Abstract:Polyimide-block-poly(dimethyl siloxane) copolymer was synthesized by a two-step process, initiated by coupling anhydride terminated poly(amic acid), AT-PAA with amino terminated poly(dimethyl siloxane), (NH 2 ) 2 -PDMS to form poly(amic acid)-block-poly(dimethyl siloxane). The resulting copolymer is then thermally treated to produce polyimide-block-poly(dimethyl siloxane), PI-PDMS. Because of the high glass transition temperature, Tg of polyimide, it is usually cured at a high temperature of about 300°C for over 2.5 h. Copolymerization of polyimide with polysiloxane, reduces the imidization temperature while maintaining high thermomechanical properties. A series of instruments were used to monitor the progress of copolymerization. The time-based analysis of the product of copolymerization enables the optimization of the structure and properties of the copolymers. The chemical structure and composition of the copolymer were studied by Fourier Transform Infrared Spectroscopy, (FT-IR). The incorporation of PDMS blocks into the copolymer and the degree of imidization of the polyimide block increased with increasing reaction time. The change in the viscosity of the copolymerizing solution was monitored by simple shear viscometry conducted with the Brookfield Viscometer. The reported increase in solution viscosity with increasing copolymerization time is associated with increasing molecular weight of the copolymer. The intrinsic viscosity of the copolymer solution was measured as a function of copolymerization time and it was found that the intrinsic viscosity of the copolymer solution increased with increasing reaction time. The glass transition temperature (Tg) and the thermal stability of the copolymer were determined by differential scanning calorimetry, DSC and thermogravimetric analysis, and TGA, respectively. Between 25°C and 420°C, the copolymers synthesized in this study show two glass transition temperatures due to the polyimide, PI block at around 380°C and another peak associated with PDMS plasticized polyimide at about 290–300°C. The two Tg peaks observed in the DSC thermogram are believed to be indicative of the structure of a block copolymer. TGA analysis shows that the thermoxidative stability of the copolymers increased with increasing reaction time, due to the incorporation of increased amount of PDMS unit into the copolymer. The combination of increasing molecular weight of copolymer, higher degree of imidization of polyimide blocks and enhanced thermoxidative stability may translate into improved flame retardancy of copolymers. This suggested enhancement in flame retardancy in air atmosphere, is believed to be due the incorporated PDMS blocks, which can be converted into silica, SiO2, a recognized thermally stable material.

Studies On Imidization Behaviors Of Differently Processed Samples Of Poly(Imide-Alt-Amic Ester) Prepared From Mdpm And 6fda

Kinetic Analysis of the Imidization of Poly(styrene‐co‐maleic Anhydride) with Aniline in the Melt

Synthesis of poly(propylene glycol)-grafted polyimide precursors and preparation of nanoporous polyimides

Studies on Polyimide Foams Prepared from Poly(Ester-amine Salt) Precursor Powder

Preparation and Dielectric Properties of Polyimide/silica Nanocomposite Films Prepared from Sol–gel and Blending Process

Effects of pre-imidization on rheological behaviors of polyamic acid solution and thermal mechanical properties of polyimide film: an experiment and molecular dynamics simulation

Analysis of the kinetics of soluble polyimide formation by the thermal imidization of polyamic acids in amide solvents with allowance for the side reaction of anhydride group hydrolysis

Preparation and characterization of aromatic polyimides derived from 4,4′-oxydiphthalic anhydride and 4,4′-diaminodiphenylmethane with different alkyl substituents

Synthesis and Characterization of Thermotropic Liquid Crystalline Poly(ester Imide)s

A Facile Method to Synthesize Semicrystalline Poly(ester amide)s from 2,5-Furandicarboxylic Acid, 1,10-Decanediol, and Crystallizable Amido Diols

Synthesis and Optical Properties of Two Series of Soluble Acridine-Containing Copolyimides

Surface Studies of Polyimide Thin Films Via Surface-Enhanced Raman Scattering and Second Harmonic Generation

Monomer Dependence of Colorless and Transparent Polyimide Films: Thermomechanical Properties, Optical Transparency, and Solubility

The Properties of Poly(ester amide)s Based on Dimethyl 2,5-Furanedicarboxylate as a Function of Methylene Sequence Length in Polymer Backbone

Synthesis and characterization of organosoluble ditrifluoromethylated aromatic polyimides

Novel Polyimide-block-poly(dimethyl siloxane) copolymers: Effect of time on the synthesis and thermal properties

Preparation and characterization of PMR-type polyimides from furan-based diamines

Metastable Isotactic Poly(Methyl Methacrylate) Prepared by Freeze-Extracting Solutions in Poly(Ethylene Glycol)

Structural evolution from poly(amic acid) to polyimide fibers during thermal imidization process

Effect of simultaneously introduced bulky pendent group and amide unit on optical transparency and dimensional stability of polyimide film

Preparation, Characterization And Selective Solubility Of Diels-Alder Addition Polyimides