Abstract:The possible fracture process of interior texture and its reinforcing mechanism to properties. Polyacrylonitrile (PAN)‐based precursor fibers with different mechanical properties prepared by wet‐spinning and its correlation with microstructure was researched, the primary structural factors that affecting its properties were analyzed. The tensile strength and modulus of precursor fibers increased from 4.63 cN/dtex to 9.16 cN/dtex and 99.09 cN/dtex to 168.92 cN/dtex, respectively, with the increase in crystallinity from 69.29% to 87.84% and orientation degree increased from 83.95% to 93.81%, high performance precursor fibers could be achieved by decrease in the crystallite size and interlayer spacing, these aggregation structure plays a decisive role to the mechanical properties of fibers. The integrality of aggregation structure and properties could reflected by boiling water shrinkage behavior and glass transition temperature from the side. The fracture morphology of fibers with different properties were studied by scanning electron microscope (SEM) and three fracture characteristics were observed, PF1 and PF3 presented the radial extended fracture without microfibril pull out, radial cluster fracture with the pull out of microfibril for PF2, PF4–PF6, together with the axial splitting pattern in PF6, which was revealed by microfibrils/fibrils in longitudinal and transverse combined with solution etching. Precursor fibers with less voids, without serious skin‐core, continuous arrangement, tightly stacked, well‐developed and complete oriented microfibrils/fibrils, exhibited excellent mechanical properties. Possible fracture process was given from the perspective of aggregation structure and microfibrils/fibrils, which become dominant factors determining properties of precursor fibers. Improve the performance could be achieved by regulating surface structure and cross‐sectional shape. As one of the main structural factors that determining properties, by reducing diameter could minimize the numbers and sizes of defects.

Nanoindentation Tests and Research on the Fractal Characteristic of Polymer Nanofibers

Tensile Performance of Polymer Nanocomposites with Randomly Dispersed Carbon Nanothreads

Novel method for mechanical characterization of polymeric nanofibers

Modeling and characterization of the mechanical properties of nanofiber yarn

A new insight into the mechanical properties of nanobiofibers and vibrational behavior of atomic force microscope beam considering them as the samples

In Situ Nanoindentation Mechanical Property of Films by Atomic Force Microscope

Atomic force microscopy-based nanoindentation technique for characterizing the transverse and shear moduli of flax fibers

Nanomechanics of Advanced Polymer Fibres

Local mechanical properties of electrospun fibers correlate to their internal nanostructure

Multi-Point Nanoindentation Method to Determine Mechanical Anisotropy in Nanofibrillar Thin Films

Application of Nanoindentation Tests in the Research of Nanomaterials

Investigation of the Nanoscale Elastic Recovery of A Polymer Using an Atomic Force Microscopy-Based Method

Research Progress of Characterization Method of Performance of Fiber Reinforced Polymer

Tensile Testing and Surface Characterization of Electrospun PCL Nanofibers

Nanoindentation and Mechanical Properties of Materials at Submicro- and Nanoscale Levels: Recent Results and Achievements

Quantitative Correlation between Hierarchical Nanofiller Structure and Rheology of Polymer/Fumed Silica Nanocomposites

A Novel Nano-Spherical Tip for Improving Precision in Elastic Modulus Measurements of Polymer Materials via Atomic Force Microscopy

Carbon Nanotube Fibers: Monitoring a Micromechanical Process in Macroscale Carbon Nanotube Films and Fibers (adv. Mater. 5/2009)

Determination of the interfacial properties of carbon fiber reinforced polymers using nanoindentation

Comprehensive research on the correlation between microstructure and mechanical properties of polyacrylonitrile‐based precursor fibers prepared by wet‐spinning

A Finite Element Method for Determining the Mechanical Properties of Electrospun Nanofibrous Mats