Abstract:Studies on the relationship between resistivity and dynamic rheological properties of carbon black-filled high-density polyethylene (CB/HDPE) composites were carried out. Change of resistivity rho is associated with the dynamic modulus before the positive temperature coefficient/negative temperature coefficient (PTC/NTC) temperature. When the temperature approaches the melting point of HDPE, rho increases rapidly with a decreasing modulus, corresponding to PTC transition. The resistivity-dynamic viscoelasticity relationship in the PTC region can be divided into two parts in which the changes of rho with storage modulus G' and loss modulus G" can be described by the scaling laws given by the critical storage modulus and loss modulus G' (c), and G" (c); adjustable parameters rho'(1c), rho'(2c), rho"(1c) and rho"(2c); and nonlinear exponents n and m, respectively. The accordance between the experimental data and the scaling functions of the dimensionless quantities (G'/G'(c) - 1) and (G"/G"(c) - 1) in the PTC transition region suggests that the rho jump may be the result of a modulus-induced percolation. G'(c) and G"(c) increase, but the four scaling resistivitis, rho'(1c), rho'(2c), rho"(1c), and rho"(2c), decrease with increasing CB concentration, implying that the microstructure change of the composites is the determinant factor for the PTC behavior and the resistivity-dynamic modulus relationship. However, rho'(2c) and rho"(2c) exhibit no scaling dependence. It is suggested that a threshold concentration exists for the modulus of the composites on the basis of examining the plot of both G'(c) and G"(c) against CB concentration. The scaling laws G' similar to Phi(x) and G" similar to Phi(y) hold for the concentration dependence of the critical modulus when Phi > Phi(c) and the estimated values of x and y are 1.10 +/- 0. 10 and 0.89 +/- 0.29, respectively. The resistivity-dynamic modulus can shift to form a master curve. The horizontal factors a(G') and a(G") and the vertical factors a' and a" are relevant to the concentration dependence of the dynamic modulus or PTC behavior. It is believed that the former would be involved in changing the mechanical microstructure formed by the complicated interaction of CB particle and polymer segments, and the latter would be involved in the overall changes of conducting a network during the PTC transition region. (C) 2003 Wiley Periodicals, Inc.

RELATIONSHIP BETWEEN UNIAXIAL DEFORMATION AND PIEZORESISTANCE FOR HDPE/CB COMPOSITES

Effect of Uniaxial Pressures on the Resistance of High Density Polyethylene/Carbon Black Composites

STUDY ON PIEZORESISTIVITY OF HIGH DENSITY POLYETHYLENE/GRAPHITE SEMI-CONDUCTIVE COMPOSITES

Effect Of Polyethersulfone On The Mechanical And Rheological Properties Of Polyetherimide-Modified Epoxy Systems

Time-dependent uniaxial piezoresistive behavior of high-density polyethylene/short carbon fiber conductive composites

Effect of Uniaxial Pressure on Conduction Behavior of Carbon Black Filled Poly(methyl Vinyl Siloxane) Composites

Percolation Transition and Hydrostatic Piezoresistance for Carbon Black Filled Poly(methylvinylsilioxane) Vulcanizates

The Elastic Properties and Piezochromism of Polyimide Films under High Pressure

Influence of Interfacial Adhesion on Stress-Strain Properties of Highly Filled Polyethylene

Variable Percolation Threshold of Composites with Fiber Fillers under Compression

Morphology and physical properties of composites based on high-density polyethylene/propylene-ethylene random copolymers blends and carbon black

Modeling and experimental analysis of piezoresistive behavior in conductive porous elastomer under significantly large deformation

Mechanism And Properties Of Piezoresistive In Rubber-Matrix Nanocomposites

The incompressibility assumption and piezoresistivity in stretchable conductive composites

Relationship Between Electrical Conductive and Rheological Percolations for Fibres/Hdpe Composites

Time-concentration Superpositioning Principle Accounting for the Reinforcement and Dissipation of High-Density Polyethylene Composites Melts

Conductivity and piezoresistivity of conductive carbon black filled polymer composite

Relationship Between the Positive Temperature Coefficient of Resistivity and Dynamic Rheological Behavior for Carbon Black‐filled High‐density Polyethylene

Nonlinear Conductive Properties and Scaling Behavior of Conductive Particle Filled High-Density Polyethylene Composites

Piezoelectric Properties of PVDF Modified 3-3 Type Cement-Based Piezoelectric Composites

Estimation of the Agglomeration Structure for Conductive Particles and Fiber-Filled High-Density Polyethylene Through Dynamic Rheological Measurements