Abstract:Brake-by-wire systems are one of the key components in intelligent/unmanned vehicles that have attracted worldwide attention. Testing and evaluation of brake-by-wire systems are a significant step during the development of the technology of vehicular braking and further the advancement of intelligent/unmanned vehicles. Using the test bench to simulate different road adhesion coefficients (i.e. road surfaces) and to complete the testing and evaluation of the vehicle braking systems is of great significance and importance. A test bench for simulation of vehicular braking of 1/4 vehicle is presented and investigated in this article. It is composed of a motor, two rollers, a 1/4 vehicle suspension system, a magnetic powder clutch, a flywheel, sensors, a signal acquisition and processing system, and a controller. The wheel and vehicle speeds are simulated by the rollers and flywheel speeds, respectively. The translational kinetic energy of 1/4 vehicle is simulated by the rotational kinetic energy of the flywheel. The signal acquisition and processing system is used to acquire and process the experimental signals, such as rotational speeds and torques during tests. The magnetic powder clutch with adjusted applied currents in the test bench is used to real-timely simulate roads with different adhesion coefficients. Based on the working principle of the test bench and the fundamentals of vehicle dynamics, the prototype of the test bench is established and the simulation approach of the translational kinetic energy of 1/4 vehicle is investigated. The mathematical model of the real-time simulation about roads with different adhesion coefficients based on the magnetic powder clutch with real-time controllable transmitted torque is established. With the built 1/4 vehicle braking systems based on the test bench and road, and the corresponding established models, the comparison and analysis of the simulation results of various road surfaces are conducted. Experiments are sequentially implemented to verify the feasibility and effectiveness of the test bench.

Research on Hardware-In-the-Loop of Automotive Driving Force Control System Based on dSPACE

The Study on the Handling and Stability Test of Vehicles Based on ADMS and WTK

Research and Application of HIL Automatic Test Platform for DCT Control System

Design and Test of Hardware-in-the-loop Platform for Vehicle Chassis CAN System with Intermittent Open and Short Connection Faults

Research on Distributed Hardware-in-loop Simulation Technology in MATLAB

Emergency Braking Control Strategy for High Speed Electric Drive Tracked Vehicle

An Automatic Testing System for Vehicle's Drive Axis Performance Test

Control Strategy and Simulation Verification of Hardware-in-the-loop System of Automotive Steering Device

A Hardware-in-loop Simulation Test-Platform for the Intelligent Vehicle's Steering Control System

Research on hardware-in-the-loop simulation for hybrid powertrain

Application of Integrated Simulation System for Air-Brake TCS Control Development

A Hardware-in-the-Loop V2X Simulation Framework: CarTest.

Hydraulic Pressure Control And Parameter Optimization Of Brake-By-Wire System Based On Driver-Automation Cooperative Driving

xPC Technique Based Hardware-In-the-Loop Simulator for Driver Assistance Systems

Design, modeling, and verification of a test bench for braking simulation of 1/4 vehicle

An Innovative HiL Test Environment with a Fully Integrated Brake System and Automated Brake Performance Evaluation

Control System Modeling for Automotive Brake Test-Bench Based on Discrete Closed-Loop and Phase-Locked Loop

The Development of Dynamic Test Bench for EV Hybrid Brake System

Research on Electronic Brake Force Distribution and Anti-Lock Brake of Vehicle Based on Direct Drive Electro Hydraulic Actuator

Vehicle Dynamics Modeling for Simulator of Vehicle Driver Assistant Systems

Development of a Hardware-in-the-loop Simulation System for Hybrid Electric Vehicle Performance Test