Abstract:The work is devoted to the ultrasonic method for controlling mechanical stresses using ultrasonic head waves. The speed of the head ultrasonic wave is the highest, which allows it to be recorded stably among other types of ultrasonic waves and noises. To determine mechanical stresses, registration of the relative change in the velocity of propagation of the head ultrasonic wave is used, corrected for the change in the measured value caused by the change in the temperature of the test object. Thus, mechanical stresses are not measured directly, but the sources of uncertainty are the results of measurements of the propagation velocity of the head ultrasonic wave, the temperature of the environment and the test object, the coefficients of acoustoelastic and thermoacoustic coupling, and the parameters of the optical-acoustic transducer. The contribution of each of these factors to the results of measurements of mechanical stresses is estimated. On the basis of GOST 34100.3–2017, a method has been developed for asessing the uncertainty of measurements of mechanical stresses by the ultrasonic method using head waves. The dependence of the expanded measurement uncertainty on the value of the measured mechanical stresses was obtained. This dependence shows that measurements of mechanical stresses in the range of less than 100 MPa have an uncertainty of more than 10 % of the measured value. When measuring mechanical stresses over 200 MPa, the measurement uncertainty will not exceed 4 % (at a confidence level of 95 %).The proposed approach to assessing the uncertainty of measurements of mechanical stresses can be useful in the development of requirements for the used measuring instruments, alignment samples and control objects, as well as in the development of methods for monitoring mechanical stresses by the ultrasonic method using an optical-acoustic separate-combined transducer.

Determination of regularities that influence the acoustic pressure and accuracy of inertial sensors

Progress of study on acoustic vector sensor

Study on the Influence of Roughness on the Detection for Mechanical Characteristics of the Machined Surface by Surface Acoustic Wave Dispersion Theory

Determination of Thermally Induced Effects and Design Guidelines of Optomechanical Accelerometers

Vibration Sensor Number Requirement in Acoustic Radiation Estimation of a Cylindrical Structure

New Solid-State Acoustic Motion Sensors: Sensing Potential Estimation for Different Piezo Plate Materials

Acoustoelastic Guided and Surface Waves in Waveguides with Focus on Non-Destructive Testing and Structural Health Monitoring Applications —A Review of Recent Studies

Determination of the absorbed acoustic power of longitudinal vibrations by measuring their amplitude in a chosen area of the waveguide system outside the load

METHODOLOGY FOR EVALUATION THE UNCERTAINTY OF MEASUREMENT OF MECHANICAL STRESS BY THE ULTRASONIC METHOD WITH THE HELP OF AN OPTICAL-ACOUSTIC SEPARATE-COMBINED TRANSDUCER

Acoustic attenuation coefficient measurement in extreme environments: Experimental characterization of uncertainty in multiple-reflection method

Evaluation of the Influence of Surface Roughness Parameters on Ultrasonic Rayleigh Waveforms

High-resolution DOA Estimation Achieved by a Single Acoustic Vector Sensor under Anisotropic Noise

Factors affecting characteristics of acoustic signals in particle impact noise detection for aerospace devices

Investigation of damping effects on low-frequency steady-state acoustical behaviour of coupled spaces

Research and Application of a Novel Sensitivity Measurement Method for Particle Impact Noise Detection Sensors

The Influence of Temperature Disturbance on Space Inertial Sensors

The effect of environmental acoustic noise on optical fibre based velocity and vibration sensor systems

Frequency shift of a PVDF surface acoustic wave sensor on a curved surface

Localization of Hypervelocity Impact- Engendered Damage in Stiffened Curved Structures Using In-Situ Acoustic Emission

Method of vibration power spectral density calculation for spacecraft attached large-size and small-mass equipment units

Reliability of Ultrasonic Distance Measurement in Application to Multi-Rotor MAVs