Abstract:Micro Air Vehicles (MAVs) designed for reconnaissance and difficult to reach missions have excellent potential utility and are of interest for military and civilian applications as flight platforms for optical, acoustic, electronic and chemical sensors for operation in hazardous sites with aerial access. They are autonomous or semiautonomous airborne vehicles, measuring less than 200 meters in any dimension and weighing about 150 grams, accomplishing a useful mission at an affordable cost. Nominal performance goals include real-time imaging, navigation, and communications capabilities, a range of up to 5 kilometers, and a top speed of up to 60 kph, during missions lasting 10 mins to 1 hrs. MAVs may be regarded as six-degree-of-freedom sensor platforms that will enable a broad spectrum of small-unit and special operations. There are two prominent features of MAVs flight: (i) low operating Reynolds number (Re: 10(4)-10(5)), resulting in unfavorable aerodynamic conditions to support controlled flight, and (ii) small physical dimensions, resulting in certain favorable scaling characteristics including structural strength, reduced stall speed, and low inertia. Owing to the low Reynolds number, the aerodynamic performance of all lifting surfaces is degraded. The small scales and speeds also mean that atmospheric turbulence has a severe effect, and small thermal cycle engines that could profit from the high energy densities of fossil fuels are unavailable. It is thus difficult to obtain good flight performance.As the rapid development of microelectronics and Microelectromechanical systems (MEMS) technology, MAVs become a feasible concept. MEMS are extremely small machines in which electronic and mechanical components are combined on a single silicon chip using micromachining techniques. Development of Low Reynolds number aerodynamics design and MEMS-based autopilot system techniques are the near term object. Progresses in sensor, in control and in navigation technologies offer completely new opportunities. This paper deals with MAVs, which are the flying carriers of these advanced sensors. The developments of MAVs around the world, particularly on potential applications, wing model concepts, and onboard avionics, are reviewed at first. The bottleneck and the current situation for the integrated navigation, guidance and control system design in MAVs are then analyzed. The question of whether MEMS can help improve the performance of futuristic MAVs is also pondered.

Reliability of Ultrasonic Distance Measurement in Application to Multi-Rotor MAVs

Application of ultrasonic distance sensors for measuring height as a tool in unmanned aerial vehicles with a stabilized position in the vertical plane

Multi-Ray Modeling of Ultrasonic Sensors and Application for Micro-UAV Localization in Indoor Environments

Wind Speed Measurement by an Inexpensive and Lightweight Thermal Anemometer on a Small UAV

A height-measurement algorithm for rotor UAVs based on multi-layer space-time fusion

Evaluating Unmanned Aerial Vehicles for Vibrational Analysis: Exploiting Integrated Capabilities of Nano-Drones as Nodes in a WSN

Noncontact Distance and Amplitude-Independent Vibration Measurement Based on an Extended DACM Algorithm

Distance Measurement of Contra-Rotating Rotor Blades with Ultrasonic Transducers

Obstacle Avoidance onboard MAVs using a FMCW RADAR

Acoustic Beamforming for Object-relative Distance Estimation and Control in Unmanned Air Vehicles using Propulsion System Noise

Multirotor Motor Failure Detection with Piezo Sensor

Onboard Integrated Avionics And Sensors For Assisting Mavs Missions

Nonlinear recurrence analysis of piezo sensor placement for unmanned aerial vehicle motor failure diagnosis

A New Calibration Method Using Low Cost MEM IMUs to Verify the Performance of UAV-Borne MMS Payloads

A Method Based on Multi-Sensor Data Fusion for UAV Safety Distance Diagnosis

Obstacle Detection and Avoidance Using Ultrasonic Sensors in Autonomous Robots

Multirotor-assisted measurements of wind-induced drift of irregularly shaped objects in aquatic environments

Estimation of Airspeed, Angle of Attack, and Sideslip for Small Unmanned Aerial Vehicles (UAVs) Using a Micro-Pitot Tube

IMU/Magnetometer/Barometer/Mass-Flow Sensor Integrated Indoor Quadrotor UAV Localization with Robust Velocity Updates.

UAV's Rotor Micro-Doppler Feature Extraction Using Integrated Sensing and Communication Signal: Algorithm Design and Testbed Evaluation

Validation of wind measurements from a multirotor RPAS-mounted ultrasonic wind sensor using a ground-based LiDAR system