Abstract:Because of their beautiful appearance, strong crossing ability, and reasonable stress performance, the application of tied steel box arch bridges is becoming more and more extensive. Bridge construction monitoring can control and adjust the deviation state to ensure the stress and linear state of the bridge after completion. This study carried out a symmetrical construction monitoring analysis and completed state evaluation of the newly built Dafeng River Bridge in Guangxi Province based on the finite element method. MIDAS Civil finite element software is used for simulation analysis to calculate the deformation and stress of the tied steel box arch bridge at the construction and completion stages. The tensile and compressive stress of the main arch and transverse brace, as well as the cumulative displacements of the main arch and lattice beam, are symmetrically distributed. The maximum tensile and compressive stresses are 15.1 MPa and 74.6 MPa, respectively, less than the specification's allowable value. Meanwhile, for the completed bridge under the loading combinations of serviceability limit state and bearing capacity ultimate limit state, the stress of the main arch, transverse brace, and lattice beam meets the specification requirements. The maximum cable forces of the suspender and tie rod under the bearing capacity ultimate limit state are 2189.4 kN and 2991.2 kN, and their corresponding minimum safety factors are 3.2 and 2.7. In addition, the deviations between the on-site monitoring and the finite element theoretical values are within the specification allowable range for the cable force of the suspender and tie rod and the bridge deck alignment. It indicates that the bridge construction monitoring effect is reasonable and ideal, and the symmetrically finite element simulation analysis can provide a theoretical basis for construction monitoring.

3D simulation analysis of construction process on frame wharf with a great range of stage in inland rivers

Simulation Analysis of Girder Transport Process on the Box Girder of Hangzhou Bay Bridge

Analysis of the influence of open-cut undercrossing of a national highway in Hangzhou on the existing municipal viaduct piers

Stochastic Seismic Response Analysis of Long-span Continuous Rigid Frame Bridge

Field Test and Analysis for the Static and Dynamic Behaviour of Multi-Box Steel Concrete Composite Girder Bridge

Analysis of Static and Dynamic Behaviors of Continuous Rigid Frame Bridge with V-Shaped Piers and Seismic Response

SIMULATION FOR CONSTRUCTION PROCESS OF P.C. CONTINUOUS RIGID FRAME BRIDGE

Displacement and Force Analyses of Piles in the Pile-Caisson Composite Structure under Eccentric Inclined Loading Considering Different Stratum Features

Design Scheme and Structure Analysis of Dongwuyang Submerged Floating Tunnel

STUDY ON THE FULL SCALE SEGMENTAL MODEL OF TOWER OF CABLE STAYED BRIDGE OF THE SECOND YANGTZE RIVER BRIDGE IN NANJING

4D Full-Scale Finite Element Analysis in Bridge Engineering

Three-dimensional numerical analysis of deformation and mechanical behavior of deep excavations adjacent to river

Deformation and internal force of multitower suspension bridges: Numerical modeling and analytical analysis

Finite Element Analysis in Dynamic Conditions of Bridge Crane Beam

Symmetrically Construction Monitoring Analysis and Completed State Evaluation of a Tied Steel Box Arch Bridge Based on Finite Element Method

An Improved Time Domain Approach for Analysis of Floating Bridges Based on Dynamic Finite Element Method and State-Space Model

Simulation Analysis of Reinforced Concrete Beam-Supported Aqueduct

Effects of spatial inhomogeneity of wave excitations on structural behaviors of multi-span floating bridges

Structural strength analysis of curved submarine pipes during pipeline connection

Study On Construction Safety And Simulation Of Large-Scale Structures

Analysis of Piers Influence on Navigation Based on Numerical Simulation of Bridge Area Flow