTERNAL FORCE

Vibration and Sound Radiation Analysis of Rectangular Plates Resting on Winkler Foundation in Thermal Environment with Closed Form Solutions

A semi-analytical method using auxiliary sine series for vibration and sound radiation of a rectangular plate with elastic edges

Shaping the Acoustic Radiation of a Vibrating Plate

Response Adjustable Performance of a Visco-Elastomer Sandwich Plate with Harmonic Parameters and Distributed Supported Masses under Random Loading

The large-amplitude vibration of a thin isotropic rectangular plate and calculation of radiated sound power

Passive reconstruction of dispersion curve in plates via flow-induced random vibration: The effect of boundary reflection and sensor placement

Reduction of Sound Radiation from Plate Using Vibration Absorbers

Numerical vibroacoustic analysis of plates with constrained-layer damping patches

Acoustic analysis of damping structure with response surface method

Sound Power Estimation for Beam and Plate Structures Using Polyvinylidene Fluoride Films as Sensors

Structure-borne Sound Attenuation at Corner Interface with Dynamic Vibration Absorber Attached

Hydroelastic Vibration Of Rectangular Plate Placed On Free Water Surface

Sensor number requirements for sound power prediction using two different mode decomposition methods

Sound Radiation from a Fluid-Loaded Plate with Periodic Inhomogeneities of Finite Width

Sound Radiation of Orthogonally Stiffened Laminated Composite Plates under Airborne and Structure Borne Excitations

Time-domain Structural-Acoustic Analysis of Composite Plates Subjected to Moving Dynamic Loads

The Fast Prediction of Sound Radiation from Typical Submarine Cabin Based on Acoustic Transfer Vector